Add the missing smps3-6 and ldo17 definitions. While smps3/5 and ldo17 are not used from the rpmh regulator driver on SM6350, the regulators do exist, so add them with the types based on the datasheet.
Signed-off-by: Luca Weiss <[email protected]> --- drivers/regulator/qcom-rpmh-regulator.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index dd2265961151..7d20f3e47760 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -1591,7 +1591,10 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = { static const struct rpmh_vreg_init_data pm6350_vreg_data[] = { RPMH_VREG("smps1", SMPS, 1, &pmic5_ftsmps510, "vdd-s1"), RPMH_VREG("smps2", SMPS, 2, &pmic5_hfsmps510, "vdd-s2"), - /* smps3 - smps5 not configured */ + RPMH_VREG("smps3", SMPS, 3, &pmic5_ftsmps510, "vdd-s3"), + RPMH_VREG("smps4", SMPS, 4, &pmic5_ftsmps510, "vdd-s4"), + RPMH_VREG("smps5", SMPS, 5, &pmic5_ftsmps510, "vdd-s5"), + RPMH_VREG("smps6", SMPS, 6, &pmic5_hfsmps510, "vdd-s6"), RPMH_VREG("ldo1", LDO, 1, &pmic5_nldo, "vdd-l1"), RPMH_VREG("ldo2", LDO, 2, &pmic5_pldo, "vdd-l2-l5-l7"), RPMH_VREG("ldo3", LDO, 3, &pmic5_pldo, "vdd-l3-l6-l8-l9-l10"), @@ -1608,7 +1611,7 @@ static const struct rpmh_vreg_init_data pm6350_vreg_data[] = { RPMH_VREG("ldo14", LDO, 14, &pmic5_pldo, "vdd-l12-l14"), RPMH_VREG("ldo15", LDO, 15, &pmic5_nldo, "vdd-l15-l19-l22"), RPMH_VREG("ldo16", LDO, 16, &pmic5_nldo, "vdd-l16"), - /* ldo17 not configured */ + RPMH_VREG("ldo17", LDO, 17, &pmic5_nldo, "vdd-l17"), RPMH_VREG("ldo18", LDO, 18, &pmic5_nldo, "vdd-l18-l20-l21"), RPMH_VREG("ldo19", LDO, 19, &pmic5_nldo, "vdd-l15-l19-l22"), RPMH_VREG("ldo20", LDO, 20, &pmic5_nldo, "vdd-l18-l20-l21"), -- 2.55.0
