Enable all relevant nodes to support remoteproc with imx8mp-evk board.
- add rproc specific memory regions
- enable dsp_reserved node
- enable mu2 node
- enable dsp node
Signed-off-by: Daniel Baluta <daniel.bal...@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index c26954e5a605..9ab3ee93a35b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -309,6 +309,16 @@ &aud2htx {
status = "okay";
};
+&dsp_reserved {
+ status = "okay";
+};
+
+&dsp {
+ memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+ <&dsp_vdev0vring1>, <&dsp_reserved>;
+ status = "okay";
+};
+
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
@@ -690,6 +700,10 @@ dsi_out: endpoint {
};
};
+&mu2 {
+ status = "okay";
+};
+
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
clocks = <&pcie0_refclk>;
--
2.43.0
