>I still get corruption with "I/O Recovery Time" enabled :-(
>
>I don't get corruption with the BIOS "normal" settings (1004D).
>
>I might update my BIOS to the latest BIOS in case it changes any other
>settings.
I'm using an Abit KT7 m/board, which uses the same KT133 chipset that I
believe you are all talking about. Note this is distinct from the KT7-RAID
which has a UDMA-100 RAID chipset on it in addition to the normal IDE
bridge. I've had no problems with disk corruption, despite turning
everything I dare in the BIOS to "full optimisation" settings - this
includes the "Fast CPU Command Decode" and "Enhance Chipset Performance".
The CPU is a Duron 700MHz, and the drives in question are a Seagate
Barracuda ST310210A on hda and a TEAC CD-540E on hdc. /sbin/hdparm reports
both drives as NOT using DMA, I might try switching it on and seeing what
happens.
... half an hour later, i actually try it. Machine appears to be locked
while performing hdparm -t /dev/hda, but waiting to see if it's actually a
timeout. Performance is abysmal when UDMA is off, incidentally - less than
5Mb/sec from this 7200rpm drive. The 10,000rpm IBM SCSI drive also in that
machine benchmarks at around 35Mb/sec.
... after about 10 minutes waiting, while adding to this e-mail, the box is
still hung. Hmph... *RESET*
--------------------------------------------------------------
from: Jonathan "Chromatix" Morton
mail: [EMAIL PROTECTED] (not for attachments)
big-mail: [EMAIL PROTECTED]
uni-mail: [EMAIL PROTECTED]
The key to knowledge is not to rely on people to teach you it.
Get VNC Server for Macintosh from http://www.chromatix.uklinux.net/vnc/
-----BEGIN GEEK CODE BLOCK-----
Version 3.12
GCS$/E/S dpu(!) s:- a20 C+++ UL++ P L+++ E W+ N- o? K? w--- O-- M++$ V? PS
PE- Y+ PGP++ t- 5- X- R !tv b++ DI+++ D G e+ h+ r- y+
-----END GEEK CODE BLOCK-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
