Do not trust the second channel to ATA devices.
Only ATAPI can live there.
I watch it all day long eat my second drives.
The OSB4 is not a pretty thing to play with, and I will have the chance to
fix the CSB5 before it goes final.
Cheers,
On Fri, 2 Feb 2001, Dunlap, Randy wrote:
> I'm also getting a ton of these, along with lots of
> file corruption. I could handle the timeouts and
> rebooting every once in awhile if I didn't also have
> the corruption.
>
> Do I have some incorrect IDE parameters?
>
> (using 2.4.0, not 2.4.1)
> dual Pentium III 933 MHz (STL2 board)
> SAMSUNG 20 GB IDE hard drive
> ServerWorks chipset
>
> details----------------------------------
>
> Feb 2 19:34:51 localhost kernel: Linux version 2.4.0
> ([EMAIL PROTECTED]) (gcc version 2.95.3 19991030 (prerelease))
> #34 SMP Tue Jan 30 17:49:24 PST 2001
> Feb 2 19:35:00 localhost kernel: DMI table at 0x000EF5C0.
> Feb 2 19:35:00 localhost kernel: BIOS Vendor: Intel Corporation
> Feb 2 19:35:01 localhost kernel: BIOS Version:
> STL20.86B.0016.P01.0010111108
> Feb 2 19:35:01 localhost kernel: BIOS Release: 10/11/2000
> Feb 2 19:35:01 localhost kernel: System Vendor: Intel.
> Feb 2 19:35:01 localhost kernel: Product Name: STL2.
> Feb 2 19:35:01 localhost kernel: Version .
> Feb 2 19:35:01 localhost kernel: Serial Number .
> Feb 2 19:35:01 localhost kernel: Board Vendor: Intel.
> Feb 2 19:35:01 localhost kernel: Board Name: STL2.
> Feb 2 19:35:01 localhost kernel: Board Version: 133-639718.
> Feb 2 19:35:01 localhost kernel: Asset Tag: 0000000000000000.
> Feb 2 19:35:01 localhost kernel: Uniform Multi-Platform E-IDE driver
> Revision: 6.31
> Feb 2 19:35:02 localhost kernel: ide: Assuming 33MHz system bus speed for
> PIO modes; override with idebus=xx
> Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: IDE controller on PCI
> bus 00 dev 79
> Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: chipset revision 0
> Feb 2 19:35:02 localhost kernel: ServerWorks OSB4: not 100% native mode:
> will probe irqs later
> Feb 2 19:35:02 localhost kernel: hda: SAMSUNG SV2006D fc2_17, ATA DISK
> drive
> Feb 2 19:35:02 localhost kernel: hdb: TOSHIBA CD-ROM XM-6402B, ATAPI CDROM
> drive
> Feb 2 19:35:02 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Feb 2 19:35:02 localhost kernel: hda: 40142592 sectors (20553 MB) w/480KiB
> Cache, CHS=2498/255/63
> Feb 2 19:35:02 localhost kernel: hdb: ATAPI 32X CD-ROM drive, 256kB Cache
> Feb 2 19:35:02 localhost kernel: Uniform CD-ROM driver Revision: 3.12
> Feb 2 19:35:02 localhost kernel: Partition check:
> Feb 2 19:35:02 localhost kernel: hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
>
> /dev/hda:
> Model=SAMSUNG SV2006D fc2_17, FwRev=LS100, SerialNo=V7**BT0521
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4
> BuffType=DualPortCache, BuffSize=480kB, MaxMultSect=16, MultSect=off
> CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=40142592
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: sdma0 sdma1 sdma2 *mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3
> udma4
>
> /dev/hda:
> I/O support = 0 (default 16-bit)
>
> CPU0 CPU1
> 0: 15519 9063 IO-APIC-edge timer
> 1: 404 289 IO-APIC-edge keyboard
> 2: 0 0 XT-PIC cascade
> 12: 0 0 IO-APIC-edge PS/2 Mouse
> 14: 21517 20366 IO-APIC-edge ide0
> 18: 138 121 IO-APIC-level eth0
> NMI: 24511 24512
> LOC: 24491 24492
> ERR: 0
>
> 00:0f.1 IDE interface: Relience Computer: Unknown device 0211 (prog-if 8a
> [Master SecP PriP])
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 set
> Region 4: I/O ports at 5440 [size=16]
>
>
> ~Randy_________________________________________
> ________________________________________
> Michael D. Black wrote:
> Happens every night on both hda and hdc -- no sure yet what triggers it but
> it is repeatable. Has happened since I've installed this machine with all
> the 2.4.x series.
> Jan 31 00:34:16 kernel: hdc: timeout waiting for DMA
> Jan 31 00:34:16 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
> only: 14
> Jan 31 00:34:16 kernel: hdc: irq timeout: status=0x58 { DriveReady
> SeekComplete DataRequest }
> Jan 31 00:34:26 kernel: hdc: timeout waiting for DMA
> Jan 31 00:34:26 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
> only: 14
> Jan 31 00:34:26 kernel: hdc: irq timeout: status=0x58 { DriveReady
> SeekComplete DataRequest }
> Jan 31 00:34:36 kernel: hdc: timeout waiting for DMA
> Jan 31 00:34:36 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
> only: 14
> Jan 31 00:34:36 kernel: hdc: irq timeout: status=0x58 { DriveReady
> SeekComplete DataRequest }
> Jan 31 00:34:46 kernel: hdc: timeout waiting for DMA
> Jan 31 00:34:46 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
> only: 14
> Jan 31 00:34:46 kernel: hdc: irq timeout: status=0x58 { DriveReady
> SeekComplete DataRequest }
> Jan 31 00:34:46 kernel: hdc: DMA disabled
> Jan 31 00:34:46 i kernel: ide1: reset: success
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------
ASL, Inc. Toll free: 1-877-ASL-3535
1757 Houret Court Fax: 1-408-941-2071
Milpitas, CA 95035 Web: www.aslab.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
