This header was used by the driver "stallion", but the driver has been removed as a result of migration 2.4 -> 2.6 and the header is still present in the system and is not currently used by any driver. We can safely remove it.
Signed-off-by: Alexander Shiyan <shc_w...@mail.ru> --- include/linux/sc26198.h | 533 ----------------------------------------------- 1 files changed, 0 insertions(+), 533 deletions(-) delete mode 100644 include/linux/sc26198.h diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h deleted file mode 100644 index 7ca35ab..0000000 --- a/include/linux/sc26198.h +++ /dev/null @@ -1,533 +0,0 @@ -/*****************************************************************************/ - -/* - * sc26198.h -- SC26198 UART hardware info. - * - * Copyright (C) 1995-1998 Stallion Technologies - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/*****************************************************************************/ -#ifndef _SC26198_H -#define _SC26198_H -/*****************************************************************************/ - -/* - * Define the number of async ports per sc26198 uart device. - */ -#define SC26198_PORTS 8 - -/* - * Baud rate timing clocks. All derived from a master 14.7456 MHz clock. - */ -#define SC26198_MASTERCLOCK 14745600L -#define SC26198_DCLK (SC26198_MASTERCLOCK) -#define SC26198_CCLK (SC26198_MASTERCLOCK / 2) -#define SC26198_BCLK (SC26198_MASTERCLOCK / 4) - -/* - * Define internal FIFO sizes for the 26198 ports. - */ -#define SC26198_TXFIFOSIZE 16 -#define SC26198_RXFIFOSIZE 16 - -/*****************************************************************************/ - -/* - * Global register definitions. These registers are global to each 26198 - * device, not specific ports on it. - */ -#define TSTR 0x0d -#define GCCR 0x0f -#define ICR 0x1b -#define WDTRCR 0x1d -#define IVR 0x1f -#define BRGTRUA 0x84 -#define GPOSR 0x87 -#define GPOC 0x8b -#define UCIR 0x8c -#define CIR 0x8c -#define BRGTRUB 0x8d -#define GRXFIFO 0x8e -#define GTXFIFO 0x8e -#define GCCR2 0x8f -#define BRGTRLA 0x94 -#define GPOR 0x97 -#define GPOD 0x9b -#define BRGTCR 0x9c -#define GICR 0x9c -#define BRGTRLB 0x9d -#define GIBCR 0x9d -#define GITR 0x9f - -/* - * Per port channel registers. These are the register offsets within - * the port address space, so need to have the port address (0 to 7) - * inserted in bit positions 4:6. - */ -#define MR0 0x00 -#define MR1 0x01 -#define IOPCR 0x02 -#define BCRBRK 0x03 -#define BCRCOS 0x04 -#define BCRX 0x06 -#define BCRA 0x07 -#define XONCR 0x08 -#define XOFFCR 0x09 -#define ARCR 0x0a -#define RXCSR 0x0c -#define TXCSR 0x0e -#define MR2 0x80 -#define SR 0x81 -#define SCCR 0x81 -#define ISR 0x82 -#define IMR 0x82 -#define TXFIFO 0x83 -#define RXFIFO 0x83 -#define IPR 0x84 -#define IOPIOR 0x85 -#define XISR 0x86 - -/* - * For any given port calculate the address to use to access a specified - * register. This is only used for unusual access, mostly this is done - * through the assembler access routines. - */ -#define SC26198_PORTREG(port,reg) ((((port) & 0x07) << 4) | (reg)) - -/*****************************************************************************/ - -/* - * Global configuration control register bit definitions. - */ -#define GCCR_NOACK 0x00 -#define GCCR_IVRACK 0x02 -#define GCCR_IVRCHANACK 0x04 -#define GCCR_IVRTYPCHANACK 