On Thu, Sep 17, 2026 at 01:19:19PM -0400, Brian Daniels wrote:
> From: Alexandre Courbot <[email protected]>
>
> This patch adds the scatterlist builder, which is used to construct
> scatterlists for virtio commands from V4L2 structures.
>
> It adds drivers/media/virtio/scatterlist_builder.c and
> drivers/media/virtio/scatterlist_builder.h.
>
> Signed-off-by: Alexandre Courbot <[email protected]>
> Assisted-by: Antigravity:gemini-3.5-flash
> Co-developed-by: Brian Daniels <[email protected]>
> Signed-off-by: Brian Daniels <[email protected]>
> ---
> drivers/media/virtio/Makefile | 2 +-
> drivers/media/virtio/scatterlist_builder.c | 515 +++++++++++++++++++++
> drivers/media/virtio/scatterlist_builder.h | 109 +++++
> 3 files changed, 625 insertions(+), 1 deletion(-)
> create mode 100644 drivers/media/virtio/scatterlist_builder.c
> create mode 100644 drivers/media/virtio/scatterlist_builder.h
>
> diff --git a/drivers/media/virtio/Makefile b/drivers/media/virtio/Makefile
> index 09d9834da..8290d8506 100644
> --- a/drivers/media/virtio/Makefile
> +++ b/drivers/media/virtio/Makefile
> @@ -2,6 +2,6 @@
> #
> # Makefile for the virtio-media device driver.
>
> -virtio-media-objs := virtio_media_driver.o
> +virtio-media-objs := scatterlist_builder.o virtio_media_driver.o
>
> obj-$(CONFIG_MEDIA_VIRTIO) += virtio-media.o
> diff --git a/drivers/media/virtio/scatterlist_builder.c
> b/drivers/media/virtio/scatterlist_builder.c
> new file mode 100644
> index 000000000..97925b277
> --- /dev/null
> +++ b/drivers/media/virtio/scatterlist_builder.c
> @@ -0,0 +1,515 @@
> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0+
> +
> +/*
> + * Scatterlist builder helpers for virtio-media.
> + *
> + * Copyright (c) 2024-2026 Google LLC.
> + */
> +
> +#include <linux/moduleparam.h>
> +#include <linux/scatterlist.h>
> +#include <linux/videodev2.h>
> +#include <media/videobuf2-memops.h>
> +
> +#include "uapi/linux/virtio_media.h"
> +#include "scatterlist_builder.h"
> +#include "session.h"
> +
> +/*
> + * If set to %true, then the driver will always copy the data passed to the
> + * host into the shadow buffer (instead of trying to map the source memory
> into
> + * the SG table directly when possible).
> + */
> +static bool always_use_shadow_buffer;
> +module_param(always_use_shadow_buffer, bool, 0660);
> +
> +/* Convert a V4L2 IOCTL into the IOCTL code we can give to the host */
> +#define VIRTIO_MEDIA_IOCTL_CODE(IOCTL) (((IOCTL) >> _IOC_NRSHIFT) &
> _IOC_NRMASK)
> +
> +/**
> + * scatterlist_builder_add_descriptor() - Add a descriptor to the chain.
> + * @builder: builder to use.
> + * @desc_index: index of the descriptor to add.
> + *
> + * Returns %-ENOSPC if @builder->sgs is already full.
> + */
> +int scatterlist_builder_add_descriptor(struct scatterlist_builder *builder,
> + size_t desc_index)
> +{
> + if (builder->cur_sg >= builder->num_sgs)
> + return -ENOSPC;
> + builder->sgs[builder->cur_sg++] = &builder->descs[desc_index];
> +
> + return 0;
> +}
> +
> +/**
> + * scatterlist_builder_add_data() - Append arbitrary data to the descriptor
> + * chain.
> + * @builder: builder to use.
> + * @data: pointer to the data to add to the descriptor chain.
> + * @len: length of the data to add.
> + *
> + * @data will either be directly referenced, or copied into the shadow buffer
> + * to be referenced from there.
> + */
> +int scatterlist_builder_add_data(struct scatterlist_builder *builder,
> + void *data, size_t len)
> +{
> + const size_t cur_desc = builder->cur_desc;
> +
> + if (len == 0)
> + return 0;
> +
> + if (builder->cur_desc >= builder->num_descs)
> + return -ENOSPC;
> +
> + if (!always_use_shadow_buffer && virt_addr_valid(data + len)) {
> + /*
> + * If "data" is in the 1:1 physical memory mapping then we can
> + * use a single SG entry and avoid copying.
