While in the past the 'reg' properties were often written using decimal
'0' for #address-cells = <2> & #size-cells = <2>, nowadays the style is
to use hexadecimal '0x0' instead.
Align this dtsi file to the new style to make it consistent, and don't
use mixed 0x0 and 0 anymore.
Signed-off-by: Luca Weiss <luca.we...@fairphone.com>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 204 +++++++++++++++++------------------
1 file changed, 102 insertions(+), 102 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi
b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index
00ad1d09a19558d9e2bc61f1a81a36d466adc88e..42f9d16c2fa6da66a8bb524a33c2687a1e4b40e0
100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -566,114 +566,114 @@ reserved_memory: reserved-memory {
ranges;
hyp_mem: memory@80000000 {
- reg = <0 0x80000000 0 0x600000>;
+ reg = <0x0 0x80000000 0x0 0x600000>;
no-map;
};
xbl_aop_mem: memory@80700000 {
- reg = <0 0x80700000 0 0x160000>;
+ reg = <0x0 0x80700000 0x0 0x160000>;
no-map;
};
cmd_db: memory@80860000 {
compatible = "qcom,cmd-db";
- reg = <0 0x80860000 0 0x20000>;
+ reg = <0x0 0x80860000 0x0 0x20000>;
no-map;
};
sec_apps_mem: memory@808ff000 {
- reg = <0 0x808ff000 0 0x1000>;
+ reg = <0x0 0x808ff000 0x0 0x1000>;
no-map;
};
smem_mem: memory@80900000 {
- reg = <0 0x80900000 0 0x200000>;
+ reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
cdsp_sec_mem: memory@80b00000 {
- reg = <0 0x80b00000 0 0x1e00000>;
+ reg = <0x0 0x80b00000 0x0 0x1e00000>;
no-map;
};
pil_camera_mem: memory@86000000 {
- reg = <0 0x86000000 0 0x500000>;
+ reg = <0x0 0x86000000 0x0 0x500000>;
no-map;
};
pil_npu_mem: memory@86500000 {
- reg = <0 0x86500000 0 0x500000>;
+ reg = <0x0 0x86500000 0x0 0x500000>;
no-map;
};
pil_video_mem: memory@86a00000 {
- reg = <0 0x86a00000 0 0x500000>;
+ reg = <0x0 0x86a00000 0x0 0x500000>;
no-map;
};
pil_cdsp_mem: memory@86f00000 {
- reg = <0 0x86f00000 0 0x1e00000>;
+ reg = <0x0 0x86f00000 0x0 0x1e00000>;
no-map;
};
pil_adsp_mem: memory@88d00000 {
- reg = <0 0x88d00000 0 0x2800000>;
+ reg = <0x0 0x88d00000 0x0 0x2800000>;
no-map;
};
wlan_fw_mem: memory@8b500000 {
- reg = <0 0x8b500000 0 0x200000>;
+ reg = <0x0 0x8b500000 0x0 0x200000>;
no-map;
};
pil_ipa_fw_mem: memory@8b700000 {
- reg = <0 0x8b700000 0 0x10000>;
+ reg = <0x0 0x8b700000 0x0 0x10000>;
no-map;
};
pil_ipa_gsi_mem: memory@8b710000 {
- reg = <0 0x8b710000 0 0x5400>;
+ reg = <0x0 0x8b710000 0x0 0x5400>;
no-map;
};
pil_modem_mem: memory@8b800000 {
- reg = <0 0x8b800000 0 0xf800000>;
+ reg = <0x0 0x8b800000 0x0 0xf800000>;
no-map;
};
cont_splash_memory: memory@a0000000 {
- reg = <0 0xa0000000 0 0x2300000>;
+ reg = <0x0 0xa0000000 0x0 0x2300000>;
no-map;
};
dfps_data_memory: memory@a2300000 {
- reg = <0 0xa2300000 0 0x100000>;
+ reg = <0x0 0xa2300000 0x0 0x100000>;
no-map;
};
removed_region: memory@c0000000 {
- reg = <0 0xc0000000 0 0x3900000>;
+ reg = <0x0 0xc0000000 0x0 0x3900000>;
no-map;
};
pil_gpu_mem: memory@f0d00000 {
- reg = <0 0xf0d00000 0 0x1000>;
+ reg = <0x0 0xf0d00000 0x0 0x1000>;
no-map;
};
debug_region: memory@ffb00000 {
- reg = <0 0xffb00000 0 0xc0000>;
+ reg = <0x0 0xffb00000 0x0 0xc0000>;
no-map;
};
