>> -----Original Message-----
>> From: Karicheri, Muralidharan
>> Sent: Thursday, August 30, 2012 2:17 PM
>> To: dw...@infradead.org; artem.bityuts...@linux.intel.com; 
>> dbarysh...@gmail.com;
>> computersforpe...@gmail.com; linux-...@lists.infradead.org; linux-
>> ker...@vger.kernel.org; mturque...@linaro.org
>> Cc: Karicheri, Muralidharan
>> Subject: [PATCH] mtd:nand:clk: preparation for switch to common clock 
>> framework
>> 
>> As a first step towards migrating davinci platforms to use common clock
>> framework, replace all instances of clk_enable() with clk_prepare_enable()
>> and clk_disable() with clk_disable_unprepare(). Until the platform is
>> switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
>> adds a might_sleep() call and would work without any issues.
>> 
>> This will make it easy later to switch to common clk based implementation
>> of clk driver from DaVinci specific driver.
>> 
>> Signed-off-by: Murali Karicheri <m-kariche...@ti.com>
>> ---
>>  drivers/mtd/nand/davinci_nand.c |    6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/mtd/nand/davinci_nand.c 
>> b/drivers/mtd/nand/davinci_nand.c
>> index d94b03c..6b8cf27 100644
>> --- a/drivers/mtd/nand/davinci_nand.c
>> +++ b/drivers/mtd/nand/davinci_nand.c
>> @@ -656,7 +656,7 @@ static int __init nand_davinci_probe(struct 
>> platform_device
>> *pdev)
>>              goto err_clk;
>>      }
>> 
>> -    ret = clk_enable(info->clk);
>> +    ret = clk_prepare_enable(info->clk);
>>      if (ret < 0) {
>>              dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
>>                      ret);
>> @@ -767,7 +767,7 @@ syndrome_done:
>> 
>>  err_scan:
>>  err_timing:
>> -    clk_disable(info->clk);
>> +    clk_disable_unprepare(info->clk);
>> 
>>  err_clk_enable:
>>      clk_put(info->clk);
>> @@ -804,7 +804,7 @@ static int __exit nand_davinci_remove(struct 
>> platform_device
>> *pdev)
>> 
>>      nand_release(&info->mtd);
>> 
>> -    clk_disable(info->clk);
>> +    clk_disable_unprepare(info->clk);
>>      clk_put(info->clk);
>> 
>>      kfree(info);
>> --
>> 1.7.9.5

subsystem owner,

Could you please review and apply this patch as needed? We need to get this 
upstream before submitting the patch for Common clock framework support for 
mach-davinci. If I need to follow a specific procedure to get this merged, 
please direct me to a process page.

Thanks.

Murali Karicheri
Software Design Engineer

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to