On Mon, Jun 09, 2025 at 12:34:21PM GMT, Frank Li wrote:
> Support only one physical function, so call imx_pcie_add_lut_by_rid(0)
> to add a single LUT entry when operating in EP mode.
>
So previously LUT config was not present and endpoint mode continued to work?
Please explain why this is necessary now.
- Mani
> Signed-off-by: Frank Li <frank...@nxp.com>
> ---
> change from v14 to v16
> - none
>
> change from v13 to v14
> - new patch
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 032b906c44dfa..3123bf49e209c 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1063,7 +1063,10 @@ static int imx_pcie_add_lut(struct imx_pcie *imx_pcie,
> u16 rid, u8 sid)
> data1 |= IMX95_PE0_LUT_VLD;
> regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, data1);
>
> - data2 = IMX95_PE0_LUT_MASK; /* Match all bits of RID */
> + if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
> + data2 = 0x7; /* EP side's RID from RC, only 'D' is meansful */
> + else
> + data2 = IMX95_PE0_LUT_MASK; /* Match all bits of RID */
> data2 |= FIELD_PREP(IMX95_PE0_LUT_REQID, rid);
> regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, data2);
>
> @@ -1767,6 +1770,9 @@ static int imx_pcie_probe(struct platform_device *pdev)
> ret = imx_add_pcie_ep(imx_pcie, pdev);
> if (ret < 0)
> return ret;
> +
> + /* Only support one physical function */
> + imx_pcie_add_lut_by_rid(imx_pcie, 0);
> } else {
> pci->pp.use_atu_msg = true;
> ret = dw_pcie_host_init(&pci->pp);
>
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
