On 3/25/2026 10:57 AM, David Heidelberg via B4 Relay wrote: > From: Amit Pundir <[email protected]> > > Some firmware versions do not support the host-capability QMI request. > Since this request occurs before firmware and board files are loaded, > the quirk cannot be expressed in the firmware itself and must be described > in the device tree. > > Signed-off-by: Amit Pundir <[email protected]> > Signed-off-by: David Heidelberg <[email protected]> > --- > Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml > b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml > index f2440d39b7ebc..5120b3589ab57 100644 > --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml > +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml > @@ -171,6 +171,12 @@ properties: > Quirk specifying that the firmware expects the 8bit version > of the host capability QMI request > > + qcom,snoc-host-cap-skip-quirk: > + type: boolean > + description: > + Quirk specifying that the firmware wants to skip the host > + capability QMI request > + > qcom,xo-cal-data: > $ref: /schemas/types.yaml#/definitions/uint32 > description: >
DT folks, there is a pending DTS series [1] that would like to reference this capability. Would like to get an ack so I can get this in the upcoming merge window. Thanks, /jeff [1] https://lore.kernel.org/all/[email protected]/
