Hello LKML. Under semi-high disk I/O (e.g. installing a compiled KDE), I get the following (accompanied by seconds of lock-ups on the machine):
[ 7727.345183] arcmsr0: abort device command of scsi id = 0 lun = 0 [ 7730.348776] arcmsr0: scsi id = 0 lun = 0 ccb = '0xdfb461c0' poll command abort successfully [ 8053.795943] arcmsr0: abort device command of scsi id = 0 lun = 0 [ 8056.799528] arcmsr0: scsi id = 0 lun = 0 ccb = '0xdfb595e0' poll command abort successfully [ 8884.592810] arcmsr0: abort device command of scsi id = 0 lun = 0 [ 8887.596392] arcmsr0: scsi id = 0 lun = 0 ccb = '0xdfb56d80' poll command abort successfully [ 8917.760216] arcmsr0: abort device command of scsi id = 0 lun = 0 [ 8920.763797] arcmsr0: scsi id = 0 lun = 0 ccb = '0xdfb472c0' poll command abort successfully [ 9074.106547] arcmsr0: abort device command of scsi id = 0 lun = 0 This is my setup: 1 x MSI K8N Master2-FAR 1 x Opteron 252 1 x Areca ARC1200 (sitting in a PCIe x4 socket) 2 x WD1500ADFD in RAID1 [EMAIL PROTECTED]:~$ uname -a Linux rubik 2.6.24-7-generic #1 SMP Thu Feb 7 01:29:58 UTC 2008 i686 GNU/Linux [EMAIL PROTECTED]:~$ modinfo arcmsr filename: /lib/modules/2.6.24-7-generic/kernel/drivers/scsi/arcmsr/arcmsr.ko version: Driver Version 1.20.00.15 2007/08/30 license: Dual BSD/GPL description: ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID HOST Adapter author: Erich Chen <[EMAIL PROTECTED]> srcversion: 28EAD6AB49D4491CA04D465 [...] I've read some previous posts here on LKML that it could be the Areca firmware who doesn't like my WD disks. Anyone know if this is an IRQ handling problem in the kernel, or if it's a problem with the RAID controller firmware? Erich Chen (of Areca); have you tried the new ARC1200 in RAID1 configuration with Raptor disks on Linux? As a side note, I can tell you that I first tried running FreeBSD 6.3 (RELENG_6) on this machine, but got random reboots during disk I/O (even with a kernel with KDB debugging turned on). This leads me to believe that it might be a firmware issue, and that Linux just handles it more gracefully than FreeBSD. Any ideas or advice is appriciated. This is my first post to the LKML, so please instruct me if you want more information or if you want me to take further debugging actions. Best regards, Aron Stansvik -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