> + */
> + struct page *page = virt_to_page(data);
> + size_t offset = (((size_t)data) & ~PAGE_MASK);
> + struct scatterlist *next_desc =
> + &builder->descs[builder->cur_desc];
> +
> + memset(next_desc, 0, sizeof(*next_desc));
> + sg_set_page(next_desc, page, len, offset);
> + builder->cur_desc++;
> + } else if (!always_use_shadow_buffer && is_vmalloc_addr(data)) {
> + int prev_pfn = -2;
> +
> + /*
> + * If "data" has been vmalloc'ed, we need at most one entry per
> + * memory page but can avoid copying.
> + */
> + while (len > 0) {
> + struct page *page = vmalloc_to_page(data);
> + int cur_pfn = page_to_pfn(page);
> + /* All pages but the first will start at offset 0. */
> + unsigned long offset =
> + (((unsigned long)data) & ~PAGE_MASK);
> + size_t len_in_page = min(PAGE_SIZE - offset, len);
> + struct scatterlist *next_desc =
> + &builder->descs[builder->cur_desc];
> +
> + if (builder->cur_desc >= builder->num_descs)
> + return -ENOSPC;
> +
> + /* Optimize contiguous pages */
> + if (cur_pfn == prev_pfn + 1) {
> + (next_desc - 1)->length += len_in_page;
> + } else {
> + memset(next_desc, 0, sizeof(*next_desc));
> + sg_set_page(next_desc, page, len_in_page,
> + offset);
> + builder->cur_desc++;
> + }
> + data += len_in_page;
> + len -= len_in_page;
> + prev_pfn = cur_pfn;
> + }
> + } else {
> + /*
> + * As a last resort, copy into the shadow buffer and reference
> + * it with a single SG entry. Calling
> + * scatterlist_builder_retrieve_data() will be necessary to copy
> + * the data written by the device back into @data.
> + */
> + void *shadow_buffer =
> + builder->shadow_buffer + builder->shadow_buffer_pos;
> + struct page *page = virt_to_page(shadow_buffer);
> + unsigned long offset =
> + (((unsigned long)shadow_buffer) & ~PAGE_MASK);
> + struct scatterlist *next_desc =
> + &builder->descs[builder->cur_desc];
> +
> + if (len >
> + builder->shadow_buffer_size - builder->shadow_buffer_pos)
> + return -ENOSPC;
> +
> + memcpy(shadow_buffer, data, len);
> + memset(next_desc, 0, sizeof(*next_desc));
> + sg_set_page(next_desc, page, len, offset);
> + builder->cur_desc++;
> + builder->shadow_buffer_pos += len;
> + }
> +
> + sg_mark_end(&builder->descs[builder->cur_desc - 1]);
> + return scatterlist_builder_add_descriptor(builder, cur_desc);
> +}
> +
> +/**
> + * scatterlist_builder_retrieve_data() - Retrieve a response written by the
> + * device on the shadow buffer.
> + * @builder: builder to use.
> + * @sg_index: index of the descriptor to read from.
> + * @data: destination for the shadowed data.
> + *
> + * If the shadow buffer is pointed to by the descriptor at index @sg_index of
> + * the chain, then ``sg->length`` bytes are copied back from it into @data.
> + * Otherwise nothing is done since the device has written into @data
> directly.
> + *
> + * @data must have originally been added by scatterlist_builder_add_data() as
> + * the same size as passed to scatterlist_builder_add_data() will be copied
> + * back.
> + */
> +int scatterlist_builder_retrieve_data(struct scatterlist_builder *builder,
> + size_t sg_index, void *data)
> +{
> + void *shadow_buf = builder->shadow_buffer;
> + struct scatterlist *sg;
> + void *kaddr;
> +
> + /* We can only retrieve from the range of sgs currently set. */
> + if (sg_index >= builder->cur_sg)
> + return -ERANGE;
> +
> + sg = builder->sgs[sg_index];
> + kaddr = pfn_to_kaddr(page_to_pfn(sg_page(sg))) + sg->offset;
> +
> + if (kaddr >= shadow_buf &&
> + kaddr < shadow_buf + VIRTIO_SHADOW_BUF_SIZE) {
> + if (kaddr + sg->length >= shadow_buf + VIRTIO_SHADOW_BUF_SIZE)
> + return -EINVAL;
> +
> + memcpy(data, kaddr, sg->length);
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * scatterlist_builder_add_ioctl_cmd() - Add an ioctl command to the
> descriptor
> + * chain.
