On Fri, Feb 23 2001, Steven Walter wrote:
> After upgrading to 2.4.2, gcd or any audio CD player will work. The
> attached chunk of dmesg is the messages produced by attempting to play
> them. The player just loops through all tracks, playing nothing.
> Ripping CD's a la cdparanoia still works.
>
> If its any consequence, my CD-ROM is now detected as a CD-ROM/DVD-ROM.
> Is this also a problem, or merely an optimization in the boot-detection
> routines?
That doesn't matter, the boot info just means it could be either
a cdrom or a dvd drive.
But these:
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid command operation code -- (asc=0x20, ascq=0x00)
The failed "Play Audio MSF" packet command was:
"47 00 00 2d 2b 1b 39 38 00 00 00 00 "
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid command operation code -- (asc=0x20, ascq=0x00)
The failed "Test Unit Ready" packet command was:
"00 00 00 00 00 00 00 00 00 00 00 00 "
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid command operation code -- (asc=0x20, ascq=0x00)
The failed "Test Unit Ready" packet command was:
"00 00 00 00 00 00 00 00 00 00 00 00 "
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid command operation code -- (asc=0x20, ascq=0x00)
The failed "Play Audio MSF" packet command was:
"47 00 00 37 04 28 39 38 00 00 00 00 "
look very odd. It's basically saying that these required commands
are not implemented by the drive. 2.4.1 worked fine?!
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
