Ville Herva wrote:
>
> It looks like ac6 (which I believe includes the patch you posted) is
> still a no-go with 7892. The boot halts and it just prints this once a
> second:
>
> (SCSI0:0:3:1) Synchronous at 160 Mbyte/sec offset 31
> (SCSI0:0:3:1) CRC error during data in phase
> (SCSI0:0:3:1) CRC error in intermediate CRC packet
Check your cables, especially the connector on the card and the drive. Look
for any possible bent pins. The message you are seeing is *usually*, but not
always, a legitimate data corruption issue. It doesn't show up under the
5.2.1 driver because it limits your Quantum drive to 80MByte/s and that
particular speed doesn't include CRC checking. On this driver you have to be
running at 160MByte/s before CRC checking is enabled.
--
Doug Ledford <[EMAIL PROTECTED]> http://people.redhat.com/dledford
Please check my web site for aic7xxx updates/answers before
e-mailing me about problems
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
