On Fri, 2012-08-24 at 01:55 +0000, Huang, Xiong wrote:
> Thanks for all your feedback. I have another question need your help.
>
> This NIC has special function that could receive/transmit simple
> packet when it's in sleep (D3) state.
> It will help someone wakeup his/her machine even it's behind a router.
> This function is disabled by default. To enable it, the NIC should be
> configured by app.
> My question is which interface can I select to configure(write to) the
> NIC register ?
There are standard operations to configure Wake-on-LAN (commands
ETHTOOL_{G,S}WOL, driver methods ethtool_ops::{get,set}_wol) and WOL
modes including MagicPacket.
If you want to implement a more sophisticated packet matching mode that
requires more details than struct ethtool_wolinfo, then you may need to
define new operations.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
