From: Hangbin Liu <[email protected]> When reviewing the test code, I saw many tests using the same or similar log_test functions. We can move them to lib.sh to save effort. However, due to historical reasons, we moved the log_test from the forwarding lib first, which has different usage. So, rename the log_test in the net folder to log_test_expected. Since renaming all the log_test functions in the test cases would change too many lines, I just use a wrapper in the old code.
The fourth argument in icmp_redirect.sh is not needed, as the xfail issue has already been fixed and it should always pass. But I still keep the xfail logic in the log_test in lib.sh in case other tests need it. Signed-off-by: Hangbin Liu <[email protected]> --- tools/testing/selftests/net/drop_monitor_tests.sh | 13 +------- tools/testing/selftests/net/fcnal-test.sh | 29 +--------------- tools/testing/selftests/net/fdb_flush.sh | 35 +------------------ tools/testing/selftests/net/fib-onlink-tests.sh | 18 +--------- .../selftests/net/fib_nexthop_multiprefix.sh | 21 +----------- tools/testing/selftests/net/fib_nexthop_nongw.sh | 21 +----------- tools/testing/selftests/net/fib_nexthops.sh | 39 +--------------------- tools/testing/selftests/net/fib_rule_tests.sh | 19 +---------- tools/testing/selftests/net/fib_tests.sh | 26 +-------------- tools/testing/selftests/net/gre_gso.sh | 26 +-------------- tools/testing/selftests/net/icmp_redirect.sh | 27 ++------------- tools/testing/selftests/net/l2tp.sh | 19 +---------- tools/testing/selftests/net/lib.sh | 38 +++++++++++++++++++++ .../selftests/net/ndisc_unsolicited_na_test.sh | 26 +-------------- .../selftests/net/srv6_encap_lookup_l3vpn_test.sh | 19 +---------- .../selftests/net/srv6_end_dt46_l3vpn_test.sh | 19 +---------- .../selftests/net/srv6_end_dt4_l3vpn_test.sh | 19 +---------- .../selftests/net/srv6_end_dt6_l3vpn_test.sh | 19 +---------- .../selftests/net/srv6_end_dx4_netfilter_test.sh | 23 ++----------- .../selftests/net/srv6_end_dx6_netfilter_test.sh | 23 ++----------- .../testing/selftests/net/srv6_end_flavors_test.sh | 23 ++----------- .../selftests/net/srv6_end_next_csid_l3vpn_test.sh | 19 +---------- .../net/srv6_end_x_next_csid_l3vpn_test.sh | 19 +---------- .../selftests/net/srv6_hencap_red_l3vpn_test.sh | 19 +---------- .../selftests/net/srv6_hl2encap_red_l2vpn_test.sh | 19 +---------- .../selftests/net/test_bridge_backup_port.sh | 32 +----------------- .../selftests/net/test_bridge_neigh_suppress.sh | 34 +------------------ tools/testing/selftests/net/test_vxlan_mdb.sh | 32 +----------------- .../selftests/net/test_vxlan_nolocalbypass.sh | 32 +----------------- .../selftests/net/test_vxlan_vnifiltering.sh | 26 +-------------- tools/testing/selftests/net/vrf-xfrm-tests.sh | 19 +---------- tools/testing/selftests/net/vrf_route_leaking.sh | 19 +---------- .../testing/selftests/net/vrf_strict_mode_test.sh | 19 +---------- 33 files changed, 78 insertions(+), 713 deletions(-) diff --git a/tools/testing/selftests/net/drop_monitor_tests.sh b/tools/testing/selftests/net/drop_monitor_tests.sh index 507d0a82f5f0..7da85608561b 100755 --- a/tools/testing/selftests/net/drop_monitor_tests.sh +++ b/tools/testing/selftests/net/drop_monitor_tests.sh @@ -18,18 +18,7 @@ DEVLINK_DEV=netdevsim/${DEV} log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf " TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf " TEST: %-60s [FAIL]\n" "${msg}" - fi + log_test_expected "$1" "$2" "$3" } setup() diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 890c3f8e51bb..a50609535fed 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -97,34 +97,7 @@ fi log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - local ans - - [ "${VERBOSE}" = "1" ] && echo - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf "TEST: %-70s [ OK ]\n" "${msg}" - else - nfail=$((nfail+1)) - printf "TEST: %-70s [FAIL]\n" "${msg}" - echo " expected rc $expected; actual rc $rc" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read ans - [ "$ans" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read ans - [ "$ans" = "q" ] && exit 1 - fi + log_test_expected "$1" "$2" "$3" kill_procs } diff --git a/tools/testing/selftests/net/fdb_flush.sh b/tools/testing/selftests/net/fdb_flush.sh index 9931a1e36e3d..4965e52d5ef5 100755 --- a/tools/testing/selftests/net/fdb_flush.sh +++ b/tools/testing/selftests/net/fdb_flush.sh @@ -67,40 +67,7 @@ run_cmd() log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - local nsuccess - local nfail - local ret - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "$VERBOSE" = "1" ]; then - echo " rc=$rc, expected $expected" - fi - - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - - [ "$VERBOSE" = "1" ] && echo + log_test_expected "$1" "$2" "$3" } MAC_POOL_1=" diff --git a/tools/testing/selftests/net/fib-onlink-tests.sh b/tools/testing/selftests/net/fib-onlink-tests.sh