On 1/19/26 12:58 PM, Petr Hodina via B4 Relay wrote: > From: Petr Hodina <[email protected]> > > Enable the bluetooth interface on the uart6 > > Signed-off-by: Petr Hodina <[email protected]> > --- > arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi > b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi > index 68841e036c20..f23f9757a08b 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi > @@ -755,6 +755,23 @@ int-pins { > > &uart6 { > status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn3990-bt"; > + > + /* > + * This path is relative to the qca/ > + * subdir under lib/firmware. > + */ > + firmware-name = "akatsuki/crnv21.bin";
'akatsuki' is the codename of the Xperia XZ3 specifically, whereas you declare this in the common file. If they all should/can use the same binary, let's rename the path and if they have to be separate, let's declare that You can probably grab the firmware images for all three (four actually but I don't know if anyone has the XZ2P) devices, dump it from the bluetooth/vendor/firmware partition (can't recall where specifically) and diff the files Konrad
