Hi Richard,
On Sat, Jul 07, 2012 at 03:48:56PM +0200, Richard Weinberger wrote:
> Hi!
>
> While building a kernel for an ARM board the following build error came
> across:
>
> drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
> drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of
> function 'irq_to_gpio' [-Werror=implicit-function-declaration]
>
> .config is attached.
> Happens on 3.4.4 and Linus's tree as of today.
Could you please try the patch below? I have had it for a long time but
could not find anyone to test it.
Thanks.
--
Dmitry
Input: eeti_ts - do not use irq_to_gpio
From: Dmitry Torokhov <dmitry.torok...@gmail.com>
irq_to_gpio is not available on many platforms. Let's switch to using
one-shot level interrupts with threaded IRQ handlers that should stay
active as long as there is data.
Reported-by: Olof Johansson <o...@lixom.net>
Signed-off-by: Dmitry Torokhov <d...@mail.ru>
---
drivers/input/touchscreen/eeti_ts.c | 166 ++++++++++++-----------------------
1 file changed, 56 insertions(+), 110 deletions(-)
diff --git a/drivers/input/touchscreen/eeti_ts.c
b/drivers/input/touchscreen/eeti_ts.c
index 503c709..4d875e5 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -46,9 +46,6 @@ MODULE_PARM_DESC(flip_y, "flip y coordinate");
struct eeti_ts_priv {
struct i2c_client *client;
struct input_dev *input;
- struct work_struct work;
- struct mutex mutex;
- int irq, irq_active_high;
};
#define EETI_TS_BITDEPTH (11)
@@ -60,26 +57,18 @@ struct eeti_ts_priv {
#define REPORT_BIT_HAS_PRESSURE (1 << 6)
#define REPORT_RES_BITS(v) (((v) >> 1) + EETI_TS_BITDEPTH)
-static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv)
-{
- return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high;
-}
-
-static void eeti_ts_read(struct work_struct *work)
+static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
{
+ struct eeti_ts_priv *priv = dev_id;
+ struct i2c_client *client = priv->client;
+ struct input_dev *input = priv->input;
+ unsigned int x, y, res, pressed;
+ int rc;
char buf[6];
- unsigned int x, y, res, pressed, to = 100;
- struct eeti_ts_priv *priv =
- container_of(work, struct eeti_ts_priv, work);
-
- mutex_lock(&priv->mutex);
-
- while (eeti_ts_irq_active(priv) && --to)
- i2c_master_recv(priv->client, buf, sizeof(buf));
- if (!to) {
- dev_err(&priv->client->dev,
- "unable to clear IRQ - line stuck?\n");
+ rc = i2c_master_recv(client, buf, sizeof(buf));
+ if (rc < 0) {
+ dev_err(&client->dev, "i2c_master_recv failed, error: %d", rc);
goto out;
}
@@ -103,46 +92,22 @@ static void eeti_ts_read(struct work_struct *work)
y = EETI_MAXVAL - y;
if (buf[0] & REPORT_BIT_HAS_PRESSURE)
- input_report_abs(priv->input, ABS_PRESSURE, buf[5]);
+ input_report_abs(input, ABS_PRESSURE, buf[5]);
- input_report_abs(priv->input, ABS_X, x);
- input_report_abs(priv->input, ABS_Y, y);
- input_report_key(priv->input, BTN_TOUCH, !!pressed);
- input_sync(priv->input);
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+ input_report_key(input, BTN_TOUCH, pressed);
+ input_sync(input);
out:
- mutex_unlock(&priv->mutex);
-}
-
-static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
-{
- struct eeti_ts_priv *priv = dev_id;
-
- /* postpone I2C transactions as we are atomic */
- schedule_work(&priv->work);
-
return IRQ_HANDLED;
}
-static void eeti_ts_start(struct eeti_ts_priv *priv)
-{
- enable_irq(priv->irq);
-
- /* Read the events once to arm the IRQ */
- eeti_ts_read(&priv->work);
-}
-
-static void eeti_ts_stop(struct eeti_ts_priv *priv)
-{
- disable_irq(priv->irq);
- cancel_work_sync(&priv->work);
-}
-
static int eeti_ts_open(struct input_dev *dev)
{
struct eeti_ts_priv *priv = input_get_drvdata(dev);
- eeti_ts_start(priv);
+ enable_irq(priv->client->irq);
return 0;
}
@@ -151,17 +116,17 @@ static void eeti_ts_close(struct input_dev *dev)
{
struct eeti_ts_priv *priv = input_get_drvdata(dev);
- eeti_ts_stop(priv);
+ disable_irq(priv->client->irq);
}
static int __devinit eeti_ts_probe(struct i2c_client *client,
const struct i2c_device_id *idp)
{
- struct eeti_ts_platform_data *pdata;
+ const struct eeti_ts_platform_data *pdata = client->dev.platform_data;
struct eeti_ts_priv *priv;
struct input_dev *input;
unsigned int irq_flags;
- int err = -ENOMEM;
+ int err;
/*
