From: Ulf Hansson <ulf.hans...@linaro.org>
Some scalable prcmu clocks needs to be handled in conjuction with the
ape opp 100 voltage. A new prcmu clock type clk_prcmu_opp_volt_scalable
is implemented to handle this.
Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>
---
drivers/clk/ux500/clk-prcmu.c | 55 +++++++++++++++++++++++++++++++++++++++++
drivers/clk/ux500/clk.h | 6 +++++
2 files changed, 61 insertions(+)
diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c
index 930cdfe..04577ca 100644
--- a/drivers/clk/ux500/clk-prcmu.c
+++ b/drivers/clk/ux500/clk-prcmu.c
@@ -133,6 +133,40 @@ out_error:
hw->init->name);
}
+static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
+{
+ int err;
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ err = prcmu_request_ape_opp_100_voltage(true);
+ if (err) {
+ pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n",
+ __func__, hw->init->name);
+ return err;
+ }
+
+ err = prcmu_request_clock(clk->cg_sel, true);
+ if (err)
+ prcmu_request_ape_opp_100_voltage(false);
+
+ return err;
+}
+
+static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+
+ if (prcmu_request_clock(clk->cg_sel, false))
+ goto out_error;
+ if (prcmu_request_ape_opp_100_voltage(false))
+ goto out_error;
+ return;
+
+out_error:
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ hw->init->name);
+}
+
static struct clk_ops clk_prcmu_scalable_ops = {
.prepare = clk_prcmu_prepare,
.unprepare = clk_prcmu_unprepare,
@@ -167,6 +201,17 @@ static struct clk_ops clk_prcmu_opp_gate_ops = {
.recalc_rate = clk_prcmu_recalc_rate,
};
+static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
+ .prepare = clk_prcmu_opp_volt_prepare,
+ .unprepare = clk_prcmu_opp_volt_unprepare,
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+ .is_enabled = clk_prcmu_is_enabled,
+ .recalc_rate = clk_prcmu_recalc_rate,
+ .round_rate = clk_prcmu_round_rate,
+ .set_rate = clk_prcmu_set_rate,
+};
+
static struct clk *clk_reg_prcmu(const char *name,
const char *parent_name,
u8 cg_sel,
@@ -250,3 +295,13 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name,
return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
&clk_prcmu_opp_gate_ops);
}
+
+struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags)
+{
+ return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
+ &clk_prcmu_opp_volt_scalable_ops);
+}
diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h
index 836d7d1..f36eeed 100644
--- a/drivers/clk/ux500/clk.h
+++ b/drivers/clk/ux500/clk.h
@@ -45,4 +45,10 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name,
u8 cg_sel,
unsigned long flags);
+struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name,
+ const char *parent_name,
+ u8 cg_sel,
+ unsigned long rate,
+ unsigned long flags);
+
#endif /* __UX500_CLK_H */
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