last_log_region: memory@ffbc0000 {
- reg = <0 0xffbc0000 0 0x40000>;
+ reg = <0x0 0xffbc0000 0x0 0x40000>;
no-map;
};
ramoops: ramoops@ffc00000 {
compatible = "ramoops";
- reg = <0 0xffc00000 0 0x100000>;
+ reg = <0x0 0xffc00000 0x0 0x100000>;
record-size = <0x1000>;
console-size = <0x40000>;
pmsg-size = <0x20000>;
@@ -682,7 +682,7 @@ ramoops: ramoops@ffc00000 {
};
cmdline_region: memory@ffd00000 {
- reg = <0 0xffd00000 0 0x1000>;
+ reg = <0x0 0xffd00000 0x0 0x1000>;
no-map;
};
};
@@ -786,7 +786,7 @@ soc: soc@0 {
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sm6350";
- reg = <0 0x00100000 0 0x1f0000>;
+ reg = <0x0 0x00100000 0x0 0x1f0000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -800,7 +800,7 @@ gcc: clock-controller@100000 {
ipcc: mailbox@408000 {
compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
- reg = <0 0x00408000 0 0x1000>;
+ reg = <0x0 0x00408000 0x0 0x1000>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
@@ -809,7 +809,7 @@ ipcc: mailbox@408000 {
qfprom: qfprom@784000 {
compatible = "qcom,sm6350-qfprom", "qcom,qfprom";
- reg = <0 0x00784000 0 0x3000>;
+ reg = <0x0 0x00784000 0x0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -821,16 +821,16 @@ gpu_speed_bin: gpu-speed-bin@2015 {
rng: rng@793000 {
compatible = "qcom,prng-ee";
- reg = <0 0x00793000 0 0x1000>;
+ reg = <0x0 0x00793000 0x0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
sdhc_1: mmc@7c4000 {
compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
- reg = <0 0x007c4000 0 0x1000>,
- <0 0x007c5000 0 0x1000>,
- <0 0x007c8000 0 0x8000>;
+ reg = <0x0 0x007c4000 0x0 0x1000>,
+ <0x0 0x007c5000 0x0 0x1000>,
+ <0x0 0x007c8000 0x0 0x8000>;
reg-names = "hc", "cqhci", "ice";
interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
@@ -875,7 +875,7 @@ opp-384000000 {
gpi_dma0: dma-controller@800000 {
compatible = "qcom,sm6350-gpi-dma";
- reg = <0 0x00800000 0 0x60000>;
+ reg = <0x0 0x00800000 0x0 0x60000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -907,7 +907,7 @@ qupv3_id_0: geniqup@8c0000 {
i2c0: i2c@880000 {
compatible = "qcom,geni-i2c";
- reg = <0 0x00880000 0 0x4000>;
+ reg = <0x0 0x00880000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
@@ -927,7 +927,7 @@ i2c0: i2c@880000 {
uart1: serial@884000 {
compatible = "qcom,geni-uart";
- reg = <0 0x00884000 0 0x4000>;
+ reg = <0x0 0x00884000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
@@ -943,7 +943,7 @@ uart1: serial@884000 {
i2c2: i2c@888000 {
compatible = "qcom,geni-i2c";
- reg = <0 0x00888000 0 0x4000>;
+ reg = <0x0 0x00888000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
@@ -964,7 +964,7 @@ i2c2: i2c@888000 {
gpi_dma1: dma-controller@900000 {
compatible = "qcom,sm6350-gpi-dma";
- reg = <0 0x00900000 0 0x60000>;
+ reg = <0x0 0x00900000 0x0 0x60000>;
interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>,
@@ -996,7 +996,7 @@ qupv3_id_1: geniqup@9c0000 {
i2c6: i2c@980000 {
compatible = "qcom,geni-i2c";
- reg = <0 0x00980000 0 0x4000>;
+ reg = <0x0 0x00980000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
@@ -1016,7 +1016,7 @@ i2c6: i2c@980000 {
i2c7: i2c@984000 {
compatible = "qcom,geni-i2c";
- reg = <0 0x00984000 0 0x4000>;