* In contrast to what's described in the datasheet, there seems
@@ -171,25 +136,15 @@ static int __devinit eeti_ts_probe(struct i2c_client
*client,
*/
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(&client->dev, "failed to allocate driver data\n");
- goto err0;
- }
-
- mutex_init(&priv->mutex);
input = input_allocate_device();
-
- if (!input) {
- dev_err(&client->dev, "Failed to allocate input device.\n");
- goto err1;
+ if (!priv || !input) {
+ dev_err(&client->dev, "failed to memory\n");
+ err = -ENOMEM;
+ goto err_free_mem;
}
- input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
- input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0);
- input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0);
- input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0);
+ priv->client = client;
+ priv->input = input;
input->name = client->name;
input->id.bustype = BUS_I2C;
@@ -197,49 +152,47 @@ static int __devinit eeti_ts_probe(struct i2c_client
*client,
input->open = eeti_ts_open;
input->close = eeti_ts_close;
- priv->client = client;
- priv->input = input;
- priv->irq = client->irq;
-
- pdata = client->dev.platform_data;
-
- if (pdata)
- priv->irq_active_high = pdata->irq_active_high;
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- irq_flags = priv->irq_active_high ?
- IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+ input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0);
- INIT_WORK(&priv->work, eeti_ts_read);
- i2c_set_clientdata(client, priv);
input_set_drvdata(input, priv);
- err = input_register_device(input);
- if (err)
- goto err1;
+ irq_flags = pdata && pdata->irq_active_high ?
+ IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW;
+ irq_flags |= IRQF_ONESHOT;
- err = request_irq(priv->irq, eeti_ts_isr, irq_flags,
- client->name, priv);
- if (err) {
+ err = request_threaded_irq(client->irq, NULL, eeti_ts_isr,
+ irq_flags, client->name, priv);
+ if (err < 0) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
- goto err2;
+ goto err_free_mem;
}
/*
- * Disable the device for now. It will be enabled once the
+ * Disable the IRQ for now. It will be enabled once the
* input device is opened.
*/
- eeti_ts_stop(priv);
+ disable_irq(client->irq);
+ err = input_register_device(input);
+ if (err)
+ goto err_free_irq;
+
+ i2c_set_clientdata(client, priv);
device_init_wakeup(&client->dev, 0);
+
return 0;
-err2:
- input_unregister_device(input);
- input = NULL; /* so we dont try to free it below */
-err1:
+err_free_irq:
+ free_irq(client->irq, priv);
+err_free_mem:
input_free_device(input);
kfree(priv);
-err0:
+
return err;
}
@@ -247,20 +200,14 @@ static int __devexit eeti_ts_remove(struct i2c_client
*client)
{
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
- free_irq(priv->irq, priv);
- /*
- * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
- * so that device still works if we reload the driver.
- */
- enable_irq(priv->irq);
-
+ free_irq(client->irq, priv);
input_unregister_device(priv->input);
kfree(priv);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int eeti_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -270,12 +217,12 @@ static int eeti_ts_suspend(struct device *dev)
mutex_lock(&input_dev->mutex);
if (input_dev->users)
- eeti_ts_stop(priv);
+ disable_irq(client->irq);
mutex_unlock(&input_dev->mutex);
if (device_may_wakeup(&client->dev))
- enable_irq_wake(priv->irq);
+ enable_irq_wake(client->irq);
return 0;
}
@@ -287,20 +234,20 @@ static int eeti_ts_resume(struct device *dev)
struct input_dev *input_dev = priv->input;
if (device_may_wakeup(&client->dev))
- disable_irq_wake(priv->irq);
+ disable_irq_wake(client->irq);
mutex_lock(&input_dev->mutex);
if (input_dev->users)
- eeti_ts_start(priv);
+ enable_irq(client->irq);
mutex_unlock(&input_dev->mutex);
return 0;
}
+#endif
static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume);
-#endif
static const struct i2c_device_id eeti_ts_id[] = {
{ "eeti_ts", 0 },
@@ -311,9 +258,8 @@ MODULE_DEVICE_TABLE(i2c, eeti_ts_id);
static struct i2c_driver eeti_ts_driver = {
.driver = {
.name = "eeti_ts",
-#ifdef CONFIG_PM
+ .owner = THIS_MODULE,
.pm = &eeti_ts_pm,
-#endif
},
.probe = eeti_ts_probe,
.remove = __devexit_p(eeti_ts_remove),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