0x06 -#define GCCR_ASYNCCYCLE 0x00 -#define GCCR_SYNCCYCLE 0x40 - -/*****************************************************************************/ - -/* - * Mode register 0 bit definitions. - */ -#define MR0_ADDRNONE 0x00 -#define MR0_AUTOWAKE 0x01 -#define MR0_AUTODOZE 0x02 -#define MR0_AUTOWAKEDOZE 0x03 -#define MR0_SWFNONE 0x00 -#define MR0_SWFTX 0x04 -#define MR0_SWFRX 0x08 -#define MR0_SWFRXTX 0x0c -#define MR0_TXMASK 0x30 -#define MR0_TXEMPTY 0x00 -#define MR0_TXHIGH 0x10 -#define MR0_TXHALF 0x20 -#define MR0_TXRDY 0x00 -#define MR0_ADDRNT 0x00 -#define MR0_ADDRT 0x40 -#define MR0_SWFNT 0x00 -#define MR0_SWFT 0x80 - -/* - * Mode register 1 bit definitions. - */ -#define MR1_CS5 0x00 -#define MR1_CS6 0x01 -#define MR1_CS7 0x02 -#define MR1_CS8 0x03 -#define MR1_PAREVEN 0x00 -#define MR1_PARODD 0x04 -#define MR1_PARENB 0x00 -#define MR1_PARFORCE 0x08 -#define MR1_PARNONE 0x10 -#define MR1_PARSPECIAL 0x18 -#define MR1_ERRCHAR 0x00 -#define MR1_ERRBLOCK 0x20 -#define MR1_ISRUNMASKED 0x00 -#define MR1_ISRMASKED 0x40 -#define MR1_AUTORTS 0x80 - -/* - * Mode register 2 bit definitions. - */ -#define MR2_STOP1 0x00 -#define MR2_STOP15 0x01 -#define MR2_STOP2 0x02 -#define MR2_STOP916 0x03 -#define MR2_RXFIFORDY 0x00 -#define MR2_RXFIFOHALF 0x04 -#define MR2_RXFIFOHIGH 0x08 -#define MR2_RXFIFOFULL 0x0c -#define MR2_AUTOCTS 0x10 -#define MR2_TXRTS 0x20 -#define MR2_MODENORM 0x00 -#define MR2_MODEAUTOECHO 0x40 -#define MR2_MODELOOP 0x80 -#define MR2_MODEREMECHO 0xc0 - -/*****************************************************************************/ - -/* - * Baud Rate Generator (BRG) selector values. - */ -#define BRG_50 0x00 -#define BRG_75 0x01 -#define BRG_150 0x02 -#define BRG_200 0x03 -#define BRG_300 0x04 -#define BRG_450 0x05 -#define BRG_600 0x06 -#define BRG_900 0x07 -#define BRG_1200 0x08 -#define BRG_1800 0x09 -#define BRG_2400 0x0a -#define BRG_3600 0x0b -#define BRG_4800 0x0c -#define BRG_7200 0x0d -#define BRG_9600 0x0e -#define BRG_14400 0x0f -#define BRG_19200 0x10 -#define BRG_28200 0x11 -#define BRG_38400 0x12 -#define BRG_57600 0x13 -#define BRG_115200 0x14 -#define BRG_230400 0x15 -#define BRG_GIN0 0x16 -#define BRG_GIN1 0x17 -#define BRG_CT0 0x18 -#define BRG_CT1 0x19 -#define BRG_RX2TX316 0x1b -#define BRG_RX2TX31 0x1c - -#define SC26198_MAXBAUD 921600 - -/*****************************************************************************/ - -/* - * Command register command definitions. - */ -#define CR_NULL 0x04 -#define CR_ADDRNORMAL 0x0c -#define CR_RXRESET 0x14 -#define CR_TXRESET 0x1c -#define CR_CLEARRXERR 0x24 -#define CR_BREAKRESET 0x2c -#define CR_TXSTARTBREAK 0x34 -#define CR_TXSTOPBREAK 0x3c -#define CR_RTSON 0x44 -#define CR_RTSOFF 0x4c -#define CR_ADDRINIT 0x5c -#define CR_RXERRBLOCK 0x6c -#define CR_TXSENDXON 0x84 -#define CR_TXSENDXOFF 0x8c -#define CR_GANGXONSET 0x94 -#define CR_GANGXOFFSET 0x9c -#define CR_GANGXONINIT 0xa4 -#define CR_GANGXOFFINIT 0xac -#define CR_HOSTXON 0xb4 -#define CR_HOSTXOFF 0xbc -#define CR_CANCELXOFF 0xc4 -#define CR_ADDRRESET 0xdc -#define CR_RESETALLPORTS 0xf4 -#define CR_RESETALL 0xfc - -#define CR_RXENABLE 0x01 -#define CR_TXENABLE 0x02 - -/*****************************************************************************/ - -/* - * Channel status register. - */ -#define SR_RXRDY 0x01 -#define SR_RXFULL 0x02 -#define SR_TXRDY 