[PATCH v6 07/15] arm64: dts: qcom: sdm845-lg-judyln: Add lab/ibb

[Paul Sajna]

These regulators are required for the LCD

Signed-off-by: Paul Sajna <sajatt...@postmarketos.org>
---
 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts 
b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index 55bfddab3afd..bbfa709048f7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -67,6 +67,23 @@ &gpu_zap_shader {
        firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
 };
 
+&ibb {
+       regulator-min-microvolt = <5500000>;
+       regulator-max-microvolt = <5500000>;
+       regulator-over-current-protection;
+       regulator-pull-down;
+       regulator-soft-start;
+       qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+       regulator-min-microvolt = <5500000>;
+       regulator-max-microvolt = <5500000>;
+       regulator-over-current-protection;
+       regulator-pull-down;
+       regulator-soft-start;
+};
+
 &mss_pil {
        firmware-name = "qcom/sdm845/judyln/mba.mbn", 
"qcom/sdm845/judyln/modem.mbn";
 };

-- 
2.53.0