On 09/13/2012 05:18 AM, Norbert Preining wrote:
Hi everyone,(please cc) see $subject ... No warning, nothing in the logs, but pinging my router I get things like: --- 192.168.0.1 ping statistics --- 376 packets transmitted, 315 received, +33 errors, 16% packet loss, time 405164ms rtt min/avg/max/mdev = 0.873/10077.793/95935.698/25387.102 ms, pipe 68 or --- 192.168.0.1 ping statistics --- 1252 packets transmitted, 1225 received, 2% packet loss, time 1252976ms rtt min/avg/max/mdev = 0.941/764.171/19929.265/2758.225 ms, pipe 20 Has anyone *ever* seen a mdev of 25387.102 ms ??? At the same time I am pinging the same router from an iphone with a steady stream of 40ms or so, no problem whatsoever ... $ lspci -v -s 03:00.0 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. Device e020 Flags: bus master, fast devsel, latency 0, IRQ 17 I/O ports at 2000 [size=256] Memory at f0500000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 88-55-22-fe-ff-4c-e0-00 Kernel driver in use: rtl8192se
When you post the output of lspci, always include the -nn or -nnv switches. That way, we get the PCI ID. As there are several varieties of the RTL8192SE, I need that info. In addition, what are the details of your AP - STA configuration. What is the distance? Is it 802.11n or 802.11g? What is the signal strength as indicated by iwconfig or a scan?
Larry -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