+ reg = <0x0 0x00984000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
@@ -1036,7 +1036,7 @@ i2c7: i2c@984000 {
i2c8: i2c@988000 {
compatible = "qcom,geni-i2c";
- reg = <0 0x00988000 0 0x4000>;
+ reg = <0x0 0x00988000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
@@ -1056,7 +1056,7 @@ i2c8: i2c@988000 {
uart9: serial@98c000 {
compatible = "qcom,geni-debug-uart";
- reg = <0 0x0098c000 0 0x4000>;
+ reg = <0x0 0x0098c000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
@@ -1070,7 +1070,7 @@ uart9: serial@98c000 {
i2c10: i2c@990000 {
compatible = "qcom,geni-i2c";
- reg = <0 0x00990000 0 0x4000>;
+ reg = <0x0 0x00990000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
@@ -1091,14 +1091,14 @@ i2c10: i2c@990000 {
config_noc: interconnect@1500000 {
compatible = "qcom,sm6350-config-noc";
- reg = <0 0x01500000 0 0x28000>;
+ reg = <0x0 0x01500000 0x0 0x28000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sm6350-system-noc";
- reg = <0 0x01620000 0 0x17080>;
+ reg = <0x0 0x01620000 0x0 0x17080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
@@ -1111,14 +1111,14 @@ clk_virt: interconnect-clk-virt {
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sm6350-aggre1-noc";
- reg = <0 0x016e0000 0 0x15080>;
+ reg = <0x0 0x016e0000 0x0 0x15080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sm6350-aggre2-noc";
- reg = <0 0x01700000 0 0x1f880>;
+ reg = <0x0 0x01700000 0x0 0x1f880>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
@@ -1131,7 +1131,7 @@ compute_noc: interconnect-compute-noc {
mmss_noc: interconnect@1740000 {
compatible = "qcom,sm6350-mmss-noc";
- reg = <0 0x01740000 0 0x1c100>;
+ reg = <0x0 0x01740000 0x0 0x1c100>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -1139,8 +1139,8 @@ mmss_noc: interconnect@1740000 {
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
- reg = <0 0x01d84000 0 0x3000>,
- <0 0x01d90000 0 0x8000>;
+ reg = <0x0 0x01d84000 0x0 0x3000>,
+ <0x0 0x01d90000 0x0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy>;
@@ -1188,7 +1188,7 @@ ufs_mem_hc: ufshc@1d84000 {
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm6350-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1000>;
+ reg = <0x0 0x01d87000 0x0 0x1000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -1209,7 +1209,7 @@ ufs_mem_phy: phy@1d87000 {
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
- reg = <0 0x01dc4000 0 0x24000>;
+ reg = <0x0 0x01dc4000 0x0 0x24000>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
@@ -1225,7 +1225,7 @@ cryptobam: dma-controller@1dc4000 {
crypto: crypto@1dfa000 {
compatible = "qcom,sm6350-qce", "qcom,sm8150-qce",
"qcom,qce";
- reg = <0 0x01dfa000 0 0x6000>;
+ reg = <0x0 0x01dfa000 0x0 0x6000>;
dmas = <&cryptobam 4>, <&cryptobam 5>;
dma-names = "rx", "tx";
iommus = <&apps_smmu 0x426 0x11>,
@@ -1243,9 +1243,9 @@ ipa: ipa@1e40000 {
iommus = <&apps_smmu 0x440 0x0>,
<&apps_smmu 0x442 0x0>;
- reg = <0 0x01e40000 0 0x8000>,
- <0 0x01e50000 0 0x3000>,
- <0 0x01e04000 0 0x23000>;
+ reg = <0x0 0x01e40000 0x0 0x8000>,
+ <0x0 0x01e50000 0x0 0x3000>,
+ <0x0 0x01e04000 0x0 0x23000>;
reg-names = "ipa-reg",
"ipa-shared",
"gsi";