0x04 -#define SR_TXEMPTY 0x08 -#define SR_RXOVERRUN 0x10 -#define SR_RXPARITY 0x20 -#define SR_RXFRAMING 0x40 -#define SR_RXBREAK 0x80 - -#define SR_RXERRS (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN) - -/*****************************************************************************/ - -/* - * Interrupt status register and interrupt mask register bit definitions. - */ -#define IR_TXRDY 0x01 -#define IR_RXRDY 0x02 -#define IR_RXBREAK 0x04 -#define IR_XONXOFF 0x10 -#define IR_ADDRRECOG 0x20 -#define IR_RXWATCHDOG 0x40 -#define IR_IOPORT 0x80 - -/*****************************************************************************/ - -/* - * Interrupt vector register field definitions. - */ -#define IVR_CHANMASK 0x07 -#define IVR_TYPEMASK 0x18 -#define IVR_CONSTMASK 0xc0 - -#define IVR_RXDATA 0x10 -#define IVR_RXBADDATA 0x18 -#define IVR_TXDATA 0x08 -#define IVR_OTHER 0x00 - -/*****************************************************************************/ - -/* - * BRG timer control register bit definitions. - */ -#define BRGCTCR_DISABCLK0 0x00 -#define BRGCTCR_ENABCLK0 0x08 -#define BRGCTCR_DISABCLK1 0x00 -#define BRGCTCR_ENABCLK1 0x80 - -#define BRGCTCR_0SCLK16 0x00 -#define BRGCTCR_0SCLK32 0x01 -#define BRGCTCR_0SCLK64 0x02 -#define BRGCTCR_0SCLK128 0x03 -#define BRGCTCR_0X1 0x04 -#define BRGCTCR_0X12 0x05 -#define BRGCTCR_0IO1A 0x06 -#define BRGCTCR_0GIN0 0x07 - -#define BRGCTCR_1SCLK16 0x00 -#define BRGCTCR_1SCLK32 0x10 -#define BRGCTCR_1SCLK64 0x20 -#define BRGCTCR_1SCLK128 0x30 -#define BRGCTCR_1X1 0x40 -#define BRGCTCR_1X12 0x50 -#define BRGCTCR_1IO1B 0x60 -#define BRGCTCR_1GIN1 0x70 - -/*****************************************************************************/ - -/* - * Watch dog timer enable register. - */ -#define WDTRCR_ENABALL 0xff - -/*****************************************************************************/ - -/* - * XON/XOFF interrupt status register. - */ -#define XISR_TXCHARMASK 0x03 -#define XISR_TXCHARNORMAL 0x00 -#define XISR_TXWAIT 0x01 -#define XISR_TXXOFFPEND 0x02 -#define XISR_TXXONPEND 0x03 - -#define XISR_TXFLOWMASK 0x0c -#define XISR_TXNORMAL 0x00 -#define XISR_TXSTOPPEND 0x04 -#define XISR_TXSTARTED 0x08 -#define XISR_TXSTOPPED 0x0c - -#define XISR_RXFLOWMASK 0x30 -#define XISR_RXFLOWNONE 0x00 -#define XISR_RXXONSENT 0x10 -#define XISR_RXXOFFSENT 0x20 - -#define XISR_RXXONGOT 0x40 -#define XISR_RXXOFFGOT 0x80 - -/*****************************************************************************/ - -/* - * Current interrupt register. - */ -#define CIR_TYPEMASK 0xc0 -#define CIR_TYPEOTHER 0x00 -#define CIR_TYPETX 0x40 -#define CIR_TYPERXGOOD 0x80 -#define CIR_TYPERXBAD 0xc0 - -#define CIR_RXDATA 0x80 -#define CIR_RXBADDATA 0x40 -#define CIR_TXDATA 0x40 - -#define CIR_CHANMASK 0x07 -#define CIR_CNTMASK 0x38 - -#define CIR_SUBTYPEMASK 0x38 -#define CIR_SUBNONE 0x00 -#define CIR_SUBCOS 0x08 -#define CIR_SUBADDR 0x10 -#define CIR_SUBXONXOFF 0x18 -#define CIR_SUBBREAK 0x28 - -/*****************************************************************************/ - -/* - * Global interrupting channel register. - */ -#define GICR_CHANMASK 0x07 - -/*****************************************************************************/ - -/* - * Global interrupting byte count register. - */ -#define GICR_COUNTMASK 0x0f - -/*****************************************************************************/ - -/* - * Global interrupting type register. - */ -#define GITR_RXMASK 0xc0 -#define GITR_RXNONE 0x00 -#define GITR_RXBADDATA 0x80 -#define GITR_RXGOODDATA 0xc0 -#define GITR_TXDATA 0x20 - -#define GITR_SUBTYPEMASK 0x07 -#define GITR_SUBNONE 0x00 -#define GITR_SUBCOS 0x01 -#define GITR_SUBADDR 0x02 -#define GITR_SUBXONXOFF 0x03 -#define GITR_SUBBREAK 0x05 - -/*****************************************************************************/ - -/* - * Input port change register. - */ -#define IPR_CTS 0x01 -#define IPR_DTR 0x02 -#define IPR_RTS 0x04 -#define IPR_DCD 0x08 -#define IPR_CTSCHANGE 0x10 -#define IPR_DTRCHANGE 0x20 -#define IPR_RTSCHANGE 0x40 -#define IPR_DCDCHANGE 0x80 - -#define IPR_CHANGEMASK 0xf0 - -/*****************************************************************************/ - -/* - * IO port interrupt and output register. - */ -#define IOPR_CTS 0x01 -#define IOPR_DTR 0x02 -#define IOPR_RTS 0x04 -#define IOPR_DCD 0x08 -#define IOPR_CTSCOS 0x10 -#define IOPR_DTRCOS 0x20 -#define IOPR_RTSCOS 0x40 -#define IOPR_DCDCOS 0x80 - -/*****************************************************************************/ - -/* - * IO port configuration register. - */ -#define IOPCR_SETCTS 0x00 -#define IOPCR_SETDTR 0x04 -#define IOPCR_SETRTS 0x10 -#define IOPCR_SETDCD 0x00 - -#define IOPCR_SETSIGS (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD) - -/*****************************************************************************/ - -/* - * General purpose output select register. - */ -#define GPORS_TXC1XA 0x08 -#define GPORS_TXC16XA 0x09 -#define GPORS_RXC16XA 0x0a -#define GPORS_TXC16XB 0x0b -#define GPORS_GPOR3 0x0c -#define GPORS_GPOR2 0x0d -#define GPORS_GPOR1 0x0e -#define GPORS_GPOR0 0x0f - -/*****************************************************************************/ - -/* - * General purpose output register. - */ -#define GPOR_0 0x01 -#define GPOR_1 0x02 -#define GPOR_2 0x04 -#define GPOR_3 0x08 - -/*****************************************************************************/ - -/* - * General purpose output clock register. - */ -#define GPORC_0NONE 0x00 -#define GPORC_0GIN0 0x01 -#define GPORC_0GIN1 0x02 -#define GPORC_0IO3A 0x02 - -#define GPORC_1NONE 0x00 -#define GPORC_1GIN0 0x04 -#define GPORC_1GIN1 0x08 -#define GPORC_1IO3C 0x0c - -#define GPORC_2NONE 0x00 -#define GPORC_2GIN0 0x10 -#define GPORC_2GIN1 0x20 -#define GPORC_2IO3E 0x20 - -#define GPORC_3NONE 0x00 -#define GPORC_3GIN0 0x40 -#define GPORC_3GIN1 0x80 -#define GPORC_3IO3G 0xc0 - -/*****************************************************************************/ - -/* - * General purpose output data register. - */ -#define GPOD_0MASK 0x03 -#define GPOD_0SET1 0x00 -#define GPOD_0SET0 0x01 -#define GPOD_0SETR0 0x02 -#define GPOD_0SETIO3B 0x03 - -#define GPOD_1MASK 0x0c -#define GPOD_1SET1 0x00 -#define GPOD_1SET0 0x04 -#define GPOD_1SETR0 0x08 -#define GPOD_1SETIO3D 0x0c - -#define GPOD_2MASK 0x30 -#define GPOD_2SET1 0x00 -#define GPOD_2SET0 0x10 -#define GPOD_2SETR0 0x20 -#define GPOD_2SETIO3F 0x30 - -#define GPOD_3MASK 0xc0 -#define GPOD_3SET1 0x00 -#define GPOD_3SET0 0x40 -#define GPOD_3SETR0 0x80 -#define GPOD_3SETIO3H 0xc0 - -/*****************************************************************************/ -#endif -- 1.7.8.6 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
