From: David Heidelberg <[email protected]> Enable the PMI8998 flash LED block and describe two white flash LEDs used for the rear camera.
Configure the LED in flash mode with hardware limits matching the original device configuration, including maximum current and timeout. In contrary to downstream, we can control both LEDs separately. Signed-off-by: David Heidelberg <[email protected]> --- arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi index cb5c261802bc9..f3c7333a4076e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi @@ -1,16 +1,17 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include <dt-bindings/arm/qcom,ids.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" /delete-node/ &mpss_region; @@ -589,16 +590,42 @@ &pm8998_resin { }; &pmi8998_charger { monitored-battery = <&battery>; status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + /* upper part */ + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + /* bottom part */ + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; -- 2.53.0
