Hi
...maybe it is a bit off-topic here, sorry guys! Phil, you better asked
this Q on comp.os.linux.hardware / setup / whatever, am I right?
I got this card working fine with 2.4.x. Currently configured as modules,
I even managed to get them to autoload. Looks like you (also) are using
OSS. So, will try to recap main points of my configuration (that box is
at home):
in .config sound, OSS, CS4232, OPL3 - all as modules (to produce sound.o,
soundcore.o, cs4232.0, ad1848.o, uart401.o, opl3.o - I think)
Although in .config I DO have PnP enabled, I am still running isapnp on
startup (perhaps I don't need to do that, do I?)
in modules.conf
alias char-major-14 cs4232
pre-install cs4232 modprobe "-k" sound
post-install cs4232 modprobe "-k" opl3
options cs4232 ... (IO, dma, IRQ,...)
I think, this is it. May be I confused something above - but you should be
able to guess what I meant:-) If not - I'll send you the exact
config. lines from home.
HTH
Guennadi
On Thu, 22 Feb 2001, Phil Smith wrote:
> I have come to the pont of having to mail this list in search of a greater
> understanding of what I could possibably be doing wrong in reguards to
> enabling my sound card. Under 2.2.X I was able to include the cards
> configuration during the config, yes, I understand that this has changed
> in opt for other methods. These methods though are very strange and
> somewhat unclear in the current documentation set. I have tried several
> possible built-in and modular configs with the results being the same, below
> I will include information that may or may not be what is necessary to get
> possible solutions to this, but odd or exact suggestions will be greatly
> appreciated. Thank you, Phil Smith
>
> The mother board is a pr440fx intel board.
> Dual ppro 200 cpus
> Linux version 2.4.1 (root@gezr) (gcc version 2.95.3 20010125 (prerelease)) #8 SMP
>Thu Feb 22 17:44:42 CST 2001
>
> dmesg information concerning the card
>
> PCI->APIC IRQ transform: (B0,I17,P0) -> 18
> Limiting direct PCI/PCI transfers.
> Activating ISA DMA hang workarounds.
> isapnp: Scanning for Pnp cards...
> isapnp: Card 'CS4236B Audio'
> isapnp: 1 Plug & Play card detected total
>
> ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
> YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
>
>
>
>
> lilo config line (kernel boot parameter?)
> append="cs4232=0x534,5,0,3,0x330,9"
>
> 14 sound shows in /proc/devices
>
>
> initial lines from /proc/isapnp (all sound card coresponding devices
> show as "not active" activation can be achieved via isapnptools and
> no sound working from that):
>
> Card 1 'CSC0b35:CS4236B Audio' PnP version 1.0 Product version 0.1
> Logical device 0 'CSC0000:WSS/SB'
> Device is not active
> Resources 0
> Priority preferred
> Port 0x534-0x534, align 0x3, size 0x4, 16-bit address decoding
>
>
> P.S. I perfer to not use modules for sound, that may be odd, I'm not sure
> about that, but I see no reason why what I have chosen to use, not to work,
> I can only hope that I have missed an important note somewhere and a simple
> answer will raise its head.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
