This series adds CAMSS support for MSM8939. It's mostly identical to MSM8916, except for some clocks and an additional CSI.
To fix black stripes across sensor output, and garbage in CSID TPG output, 2 VFE VBIF register settings are needed. So the 1st patch adds helper functions to do just that. Patch 1: adds helper for VFE VBIF settings Patch 2: adds CAMSS_8x39 version in CAMSS driver Patch 3: documents qcom,msm8939-camss DT bindings Patch 4: adds camss and cci in msm8939.dtsi Signed-off-by: Vincent Knecht <vincent.kne...@mailoo.org> --- Changes in v4: - Picked up tags - Patch 1: - Fix alignment to match opening parenthesis (Bryan) - Patch 2: no change - Patch 3: - Wrap line at 80 chars (Krzysztof) - Patch 4: no change - Link to v3: https://lore.kernel.org/r/20250530-camss-8x39-vbif-v3-0-fc91d15bb...@mailoo.org Changes in v3: - Patch 1: - Use braces around multiline (Bryan) - Rename vfe_vbif_reg_write to vfe_vbif_write_reg (Bryan) - Get rid of switch block on CAMSS version (Bryan) - Patch 2: - Get rid of switch block on CAMSS version (Bryan) - Patch 3: no change - Patch 4: no change - Tried to get rid of CCI camss_ahb but this resulted in device freeze+reboot (Konrad) - Link to v2: https://lore.kernel.org/r/20250525-camss-8x39-vbif-v2-0-6d3d5c5af...@mailoo.org Changes in v2: - Patch 1: - Fix devm_platform_ioremap_resource_byname line to not end with opening parenthesis (media-ci/1-checkpatch) - Move camss-vfe-4-1.c handling of VBIF previously in patch 2 here (Dmitry) - Patch 2: - Declare regulators in PHY entries, not CSID ones (Bryan) - Patch 3: (bindings) - Fix bindings checks for new errors (Rob) - Fix properties ordering, code-style and example (Krzysztof) - Sort reg-names, clock-names and interrupt-names alphanumerically (Bryan) - Patch 4: (dtsi) - Move #address/#size cells before status (Konrad) - Aligned CCI with msm8916, thus removing ispif_ahb mention (Konrad) If "camss_ahb should be unnecessary", it's still required by qcom,i2c-cci.yaml - Link to v1: https://lore.kernel.org/r/20250520-camss-8x39-vbif-v1-0-a12cd6006...@mailoo.org --- Vincent Knecht (4): media: qcom: camss: vfe: Add VBIF setting support media: qcom: camss: Add support for MSM8939 media: dt-bindings: Add qcom,msm8939-camss arm64: dts: qcom: msm8939: Add camss and cci .../bindings/media/qcom,msm8939-camss.yaml | 254 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 4 + arch/arm64/boot/dts/qcom/msm8939.dtsi | 146 ++++++++++++ drivers/media/platform/qcom/camss/Makefile | 1 + drivers/media/platform/qcom/camss/camss-csiphy.c | 1 + drivers/media/platform/qcom/camss/camss-ispif.c | 8 +- drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 12 + drivers/media/platform/qcom/camss/camss-vfe-vbif.c | 31 +++ drivers/media/platform/qcom/camss/camss-vfe-vbif.h | 19 ++ drivers/media/platform/qcom/camss/camss-vfe.c | 10 + drivers/media/platform/qcom/camss/camss-vfe.h | 3 + drivers/media/platform/qcom/camss/camss.c | 157 +++++++++++++ drivers/media/platform/qcom/camss/camss.h | 1 + 13 files changed, 645 insertions(+), 2 deletions(-) --- base-commit: 8566fc3b96539e3235909d6bdda198e1282beaed change-id: 20250517-camss-8x39-vbif-975ff5819198 Best regards, -- Vincent Knecht <vincent.kne...@mailoo.org>
