Hi Laurent, On Thu, May 15, 2025 at 10:58:46AM +0200, Laurent Pinchart wrote: > Hi Sakari, > > On Tue, May 06, 2025 at 08:24:03AM +0000, Sakari Ailus wrote: > > On Mon, May 05, 2025 at 11:05:56PM +0200, André Apitzsch via B4 Relay wrote: > > > From: André Apitzsch <g...@apitzsch.eu> > > > > > > Instead rely on the rate set on the clock (using assigned-clock-rates > > > etc.) > > > > > > Signed-off-by: André Apitzsch <g...@apitzsch.eu> > > > --- > > > drivers/media/i2c/imx214.c | 6 ------ > > > 1 file changed, 6 deletions(-) > > > > > > diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c > > > index > > > 9e9be47394ec768a5b34d44b06b5bbb0988da5a1..c12996e294dccebb18c608254f1e0d14dc064423 > > > 100644 > > > --- a/drivers/media/i2c/imx214.c > > > +++ b/drivers/media/i2c/imx214.c > > > @@ -32,7 +32,6 @@ > > > > > > #define IMX214_REG_FAST_STANDBY_CTRL CCI_REG8(0x0106) > > > > > > -#define IMX214_DEFAULT_CLK_FREQ 24000000 > > > #define IMX214_DEFAULT_LINK_FREQ 600000000 > > > /* Keep wrong link frequency for backward compatibility */ > > > #define IMX214_DEFAULT_LINK_FREQ_LEGACY 480000000 > > > @@ -1405,11 +1404,6 @@ static int imx214_probe(struct i2c_client *client) > > > return dev_err_probe(dev, PTR_ERR(imx214->xclk), > > > "failed to get xclk\n"); > > > > > > - ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ); > > > - if (ret) > > > - return dev_err_probe(dev, ret, > > > - "failed to set xclk frequency\n"); > > > - > > > > Oops. I missed this is what the driver was doing already. Indeed, this is > > one of the historic sensor drivers that do set the frequency in DT systems. > > > > The driver never used the clock-frequency property and instead used a fixed > > frequency. Changing the behaviour now could be problematic. > > > > There are options here that I think we could do: > > > > 1) use your v1 patch (4) which uses "clock-frequency" if it exists and > > otherwise uses the default, fixed frequency or > > > > 2) set the frequency only if the "clock-frequency" property exists. The DT > > currently requires clock-frequency and the YAML conversion was done in 2020 > > whereas the driver is from 2018. If we do this, the clock-frequency should > > be deprecated (or even removed from bingings). > > > > I wonder what others think. Cc'd Laurent in any case. > > Maybe I'm missing something, but I don't really see the issue here. The > clock-frequency DT property is currently ignored, and this patch doesn't > change that situation, does it ? > > The change of behaviour here is related to the assigned-clock-rates > property. If that property is specified today, it will set the clock > rate, and the driver will override it to 24MHz right after. With this > patch, the clock rate won't be overridden. I think the risk of > regression is very low here, as I don't expect systems to set > assigned-clock-rates in DT to a value different than 24MHz and expect > the driver to override it.
If the DTS had assigned-clock-rates set correctly, then yes. How much can we trust the older DTS did have that? -- Regards, Sakari Ailus
