On Wed, Aug 08, 2012 at 12:32:39PM -0500, Matt Sealey wrote:
[...]
> I'm going to do a trapse through and find where Russell nacked Dave's
> thumb-aware
> rewrite.. would you mind if you have any of these boards seeing if it
> really DOES
There was no NAK because I didn't get as far as posting the patch,
mostly because of the doubt about whether this code is ever relevant
on Thumb2-capable hardware.
If somebody with some old imx hardware that definitely relies on this
wants to pick it up and test it, it might still be useful.
I don't know whether I still have the original patch, but I think the
only think I did was to swap the roles of r13 and r12. In the original
code r12 is only used as a base register, which is permissible usage
for r13 in Thumb-2. Those two registers appear private to the fiq
handler, so I don't think the change will break anything, but I'd be
more confident is somebody is able to test it.
Cheers
---Dave
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
index 8397a2d..3589afb 100644
--- a/arch/arm/plat-mxc/ssi-fiq.S
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -35,19 +35,19 @@
.global imx_ssi_fiq_tx_buffer
imx_ssi_fiq_start:
- ldr r12, imx_ssi_fiq_base
+ ldr r13, imx_ssi_fiq_base
/* TX */
ldr r11, imx_ssi_fiq_tx_buffer
/* shall we send? */
- ldr r13, [r12, #SSI_SIER]
- tst r13, #SSI_SIER_TFE0_EN
+ ldr r12, [r13, #SSI_SIER]
+ tst r12, #SSI_SIER_TFE0_EN
beq 1f
/* TX FIFO empty? */
- ldr r13, [r12, #SSI_SISR]
- tst r13, #SSI_SISR_TFE0
+ ldr r12, [r13, #SSI_SISR]
+ tst r12, #SSI_SISR_TFE0
beq 1f
mov r10, #0x10000
@@ -56,34 +56,34 @@ imx_ssi_fiq_start:
add r11, r11, r10
- ldrh r13, [r11]
- strh r13, [r12, #SSI_STX0]
+ ldrh r12, [r11]
+ strh r12, [r13, #SSI_STX0]
- ldrh r13, [r11, #2]
- strh r13, [r12, #SSI_STX0]
+ ldrh r12, [r11, #2]
+ strh r12, [r13, #SSI_STX0]
- ldrh r13, [r11, #4]
- strh r13, [r12, #SSI_STX0]
+ ldrh r12, [r11, #4]
+ strh r12, [r13, #SSI_STX0]
- ldrh r13, [r11, #6]
- strh r13, [r12, #SSI_STX0]
+ ldrh r12, [r11, #6]
+ strh r12, [r13, #SSI_STX0]
add r10, #8
- lsr r13, r8, #16 /* r13: buffer size */
- cmp r10, r13
- lslgt r8, r13, #16
+ lsr r12, r8, #16 /* r12: buffer size */
+ cmp r10, r12
+ lslgt r8, r12, #16
addle r8, #8
1:
/* RX */
/* shall we receive? */
- ldr r13, [r12, #SSI_SIER]
- tst r13, #SSI_SIER_RFF0_EN
+ ldr r12, [r13, #SSI_SIER]
+ tst r12, #SSI_SIER_RFF0_EN
beq 1f
/* RX FIFO full? */
- ldr r13, [r12, #SSI_SISR]
- tst r13, #SSI_SISR_RFF0
+ ldr r12, [r13, #SSI_SISR]
+ tst r12, #SSI_SISR_RFF0
beq 1f
ldr r11, imx_ssi_fiq_rx_buffer
@@ -94,31 +94,31 @@ imx_ssi_fiq_start:
add r11, r11, r10
- ldr r13, [r12, #SSI_SACNT]
- tst r13, #SSI_SACNT_AC97EN
+ ldr r12, [r13, #SSI_SACNT]
+ tst r12, #SSI_SACNT_AC97EN
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11]
+ ldr r12, [r13, #SSI_SRX0]
+ strh r12, [r11]
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11, #2]
+ ldr r12, [r13, #SSI_SRX0]
+ strh r12, [r11, #2]
/* dummy read to skip slot 12 */
- ldrne r13, [r12, #SSI_SRX0]
+ ldrne r12, [r13, #SSI_SRX0]
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11, #4]
+ ldr r12, [r13, #SSI_SRX0]
+ strh r12, [r11, #4]
- ldr r13, [r12, #SSI_SRX0]
- strh r13, [r11, #6]
+ ldr r12, [r13, #SSI_SRX0]
+ strh r12, [r11, #6]
/* dummy read to skip slot 12 */
- ldrne r13, [r12, #SSI_SRX0]
+ ldrne r12, [r13, #SSI_SRX0]
add r10, #8
- lsr r13, r9, #16 /* r13: buffer size */
- cmp r10, r13
- lslgt r9, r13, #16
+ lsr r12, r9, #16 /* r12: buffer size */
+ cmp r10, r12
+ lslgt r9, r12, #16
addle r9, #8
1:
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