@@ -1351,8 +1351,8 @@ compute-cb@5 {
gpu: gpu@3d00000 {
compatible = "qcom,adreno-619.0", "qcom,adreno";
- reg = <0 0x03d00000 0 0x40000>,
- <0 0x03d9e000 0 0x1000>;
+ reg = <0x0 0x03d00000 0x0 0x40000>,
+ <0x0 0x03d9e000 0x0 0x1000>;
reg-names = "kgsl_3d0_reg_memory",
"cx_mem";
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
@@ -1419,7 +1419,7 @@ opp-253000000 {
adreno_smmu: iommu@3d40000 {
compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu",
"qcom,smmu-v2";
- reg = <0 0x03d40000 0 0x10000>;
+ reg = <0x0 0x03d40000 0x0 0x10000>;
#iommu-cells = <1>;
#global-interrupts = <2>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
@@ -1445,9 +1445,9 @@ adreno_smmu: iommu@3d40000 {
gmu: gmu@3d6a000 {
compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu";
- reg = <0 0x03d6a000 0 0x31000>,
- <0 0x0b290000 0 0x10000>,
- <0 0x0b490000 0 0x10000>;
+ reg = <0x0 0x03d6a000 0x0 0x31000>,
+ <0x0 0x0b290000 0x0 0x10000>,
+ <0x0 0x0b490000 0x0 0x10000>;
reg-names = "gmu",
"gmu_pdc",
"gmu_pdc_seq";
@@ -1489,7 +1489,7 @@ opp-200000000 {
gpucc: clock-controller@3d90000 {
compatible = "qcom,sm6350-gpucc";
- reg = <0 0x03d90000 0 0x9000>;
+ reg = <0x0 0x03d90000 0x0 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK>,
<&gcc GCC_GPU_GPLL0_DIV_CLK>;
@@ -1543,7 +1543,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
cdsp: remoteproc@8300000 {
compatible = "qcom,sm6350-cdsp-pas";
- reg = <0 0x08300000 0 0x10000>;
+ reg = <0x0 0x08300000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 578
IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 0
IRQ_TYPE_EDGE_RISING>,
@@ -1642,7 +1642,7 @@ compute-cb@8 {
sdhc_2: mmc@8804000 {
compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
- reg = <0 0x08804000 0 0x1000>;
+ reg = <0x0 0x08804000 0x0 0x1000>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
@@ -1691,7 +1691,7 @@ opp-202000000 {
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm6350-qusb2-phy",
"qcom,qusb2-v2-phy";
- reg = <0 0x088e3000 0 0x400>;
+ reg = <0x0 0x088e3000 0x0 0x400>;
status = "disabled";
#phy-cells = <0>;
@@ -1703,7 +1703,7 @@ usb_1_hsphy: phy@88e3000 {
usb_1_qmpphy: phy@88e8000 {
compatible = "qcom,sm6350-qmp-usb3-dp-phy";
- reg = <0 0x088e8000 0 0x3000>;
+ reg = <0x0 0x088e8000 0x0 0x3000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
@@ -1754,27 +1754,27 @@ usb_1_qmpphy_dp_in: endpoint {
dc_noc: interconnect@9160000 {
compatible = "qcom,sm6350-dc-noc";
- reg = <0 0x09160000 0 0x3200>;
+ reg = <0x0 0x09160000 0x0 0x3200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system-cache-controller@9200000 {
compatible = "qcom,sm6350-llcc";
- reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0
0x50000>;
+ reg = <0x0 0x09200000 0x0 0x50000>, <0x0 0x09600000 0x0
0x50000>;
reg-names = "llcc0_base", "llcc_broadcast_base";
};
gem_noc: interconnect@9680000 {
compatible = "qcom,sm6350-gem-noc";
- reg = <0 0x09680000 0 0x3e200>;
+ reg = <0x0 0x09680000 0x0 0x3e200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
npu_noc: interconnect@9990000 {
compatible = "qcom,sm6350-npu-noc";
- reg = <0 0x09990000 0 0x1600>;
+ reg = <0x0 0x09990000 0x0 0x1600>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -1878,7 +1878,7 @@ opp-10 {