> + * @builder: builder to use.
> + * @session: session on behalf of which the ioctl command is added.
> + * @ioctl_code: code of the ioctl to add (i.e. ``VIDIOC_*``).
> + */
> +int scatterlist_builder_add_ioctl_cmd(struct scatterlist_builder *builder,
> + struct virtio_media_session *session,
> + u32 ioctl_code)
> +{
> + struct virtio_media_cmd_ioctl *cmd_ioctl = &session->cmd.ioctl;
> +
> + cmd_ioctl->hdr.cmd = VIRTIO_MEDIA_CMD_IOCTL;
> + cmd_ioctl->session_id = session->id;
> + cmd_ioctl->code = VIRTIO_MEDIA_IOCTL_CODE(ioctl_code);
> +
> + return scatterlist_builder_add_data(builder, cmd_ioctl,
> + sizeof(*cmd_ioctl));
> +}
> +
> +/**
> + * scatterlist_builder_add_ioctl_resp() - Add storage to receive an ioctl
> + * response to the descriptor chain.
> + * @builder: builder to use.
> + * @session: session on behalf of which the ioctl response is added.
> + */
> +int scatterlist_builder_add_ioctl_resp(struct scatterlist_builder *builder,
> + struct virtio_media_session *session)
> +{
> + struct virtio_media_resp_ioctl *resp_ioctl = &session->resp.ioctl;
> +
> + return scatterlist_builder_add_data(builder, resp_ioctl,
> + sizeof(*resp_ioctl));
> +}
> +
> +/**
> + * __scatterlist_builder_add_userptr() - Add user pages to @builder.
> + * @builder: builder to use.
> + * @userptr: pointer to userspace memory that we want to add.
> + * @length: length of the data to add.
> + * @sg_list: output parameter. Upon success, points to the area of the shadow
> + * buffer containing the array of SG entries to be added to the
> + * descriptor chain.
> + * @nents: output parameter. Upon success, contains the number of entries
> + * pointed to by @sg_list.
> + *
> + * Data referenced by userspace pointers can be potentially large and very
> + * scattered, which could overwhelm the descriptor chain if added as-is. For
> + * these, we instead build an array of &struct virtio_media_sg_entry in the
> + * shadow buffer and reference it using a single descriptor.
> + *
> + * This function is a helper to perform that. Callers should then add the
> + * descriptor to the chain properly.
> + *
> + * Returns %-EFAULT if @userptr is not a valid user address, which is a case
> the
> + * driver should consider as "normal" operation. All other failures signal a
> + * problem with the driver.
> + */
> +static int
> +__scatterlist_builder_add_userptr(struct scatterlist_builder *builder,
> + unsigned long userptr, unsigned long length,
> + struct virtio_media_sg_entry **sg_list,
> + int *nents)
> +{
> + struct sg_table sg_table = {};
> + struct frame_vector *framevec;
> + struct scatterlist *sg_iter;
> + struct page **pages;
> + const unsigned int offset = userptr & ~PAGE_MASK;
> + unsigned int pages_count;
> + size_t entries_size;
> + int i;
> + int ret;
> +
> + framevec = vb2_create_framevec(userptr, length, true);
> + if (IS_ERR(framevec)) {
> + if (PTR_ERR(framevec) != -EFAULT) {
> + pr_warn("error %ld creating frame vector for userptr
> 0x%lx, length 0x%lx\n",
> + PTR_ERR(framevec), userptr, length);
> + } else {
> + /* -EINVAL is expected in case of invalid userptr. */
> + framevec = ERR_PTR(-EINVAL);
> + }
> + return PTR_ERR(framevec);
> + }
> +
> + pages = frame_vector_pages(framevec);
> + if (IS_ERR(pages)) {
> + pr_warn("error getting vector pages\n");
> + ret = PTR_ERR(pages);
> + goto done;
> + }
> + pages_count = frame_vector_count(framevec);
> + ret = sg_alloc_table_from_pages(&sg_table, pages, pages_count, offset,
> + length, 0);
> + if (ret) {
> + pr_warn("error creating sg table\n");
> + goto done;
> + }
> +
> + /* Allocate our actual SG in the shadow buffer. */
> + *nents = sg_nents(sg_table.sgl);
> + entries_size = sizeof(**sg_list) * *nents;
> + if (builder->shadow_buffer_pos + entries_size >
> + builder->shadow_buffer_size) {
> + ret = -ENOMEM;
> + goto free_sg;
> + }
> +
> + *sg_list = builder->shadow_buffer + builder->shadow_buffer_pos;
> + builder->shadow_buffer_pos += entries_size;
> +
> + for_each_sgtable_sg(&sg_table, sg_iter, i) {
> + struct virtio_media_sg_entry *sg_entry = &(*sg_list)[i];
> +
> + sg_entry->start = sg_phys(sg_iter);
> + sg_entry->len = sg_iter->length;
same issue: reserved not zeroed out.