index e0d45292a298..a26075abf7d2 100755 --- a/tools/testing/selftests/net/fib-onlink-tests.sh +++ b/tools/testing/selftests/net/fib-onlink-tests.sh @@ -85,23 +85,7 @@ PBR_TABLE=101 log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf " TEST: %-50s [ OK ]\n" "${msg}" - else - nfail=$((nfail+1)) - printf " TEST: %-50s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } log_section() diff --git a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh index e85248609af4..bd0b8a053ea1 100755 --- a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh +++ b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh @@ -23,26 +23,7 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - [ "$VERBOSE" = "1" ] && echo + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/fib_nexthop_nongw.sh b/tools/testing/selftests/net/fib_nexthop_nongw.sh index 1ccf56f10171..4d483cb83593 100755 --- a/tools/testing/selftests/net/fib_nexthop_nongw.sh +++ b/tools/testing/selftests/net/fib_nexthop_nongw.sh @@ -18,26 +18,7 @@ ret=0 log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - [ "$VERBOSE" = "1" ] && echo + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/fib_nexthops.sh b/tools/testing/selftests/net/fib_nexthops.sh index 3d347126730a..16fe92775ae0 100755 --- a/tools/testing/selftests/net/fib_nexthops.sh +++ b/tools/testing/selftests/net/fib_nexthops.sh @@ -70,44 +70,7 @@ nsid=100 log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - if [[ $rc -eq $ksft_skip ]]; then - [[ $ret -eq 0 ]] && ret=$ksft_skip - nskip=$((nskip+1)) - printf "TEST: %-60s [SKIP]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - fi - - if [ "$VERBOSE" = "1" ]; then - echo " rc=$rc, expected $expected" - fi - - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - - [ "$VERBOSE" = "1" ] && echo + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index 5fbdd2a0b537..5d66b00e61b2 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -31,24 +31,7 @@ SELFTEST_PATH="" log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf " TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf " TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } setup() diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index b338bfb196a2..7df967a2d669 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -24,31 +24,7 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf " TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf " TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi + log_test_expected "$1" "$2" "$3" } setup() diff --git a/tools/testing/selftests/net/gre_gso.sh b/tools/testing/selftests/net/gre_gso.sh index 5100d90f92d2..4ebe1ed6e9c9 100755 --- a/tools/testing/selftests/net/gre_gso.sh +++ b/tools/testing/selftests/net/gre_gso.sh @@ -16,31 +16,7 @@ PID= log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf " TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf " TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi + log_test_expected "$1" "$2" "$3" } setup() diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh index b13c89a99ecb..0107af73aef4 100755 --- a/tools/testing/selftests/net/icmp_redirect.sh +++ b/tools/testing/selftests/net/icmp_redirect.sh @@ -61,28 +61,7 @@ log_section() log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - local xfail=$4 - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - elif [ ${rc} -eq ${xfail} ]; then - printf "TEST: %-60s [XFAIL]\n" "${msg}" - nxfail=$((nxfail+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } log_debug() @@ -303,7 +282,7 @@ check_exception() ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \ grep -E -v 'mtu|redirected' | grep -q "cache" fi - log_test $? 0 "IPv4: ${desc}" 0 + log_test $? 0 "IPv4: ${desc}" # No PMTU info for test "redirect" and "mtu exception plus redirect" if [ "$with_redirect" = "yes" ] && [ "$desc" != "redirect exception plus mtu" ]; then @@ -319,7 +298,7 @@ check_exception() ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \ grep -v "mtu" | grep -q "${R1_LLADDR}" fi - log_test $? 0 "IPv6: ${desc}" 1 + log_test $? 0 "IPv6: ${desc}" } run_ping() diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh index 88de7166c8ae..41e8b19d1bd3 100755 --- a/tools/testing/selftests/net/l2tp.sh +++ b/tools/testing/selftests/net/l2tp.sh @@ -23,24 +23,7 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) # log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index d46d2cec89e4..e02a6a91ff91 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -454,6 +454,44 @@ log_test_xfail() RET=$ksft_xfail retmsg= log_test "$@" } +# Log test result with expected return value +log_test_expected() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ "${rc}" -eq "${expected}" ]; then + nsuccess=$((nsuccess+1)) + printf "TEST: %-60s [ OK ]\n" "${msg}" + elif [ "${rc}" -eq "${ksft_skip}" ]; then + [[ "$ret" -eq 0 ]] && ret="$ksft_skip" + nskip=$((nskip+1)) + printf "TEST: %-60s [SKIP]\n" "${msg}" + elif [ "${rc}" -eq "${ksft_xfail}" ]; then + nxfail=$((nxfail+1)) + printf "TEST: %-60s [XFAIL]\n" "${msg}" + else + ret=$(ksft_exit_status_merge "$ret" "$ksft_fail") + nfail=$((nfail+1)) + printf "TEST: %-60s [FAIL]\n" "${msg}" + if [ "$VERBOSE" = "1" ]; then + echo " rc=$rc, expected $expected" + fi + + pause_on_fail + fi + + if [ "${PAUSE}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read -r a + [ "$a" = "q" ] && exit 1 + fi + + [ "$VERBOSE" = "1" ] && echo +} + log_info() { local msg=$1 diff --git a/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh b/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh index 5db69dad0cfc..89072d30fc59 100755 --- a/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh +++ b/tools/testing/selftests/net/ndisc_unsolicited_na_test.sh @@ -30,31 +30,7 @@ tcpdump_stderr= log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf " TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf " TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi + log_test_expected "$1" "$2" "$3" } setup() diff --git a/tools/testing/selftests/net/srv6_encap_lookup_l3vpn_test.sh b/tools/testing/selftests/net/srv6_encap_lookup_l3vpn_test.sh index d6249303b7ea..8241de6827de 100755 --- a/tools/testing/selftests/net/srv6_encap_lookup_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_encap_lookup_l3vpn_test.sh @@ -202,24 +202,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} log_test() { - local rc="$1" - local expected="$2" - local msg="$3" - - if [ "${rc}" -eq "${expected}" ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read -r a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh index 50e37d3217ea..900a2ae42335 100755 --- a/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh @@ -208,24 +208,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh index a649dba3cb77..50c636e84255 100755 --- a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh @@ -177,24 +177,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh index e408406d8489..1f785a7704be 100755 --- a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh @@ -178,24 +178,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh index e23210aa547f..aeddbef536d6 100755 --- a/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh +++ b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh @@ -111,8 +111,8 @@ # +---------------------------------------------------+ # -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 +# shellcheck source=lib.sh +source lib.sh readonly IPv6_RT_NETWORK=2001:11 readonly IPv4_HS_NETWORK=10.0.0 @@ -126,24 +126,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh index 9e69a2ed5bc3..8fbeda1372e1 100755 --- a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh +++ b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh @@ -111,8 +111,8 @@ # +---------------------------------------------------+ # -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 +# shellcheck source=lib.sh +source lib.sh readonly IPv6_RT_NETWORK=2001:11 readonly IPv6_HS_NETWORK=cafe @@ -126,24 +126,7 @@ PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_flavors_test.sh b/tools/testing/selftests/net/srv6_end_flavors_test.sh index 318487eda671..30a939392eea 100755 --- a/tools/testing/selftests/net/srv6_end_flavors_test.sh +++ b/tools/testing/selftests/net/srv6_end_flavors_test.sh @@ -194,8 +194,8 @@ # after the IPv6 header. At this point, the packet with IPv6 DA=cafe::1 is sent # to the destination, i.e. hs-1. -# Kselftest framework requirement - SKIP code is 4. -readonly ksft_skip=4 +# shellcheck source=lib.sh +source lib.sh readonly RDMSUFF="$(mktemp -u XXXXXXXX)" readonly DUMMY_DEVNAME="dum0" @@ -224,24 +224,7 @@ nfail=0 log_test() { - local rc="$1" - local expected="$2" - local msg="$3" - - if [ "${rc}" -eq "${expected}" ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh index 4bc135e5c22c..2e2ae21974ae 100755 --- a/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh @@ -323,24 +323,7 @@ nfail=0 log_test() { - local rc="$1" - local expected="$2" - local msg="$3" - - if [ "${rc}" -eq "${expected}" ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh index 34b781a2ae74..b492a7f0297f 100755 --- a/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh @@ -368,24 +368,7 @@ nfail=0 log_test() { - local rc="$1" - local expected="$2" - local msg="$3" - - if [ "${rc}" -eq "${expected}" ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh b/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh index cd7d061e21f8..64ea4e2308b6 100755 --- a/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh +++ b/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh @@ -197,24 +197,7 @@ HAS_TUNSRC=false log_test() { - local rc="$1" - local expected="$2" - local msg="$3" - - if [ "${rc}" -eq "${expected}" ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh b/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh index 0979b5316fdf..31e41cc4922e 100755 --- a/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh +++ b/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh @@ -146,24 +146,7 @@ nfail=0 log_test() { - local rc="$1" - local expected="$2" - local msg="$3" - - if [ "${rc}" -eq "${expected}" ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() diff --git a/tools/testing/selftests/net/test_bridge_backup_port.sh b/tools/testing/selftests/net/test_bridge_backup_port.sh index 2a7224fe74f2..8bc76be2b2d3 100755 --- a/tools/testing/selftests/net/test_bridge_backup_port.sh +++ b/tools/testing/selftests/net/test_bridge_backup_port.sh @@ -56,37 +56,7 @@ PING_TIMEOUT=5 log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "$VERBOSE" = "1" ]; then - echo " rc=$rc, expected $expected" - fi - - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - - [ "$VERBOSE" = "1" ] && echo + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh index e9ed0d750996..9d2dc0faf741 100755 --- a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh +++ b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh @@ -72,39 +72,7 @@ PAUSE=no log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - # shellcheck disable=SC2154 - ret=$(ksft_exit_status_merge "$ret" "$ksft_fail") - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "$VERBOSE" = "1" ]; then - echo " rc=$rc, expected $expected" - fi - - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - - [ "$VERBOSE" = "1" ] && echo - return 0 + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh index 58da5de99ac4..cffbd9343d56 100755 --- a/tools/testing/selftests/net/test_vxlan_mdb.sh +++ b/tools/testing/selftests/net/test_vxlan_mdb.sh @@ -133,37 +133,7 @@ PAUSE=no log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "$VERBOSE" = "1" ]; then - echo " rc=$rc, expected $expected" - fi - - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - - [ "$VERBOSE" = "1" ] && echo + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh index b8805983b728..c51ca0b532dd 100755 --- a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh +++ b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh @@ -24,37 +24,7 @@ PAUSE=no log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "$VERBOSE" = "1" ]; then - echo " rc=$rc, expected $expected" - fi - - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - - [ "$VERBOSE" = "1" ] && echo + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/test_vxlan_vnifiltering.sh b/tools/testing/selftests/net/test_vxlan_vnifiltering.sh index 8deacc565afa..6fb5af013dac 100755 --- a/tools/testing/selftests/net/test_vxlan_vnifiltering.sh +++ b/tools/testing/selftests/net/test_vxlan_vnifiltering.sh @@ -98,31 +98,7 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf " TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf " TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi - - if [ "${PAUSE}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/vrf-xfrm-tests.sh b/tools/testing/selftests/net/vrf-xfrm-tests.sh index b64dd891699d..a4617e5dace7 100755 --- a/tools/testing/selftests/net/vrf-xfrm-tests.sh +++ b/tools/testing/selftests/net/vrf-xfrm-tests.sh @@ -35,24 +35,7 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) # log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } run_cmd_host1() diff --git a/tools/testing/selftests/net/vrf_route_leaking.sh b/tools/testing/selftests/net/vrf_route_leaking.sh index ce34cb2e6e0b..abf106e0f0c0 100755 --- a/tools/testing/selftests/net/vrf_route_leaking.sh +++ b/tools/testing/selftests/net/vrf_route_leaking.sh @@ -99,24 +99,7 @@ log_section() log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ "${rc}" -eq "${expected}" ]; then - printf "TEST: %-60s [ OK ]\n" "${msg}" - nsuccess=$((nsuccess+1)) - else - ret=1 - nfail=$((nfail+1)) - printf "TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read -r a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } run_cmd() diff --git a/tools/testing/selftests/net/vrf_strict_mode_test.sh b/tools/testing/selftests/net/vrf_strict_mode_test.sh index 01552b542544..7de1873362ba 100755 --- a/tools/testing/selftests/net/vrf_strict_mode_test.sh +++ b/tools/testing/selftests/net/vrf_strict_mode_test.sh @@ -16,24 +16,7 @@ TESTS="init testns mix" log_test() { - local rc=$1 - local expected=$2 - local msg="$3" - - if [ ${rc} -eq ${expected} ]; then - nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" - else - ret=1 - nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo - echo "hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - fi + log_test_expected "$1" "$2" "$3" } print_log_test_results() --- base-commit: ac155a26750a595703e7dadff84735456d75a479 change-id: 20260812-self_log_test-b76eaf73e23f Best regards, -- Hangbin Liu <[email protected]>