usb_1: usb@a6f8800 {
compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
+ reg = <0x0 0x0a6f8800 0x0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
@@ -1916,7 +1916,7 @@ usb_1: usb@a6f8800 {
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xcd00>;
+ reg = <0x0 0x0a600000 0x0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x540 0x0>;
snps,dis_u2_susphy_quirk;
@@ -1954,7 +1954,7 @@ usb_1_dwc3_ss_out: endpoint {
cci0: cci@ac4a000 {
compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
- reg = <0 0x0ac4a000 0 0x1000>;
+ reg = <0x0 0x0ac4a000 0x0 0x1000>;
interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>;
power-domains = <&camcc TITAN_TOP_GDSC>;
@@ -2001,7 +2001,7 @@ cci0_i2c1: i2c-bus@1 {
cci1: cci@ac4b000 {
compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
- reg = <0 0x0ac4b000 0 0x1000>;
+ reg = <0x0 0x0ac4b000 0x0 0x1000>;
interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>;
power-domains = <&camcc TITAN_TOP_GDSC>;
@@ -2043,7 +2043,7 @@ cci1_i2c0: i2c-bus@0 {
camcc: clock-controller@ad00000 {
compatible = "qcom,sm6350-camcc";
- reg = <0 0x0ad00000 0 0x16000>;
+ reg = <0x0 0x0ad00000 0x0 0x16000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -2052,7 +2052,7 @@ camcc: clock-controller@ad00000 {
mdss: display-subsystem@ae00000 {
compatible = "qcom,sm6350-mdss";
- reg = <0 0x0ae00000 0 0x1000>;
+ reg = <0x0 0x0ae00000 0x0 0x1000>;
reg-names = "mdss";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -2084,8 +2084,8 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sm6350-dpu";
- reg = <0 0x0ae01000 0 0x8f000>,
- <0 0x0aeb0000 0 0x2008>;
+ reg = <0x0 0x0ae01000 0x0 0x8f000>,
+ <0x0 0x0aeb0000 0x0 0x2008>;
reg-names = "mdp", "vbif";
interrupt-parent = <&mdss>;
@@ -2168,11 +2168,11 @@ opp-560000000 {
mdss_dp: displayport-controller@ae90000 {
compatible = "qcom,sm6350-dp", "qcom,sm8350-dp";
- reg = <0 0xae90000 0 0x200>,
- <0 0xae90200 0 0x200>,
- <0 0xae90400 0 0x600>,
- <0 0xae91000 0 0x400>,
- <0 0xae91400 0 0x400>;
+ reg = <0x0 0xae90000 0x0 0x200>,
+ <0x0 0xae90200 0x0 0x200>,
+ <0x0 0xae90400 0x0 0x600>,
+ <0x0 0xae91000 0x0 0x400>,
+ <0x0 0xae91400 0x0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -2248,7 +2248,7 @@ opp-810000000 {
mdss_dsi0: dsi@ae94000 {
compatible = "qcom,sm6350-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae94000 0 0x400>;
+ reg = <0x0 0x0ae94000 0x0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
@@ -2324,9 +2324,9 @@ opp-358000000 {
mdss_dsi0_phy: phy@ae94400 {
compatible = "qcom,dsi-phy-10nm";
- reg = <0 0x0ae94400 0 0x200>,
- <0 0x0ae94600 0 0x280>,
- <0 0x0ae94a00 0 0x1e0>;
+ reg = <0x0 0x0ae94400 0x0 0x200>,
+ <0x0 0x0ae94600 0x0 0x280>,
+ <0x0 0x0ae94a00 0x0 0x1e0>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
@@ -2344,7 +2344,7 @@ mdss_dsi0_phy: phy@ae94400 {
dispcc: clock-controller@af00000 {
compatible = "qcom,sm6350-dispcc";
- reg = <0 0x0af00000 0 0x20000>;
+ reg = <0x0 0x0af00000 0x0 0x20000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK>,
<&mdss_dsi0_phy 0>,
@@ -2364,7 +2364,7 @@ dispcc: clock-controller@af00000 {