> + }
> +
> +free_sg:
> + sg_free_table(&sg_table);
> +
> +done:
> + vb2_destroy_framevec(framevec);
> + return ret;
> +}
> +
> +/**
> + * scatterlist_builder_add_userptr() - Add a user-memory buffer using an
> array
> + * of &struct virtio_media_sg_entry.
> + * @builder: builder to use.
> + * @userptr: pointer to userspace memory that we want to add.
> + * @length: length of the data to add.
> + *
> + * Upon success, an array of &struct virtio_media_sg_entry referencing
> + * @userptr has been built into the shadow buffer, and that array added to
> the
> + * descriptor chain.
> + */
> +static int scatterlist_builder_add_userptr(struct scatterlist_builder
> *builder,
> + unsigned long userptr,
> + unsigned long length)
> +{
> + int ret;
> + int nents;
> + struct virtio_media_sg_entry *sg_list;
> +
> + ret = __scatterlist_builder_add_userptr(builder, userptr, length,
> + &sg_list, &nents);
> + if (ret)
> + return ret;
> +
> + ret = scatterlist_builder_add_data(builder, sg_list,
> + sizeof(*sg_list) * nents);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +/**
> + * scatterlist_builder_add_buffer() - Add a &struct v4l2_buffer and its
> planes
> + * to the descriptor chain.
> + * @builder: builder to use.
> + * @b: &struct v4l2_buffer to add.
> + */
> +int scatterlist_builder_add_buffer(struct scatterlist_builder *builder,
> + struct v4l2_buffer *b)
> +{
> + int ret;
> +
> + /* v4l2_buffer */
> + ret = scatterlist_builder_add_data(builder, b, sizeof(*b));
> + if (ret)
> + return ret;
> +
> + if (V4L2_TYPE_IS_MULTIPLANAR(b->type) && b->length > 0) {
> + /* Array of v4l2_planes */
> + ret = scatterlist_builder_add_data(builder, b->m.planes,
> + sizeof(struct v4l2_plane) *
> + b->length);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * scatterlist_builder_retrieve_buffer() - Retrieve a &struct v4l2_buffer
> + * written by the device on the
> shadow
> + * buffer, if needed.
> + * @builder: builder to use.
> + * @sg_index: index of the first SG entry of the buffer in the builder's
> + * descriptor chain.
> + * @b: &struct v4l2_buffer to copy shadow buffer data into.
> + * @orig_planes: the original ``planes`` pointer, to be restored if the
> buffer
> + * is multi-planar.
> + *
> + * If the &struct v4l2_buffer pointed to by @sg_index was copied into the
> + * shadow buffer, then its updated content is copied back into @b.
> + * Otherwise nothing is done as the device has written into @b directly.
> + *
> + * @orig_planes is used to restore the original ``planes`` pointer in case it
> + * gets modified by the host. The specification stipulates that the host
> should
> + * not modify it, but we enforce this for additional safety.
