On Wed, Apr 29, 2026 at 12:29:26PM +0530, Mukesh Ojha wrote: > On Mon, Apr 27, 2026 at 03:25:48PM +0530, Sumit Garg wrote: > > From: Sumit Garg <[email protected]> > > > > Qcom platforms has the legacy of using non-standard SCM calls > > splintered over the various kernel drivers. These SCM calls aren't > > compliant with the standard SMC calling conventions which is a > > prerequisite to enable migration to the FF-A specifications from Arm. > > > > OP-TEE as an alternative trusted OS to Qualcomm TEE (QTEE) can't > > support these non-standard SCM calls. And even for newer architectures > > using S-EL2 with Hafnium support, QTEE won't be able to support SCM > > calls either with FF-A requirements coming in. And with both OP-TEE > > and QTEE drivers well integrated in the TEE subsystem, it makes further > > sense to reuse the TEE bus client drivers infrastructure. > > > > The added benefit of TEE bus infrastructure is that there is support > > for discoverable/enumerable services. With that client drivers don't > > have to manually invoke a special SCM call to know the service status. > > > > So enable the generic Peripheral Authentication Service (PAS) provided > > by the firmware. It acts as the common layer with different TZ > > backends plugged in whether it's an SCM implementation or a proper > > TEE bus based PAS service implementation. > > > > The TEE PAS service ABI is designed to be extensible with additional API > > as PTA_QCOM_PAS_CAPABILITIES. This allows to accommodate any future > > extensions of the PAS service needed while still maintaining backwards > > compatibility. > > > > Currently OP-TEE support is being added to provide the backend PAS > > service implementation which can be found as part of this PR [1]. > > This implementation has been tested on Kodiak/RB3Gen2 board with lemans > > EVK board being the next target. In addition to that WIN/IPQ targets > > planning to use OP-TEE will use this service too. Surely the backwards > > compatibility is maintained and tested for SCM backend. > > > > Note that kernel PAS service support while running in EL2 is at parity > > among OP-TEE vs QTEE. Especially the media (venus/iris) support depends > > on proper IOMMU support being worked out on the PAS client end. > > > > Patch summary: > > - Patch #1: adds Kodiak EL2 overlay since boot stack with TF-A/OP-TEE > > only allow UEFI and Linux to boot in EL2. > > - Patch #2: adds generic PAS service. > > - Patch #3: migrates SCM backend to generic PAS service. > > - Patch #4: adds TEE/OP-TEE backend for generic PAS service. > > - Patch #5-#13: migrates all client drivers to generic PAS service. > > - Patch #14: drops legacy PAS SCM exported APIs. > > > Gave it a try to test the series on Lemans with Gunyah as well as KVM > hypervisor and all the remote processor are coming up successfully. > > Feel free to carry > > Tested-by: Mukesh Ojha <[email protected]> # Lemans > > for the Series. >
Thanks for taking time to test this patch-set. -Sumit > > > The patch-set is based on v7.1-rc1 tag and can be found in git tree here > > [2]. > > > > Merge strategy: > > > > It is expected due to APIs dependency, the entire patch-set to go via > > the Qcom tree. All other subsystem maintainers, it will be great if I > > can get acks for the corresponding subsystem patches. > > > > [1] https://github.com/OP-TEE/optee_os/pull/7721 > > [2] > > https://git.kernel.org/pub/scm/linux/kernel/git/sumit.garg/linux.git/log/?h=qcom-pas-v4 > > > > --- > > Changes in v4: > > - Incorporate misc. comments on patch #4. > > - Picked up an ack for patch #10. > > - Clarify in cover letter about state of media support. > > > > Changes in v3: > > - Incorporated some style and misc. comments for patch #2, #3 and #4. > > - Add QCOM_PAS Kconfig dependency for various subsystems. > > - Switch from pseudo TA to proper TA invoke commands. > > > > Changes in v2: > > - Fixed kernel doc warnings. > > - Polish commit message and comments for patch #2. > > - Pass proper PAS ID in set_remote_state API for media firmware drivers. > > - Added Maintainer entry and dropped MODULE_AUTHOR. > > > > Mukesh Ojha (1): > > arm64: dts: qcom: kodiak: Add EL2 overlay > > > > Sumit Garg (14): > > firmware: qcom: Add a generic PAS service > > firmware: qcom_scm: Migrate to generic PAS service > > firmware: qcom: Add a PAS TEE service > > remoteproc: qcom_q6v5_pas: Switch over to generic PAS TZ APIs > > remoteproc: qcom_q6v5_mss: Switch to generic PAS TZ APIs > > soc: qcom: mdtloader: Switch to generic PAS TZ APIs > > remoteproc: qcom_wcnss: Switch to generic PAS TZ APIs > > remoteproc: qcom: Select QCOM_PAS generic service > > drm/msm: Switch to generic PAS TZ APIs > > media: qcom: Switch to generic PAS TZ APIs > > net: ipa: Switch to generic PAS TZ APIs > > wifi: ath12k: Switch to generic PAS TZ APIs > > firmware: qcom_scm: Remove SCM PAS wrappers > > MAINTAINERS: Add maintainer entry for Qualcomm PAS TZ service > > > > MAINTAINERS | 9 + > > arch/arm64/boot/dts/qcom/Makefile | 2 + > > arch/arm64/boot/dts/qcom/kodiak-el2.dtso | 35 ++ > > drivers/firmware/qcom/Kconfig | 19 + > > drivers/firmware/qcom/Makefile | 2 + > > drivers/firmware/qcom/qcom_pas.c | 288 +++++++++++ > > drivers/firmware/qcom/qcom_pas.h | 50 ++ > > drivers/firmware/qcom/qcom_pas_tee.c | 479 ++++++++++++++++++ > > drivers/firmware/qcom/qcom_scm.c | 302 ++++------- > > drivers/gpu/drm/msm/Kconfig | 1 + > > drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 4 +- > > drivers/gpu/drm/msm/adreno/adreno_gpu.c | 11 +- > > drivers/media/platform/qcom/iris/Kconfig | 25 +- > > .../media/platform/qcom/iris/iris_firmware.c | 9 +- > > drivers/media/platform/qcom/venus/Kconfig | 1 + > > drivers/media/platform/qcom/venus/firmware.c | 11 +- > > drivers/net/ipa/Kconfig | 2 +- > > drivers/net/ipa/ipa_main.c | 13 +- > > drivers/net/wireless/ath/ath12k/Kconfig | 2 +- > > drivers/net/wireless/ath/ath12k/ahb.c | 8 +- > > drivers/remoteproc/Kconfig | 1 + > > drivers/remoteproc/qcom_q6v5_mss.c | 5 +- > > drivers/remoteproc/qcom_q6v5_pas.c | 51 +- > > drivers/remoteproc/qcom_wcnss.c | 12 +- > > drivers/soc/qcom/mdt_loader.c | 12 +- > > include/linux/firmware/qcom/qcom_pas.h | 43 ++ > > include/linux/firmware/qcom/qcom_scm.h | 29 -- > > include/linux/soc/qcom/mdt_loader.h | 6 +- > > 28 files changed, 1115 insertions(+), 317 deletions(-) > > create mode 100644 arch/arm64/boot/dts/qcom/kodiak-el2.dtso > > create mode 100644 drivers/firmware/qcom/qcom_pas.c > > create mode 100644 drivers/firmware/qcom/qcom_pas.h > > create mode 100644 drivers/firmware/qcom/qcom_pas_tee.c > > create mode 100644 include/linux/firmware/qcom/qcom_pas.h > > > > -- > > 2.51.0 > > > > -- > -Mukesh Ojha >