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm6350-pdc", "qcom,pdc";
- reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
+ reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x17c000f0 0x0
0x64>;
qcom,pdc-ranges = <0 480 94>, <94 609 31>,
<125 63 1>, <126 655 12>, <138 139
15>;
#interrupt-cells = <2>;
@@ -2374,8 +2374,8 @@ pdc: interrupt-controller@b220000 {
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c263000 0 0x1ff>, /* TM */
- <0 0x0c222000 0 0x8>; /* SROT */
+ reg = <0x0 0x0c263000 0x0 0x1ff>, /* TM */
+ <0x0 0x0c222000 0x0 0x8>; /* SROT */
#qcom,sensors = <16>;
interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -2385,8 +2385,8 @@ tsens0: thermal-sensor@c263000 {
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c265000 0 0x1ff>, /* TM */
- <0 0x0c223000 0 0x8>; /* SROT */
+ reg = <0x0 0x0c265000 0x0 0x1ff>, /* TM */
+ <0x0 0x0c223000 0x0 0x8>; /* SROT */
#qcom,sensors = <16>;
interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -2396,7 +2396,7 @@ tsens1: thermal-sensor@c265000 {
aoss_qmp: power-management@c300000 {
compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
- reg = <0 0x0c300000 0 0x1000>;
+ reg = <0x0 0x0c300000 0x0 0x1000>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
@@ -2406,11 +2406,11 @@ aoss_qmp: power-management@c300000 {
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0 0x0c440000 0 0x1100>,
- <0 0x0c600000 0 0x2000000>,
- <0 0x0e600000 0 0x100000>,
- <0 0x0e700000 0 0xa0000>,
- <0 0x0c40a000 0 0x26000>;
+ reg = <0x0 0x0c440000 0x0 0x1100>,
+ <0x0 0x0c600000 0x0 0x2000000>,
+ <0x0 0x0e600000 0x0 0x100000>,
+ <0x0 0x0e700000 0x0 0xa0000>,
+ <0x0 0x0c40a000 0x0 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -2424,7 +2424,7 @@ spmi_bus: spmi@c440000 {
tlmm: pinctrl@f100000 {
compatible = "qcom,sm6350-tlmm";
- reg = <0 0x0f100000 0 0x300000>;
+ reg = <0x0 0x0f100000 0x0 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
@@ -2603,7 +2603,7 @@ qup_uart1_tx: qup-uart1-tx-default-state {
apps_smmu: iommu@15000000 {
compatible = "qcom,sm6350-smmu-500", "arm,mmu-500";
- reg = <0 0x15000000 0 0x100000>;
+ reg = <0x0 0x15000000 0x0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
@@ -2701,7 +2701,7 @@ intc: interrupt-controller@17a00000 {
watchdog@17c10000 {
compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
- reg = <0 0x17c10000 0 0x1000>;
+ reg = <0x0 0x17c10000 0x0 0x1000>;
clocks = <&sleep_clk>;
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
@@ -2855,7 +2855,7 @@ osm_l3: interconnect@18321000 {
cpufreq_hw: cpufreq@18323000 {
compatible = "qcom,sm6350-cpufreq-hw",
"qcom,cpufreq-hw";
- reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>;
+ reg = <0x0 0x18323000 0x0 0x1000>, <0x0 0x18325800 0x0
0x1000>;
reg-names = "freq-domain0", "freq-domain1";
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
@@ -2866,7 +2866,7 @@ cpufreq_hw: cpufreq@18323000 {
wifi: wifi@18800000 {
compatible = "qcom,wcn3990-wifi";
- reg = <0 0x18800000 0 0x800000>;
+ reg = <0x0 0x18800000 0x0 0x800000>;
reg-names = "membase";
memory-region = <&wlan_fw_mem>;
interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
--
2.49.0