> + */
> +int scatterlist_builder_retrieve_buffer(struct scatterlist_builder *builder,
> + size_t sg_index, struct v4l2_buffer *b,
> + struct v4l2_plane *orig_planes)
> +{
> + int ret;
> +
> + ret = scatterlist_builder_retrieve_data(builder, sg_index++, b);
> + if (ret)
> + return ret;
> +
> + if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
> + b->m.planes = orig_planes;
> +
> + if (orig_planes) {
> + ret = scatterlist_builder_retrieve_data(builder,
> + sg_index++,
> + b->m.planes);
> + if (ret)
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * scatterlist_builder_add_ext_ctrls() - Add a &struct v4l2_ext_controls and
> its
> + * controls to @builder.
> + * @builder: builder to use.
> + * @ctrls: &struct v4l2_ext_controls to add.
> + *
> + * Add @ctrls and its array of &struct v4l2_ext_control to the descriptor
> + * chain.
> + */
> +int scatterlist_builder_add_ext_ctrls(struct scatterlist_builder *builder,
> + struct v4l2_ext_controls *ctrls)
> +{
> + int ret;
> +
> + /* v4l2_ext_controls */
> + ret = scatterlist_builder_add_data(builder, ctrls, sizeof(*ctrls));
> + if (ret)
> + return ret;
> +
> + if (ctrls->count > 0) {
> + /* array of v4l2_controls */
> + ret = scatterlist_builder_add_data(builder, ctrls->controls,
> + sizeof(ctrls->controls[0]) *
> + ctrls->count);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * scatterlist_builder_add_ext_ctrls_userptrs() - Add the userspace payloads
> of
> + * a &struct v4l2_ext_controls
> + * to the descriptor chain.
> + * @builder: builder to use.
> + * @ctrls: &struct v4l2_ext_controls from which we want to add the
> + * userspace payload.
> + *
> + * Add the userspace payloads of @ctrls to the descriptor chain. This is
> split
> + * out of scatterlist_builder_add_ext_ctrls() because we only want to add
> + * these to the device-readable part of the descriptor chain.
> + */
> +int
> +scatterlist_builder_add_ext_ctrls_userptrs(struct scatterlist_builder
> *builder,
> + struct v4l2_ext_controls *ctrls)
> +{
> + int i;
> + int ret;
> +
> + /* Pointers to user memory in individual controls */
> + for (i = 0; i < ctrls->count; i++) {
> + struct v4l2_ext_control *ctrl = &ctrls->controls[i];
> +
> + if (ctrl->size > 0) {
> + unsigned long uptr = (unsigned long)ctrl->ptr;
> +
> + ret = scatterlist_builder_add_userptr(builder, uptr,
> + ctrl->size);
> + if (ret)
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * scatterlist_builder_retrieve_ext_ctrls() - Retrieve controls written by
> the
> + * device on the shadow buffer,
> + * if needed.
> + * @builder: builder to use.
> + * @sg_index: index of the first SG entry of the controls in the builder's
> + * descriptor chain.
> + * @ctrls: &struct v4l2_ext_controls to copy shadow buffer data into.
> + *
> + * If the shadow buffer is pointed to by @sg_index, copy its content back
> into
> + * @ctrls.
> + */
> +int scatterlist_builder_retrieve_ext_ctrls(struct scatterlist_builder
> *builder,
> + size_t sg_index,
> + struct v4l2_ext_controls *ctrls)
> +{
> + struct v4l2_ext_control *controls_backup = ctrls->controls;
> + int ret;
> +
> + ret = scatterlist_builder_retrieve_data(builder, sg_index++, ctrls);
> + if (ret)
> + return ret;
> +
> + ctrls->controls = controls_backup;
> +
> + if (ctrls->count > 0 && ctrls->controls) {
> + ret = scatterlist_builder_retrieve_data(builder, sg_index++,
> + ctrls->controls);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> diff --git a/drivers/media/virtio/scatterlist_builder.h
> b/drivers/media/virtio/scatterlist_builder.h
> new file mode 100644
> index 000000000..47bfd7ae0
> --- /dev/null
> +++ b/drivers/media/virtio/scatterlist_builder.h
> @@ -0,0 +1,109 @@
> +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0+ */
> +
> +/*
> + * Scatterlist builder helpers for virtio-media.
> + *
> + * Copyright (c) 2024-2026 Google LLC.
> + */
> +
> +#ifndef __VIRTIO_MEDIA_SCATTERLIST_BUILDER_H
> +#define __VIRTIO_MEDIA_SCATTERLIST_BUILDER_H
> +
> +#include <linux/scatterlist.h>
> +
> +#include "session.h"
> +
> +/**
> + * struct scatterlist_builder - helper to build a scatterlist from data.
> + * @descs: pool of descriptors to use.
> + * @num_descs: number of entries in descs.
> + * @cur_desc: next descriptor to be used in @descs.
> + * @shadow_buffer: pointer to a shadow buffer where elements that cannot be
> + * mapped directly into the scatterlist get copied.
> + * @shadow_buffer_size: size of @shadow_buffer.
> + * @shadow_buffer_pos: current position in @shadow_buffer.
> + * @sgs: descriptor chain to eventually pass to virtio functions.
> + * @num_sgs: total number of entries in @sgs.
> + * @cur_sg: next entry in @sgs to be used.
> + *
> + * Virtio passes data from the driver to the device (through e.g.
> + * virtqueue_add_sgs()) via a scatterlist that the device interprets as a
> + * linear view over scattered driver memory.
> + *
> + * In virtio-media, the payload of ioctls from user-space can for the most
> part
> + * be passed as-is, or after slight modification, which makes it tempting to
> + * just forward the ioctl payload received from user-space as-is instead of
> + * doing another copy into a dedicated buffer. This structure helps with
> this.
> + *
> + * virtio-media descriptor chains are typically made of the following parts:
> + *
> + * Device-readable:
> + * - A command structure, i.e. ``virtio_media_cmd_*``,
> + * - An ioctl payload (one of the regular ioctl parameters),
> + * - (optionally) arrays of &struct virtio_media_sg_entry describing the
> + * content of buffers in guest memory.
> + *
> + * Device-writable:
> + * - A response structure, i.e. ``virtio_media_resp_*``,
> + * - An ioctl payload, that the device will write to.
> + *
> + * This structure helps laying out the descriptor chain into its @sgs member
> in
> + * an optimal way, by building a scatterlist adapted to the originating
> memory
> + * of the data we want to pass to the device while avoiding copies when
> + * possible.
> + *
> + * It is made of a pool of &struct scatterlist (@descs) that is used to
> + * build the final descriptor chain @sgs, and a @shadow_buffer where data
> that
> + * cannot (or should not) be mapped directly by the host can be temporarily
> + * copied.
> + */
> +struct scatterlist_builder {
> + struct scatterlist *descs;
> + size_t num_descs;
> + size_t cur_desc;
> +
> + void *shadow_buffer;
> + size_t shadow_buffer_size;
> + size_t shadow_buffer_pos;
> +
> + struct scatterlist **sgs;
> + size_t num_sgs;
> + size_t cur_sg;
> +};
> +
> +int scatterlist_builder_add_descriptor(struct scatterlist_builder *builder,
> + size_t desc_index);
> +
> +int scatterlist_builder_add_data(struct scatterlist_builder *builder,
> + void *data, size_t len);
> +
> +int scatterlist_builder_retrieve_data(struct scatterlist_builder *builder,
> + size_t sg_index, void *data);
> +
> +int scatterlist_builder_add_ioctl_cmd(struct scatterlist_builder *builder,
> + struct virtio_media_session *session,
> + u32 ioctl_code);
> +
> +int scatterlist_builder_add_ioctl_resp(struct scatterlist_builder *builder,
> + struct virtio_media_session *session);
> +
> +int scatterlist_builder_add_buffer(struct scatterlist_builder *builder,
> + struct v4l2_buffer *buffer);
> +
> +int scatterlist_builder_retrieve_buffer(struct scatterlist_builder *builder,
> + size_t sg_index,
> + struct v4l2_buffer *buffer,
> + struct v4l2_plane *orig_planes);
> +
> +int scatterlist_builder_add_ext_ctrls(struct scatterlist_builder *builder,
> + struct v4l2_ext_controls *ctrls);
> +
> +int
> +scatterlist_builder_add_ext_ctrls_userptrs(struct scatterlist_builder
> *builder,
> + struct v4l2_ext_controls *ctrls);
> +
> +int scatterlist_builder_retrieve_ext_ctrls(struct scatterlist_builder
> *builder,
> + size_t sg_index,
> + struct v4l2_ext_controls *ctrls);
> +
> +#endif // __VIRTIO_MEDIA_SCATTERLIST_BUILDER_H
> --
> 2.55.0.1082.g2b9226bbc0-goog
