The .detach rproc ops implementations in TI K3 R5, DSP and M4
remoteproc drivers are NOPs. Refactor the implementations into
ti_k3_common.c driver as k3_rproc_detach() and align R5, DSP and M4
drivers to register this common function as .detach ops.
Signed-off-by: Beleswar Padhi <b-pa...@ti.com>
---
drivers/remoteproc/ti_k3_common.c | 10 ++++++++++
drivers/remoteproc/ti_k3_common.h | 1 +
drivers/remoteproc/ti_k3_dsp_remoteproc.c | 11 +----------
drivers/remoteproc/ti_k3_m4_remoteproc.c | 14 +-------------
drivers/remoteproc/ti_k3_r5_remoteproc.c | 11 +----------
5 files changed, 14 insertions(+), 33 deletions(-)
diff --git a/drivers/remoteproc/ti_k3_common.c
b/drivers/remoteproc/ti_k3_common.c
index 9e80d4da0d43..84e263f159a0 100644
--- a/drivers/remoteproc/ti_k3_common.c
+++ b/drivers/remoteproc/ti_k3_common.c
@@ -309,5 +309,15 @@ EXPORT_SYMBOL_GPL(k3_rproc_stop);
int k3_rproc_attach(struct rproc *rproc) { return 0; }
EXPORT_SYMBOL_GPL(k3_rproc_attach);
+/*
+ * Detach from a running remote processor (IPC-only mode)
+ *
+ * The rproc detach callback is a NOP. The remote processor is not stopped and
+ * will be left in booted state in IPC-only mode. This callback is invoked only
+ * in IPC-only mode and exists for sanity sake
+ */
+int k3_rproc_detach(struct rproc *rproc) { return 0; }
+EXPORT_SYMBOL_GPL(k3_rproc_detach);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TI K3 common Remoteproc code");
diff --git a/drivers/remoteproc/ti_k3_common.h
b/drivers/remoteproc/ti_k3_common.h
index 93f41ee41505..97345349b818 100644
--- a/drivers/remoteproc/ti_k3_common.h
+++ b/drivers/remoteproc/ti_k3_common.h
@@ -98,4 +98,5 @@ int k3_rproc_unprepare(struct rproc *rproc);
int k3_rproc_start(struct rproc *rproc);
int k3_rproc_stop(struct rproc *rproc);
int k3_rproc_attach(struct rproc *rproc);
+int k3_rproc_detach(struct rproc *rproc);
#endif /* REMOTEPROC_TI_K3_COMMON_H */
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index d7ae4b202f92..dd81bcc8e1e4 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -58,15 +58,6 @@ static int k3_dsp_rproc_start(struct rproc *rproc)
return 0;
}
-/*
- * Detach from a running DSP remote processor (IPC-only mode)
- *
- * This rproc detach callback is a NOP. The DSP core is not stopped and will be
- * left to continue to run its booted firmware. This callback is invoked only
in
- * IPC-only mode and exists for sanity sake.
- */
-static int k3_dsp_rproc_detach(struct rproc *rproc) { return 0; }
-
/*
* This function implements the .get_loaded_rsc_table() callback and is used
* to provide the resource table for a booted DSP in IPC-only mode. The K3 DSP
@@ -162,6 +153,7 @@ static const struct rproc_ops k3_dsp_rproc_ops = {
.start = k3_dsp_rproc_start,
.stop = k3_rproc_stop,
.attach = k3_rproc_attach,
+ .detach = k3_rproc_detach,
.kick = k3_rproc_kick,
.da_to_va = k3_dsp_rproc_da_to_va,
};
@@ -387,7 +379,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
dev_info(dev, "configured DSP for IPC-only mode\n");
rproc->state = RPROC_DETACHED;
/* override rproc ops with only required IPC-only mode ops */
- rproc->ops->detach = k3_dsp_rproc_detach;
rproc->ops->get_loaded_rsc_table = k3_dsp_get_loaded_rsc_table;
} else {
dev_info(dev, "configured DSP for remoteproc mode\n");
diff --git a/drivers/remoteproc/ti_k3_m4_remoteproc.c
b/drivers/remoteproc/ti_k3_m4_remoteproc.c
index b52a1014c934..accf8b9aea6e 100644
--- a/drivers/remoteproc/ti_k3_m4_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_m4_remoteproc.c
@@ -244,25 +244,13 @@ static void k3_m4_release_tsp(void *data)
ti_sci_proc_release(tsp);
}
-/*
- * Detach from a running M4 remote processor (IPC-only mode)
- *
- * This rproc detach callback performs the opposite operation to attach
- * callback, the M4 core is not stopped and will be left to continue to
- * run its booted firmware. This callback is invoked only in IPC-only mode.
- */
-static int k3_m4_rproc_detach(struct rproc *rproc)
-{
- return 0;
-}
-
static const struct rproc_ops k3_m4_rproc_ops = {
.prepare = k3_rproc_prepare,
.unprepare = k3_rproc_unprepare,
.start = k3_rproc_start,
.stop = k3_rproc_stop,
.attach = k3_rproc_attach,
- .detach = k3_m4_rproc_detach,
+ .detach = k3_rproc_detach,
.kick = k3_rproc_kick,
.da_to_va = k3_m4_rproc_da_to_va,
.get_loaded_rsc_table = k3_m4_get_loaded_rsc_table,
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c
b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index fe1bc3a74b09..a17c4b5418ae 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -559,15 +559,6 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
return ret;
}
-/*
- * Detach from a running R5F remote processor (IPC-only mode)
- *
- * The R5F detach callback is a NOP. The R5F cores are not stopped and will be
- * left in booted state in IPC-only mode. This callback is invoked only in
- * IPC-only mode and exists for sanity sake.
- */
-static int k3_r5_rproc_detach(struct rproc *rproc) { return 0; }
-
/*
* This function implements the .get_loaded_rsc_table() callback and is used
* to provide the resource table for the booted R5F in IPC-only mode. The K3
R5F
@@ -1049,7 +1040,7 @@ static int k3_r5_rproc_configure_mode(struct k3_rproc
*kproc)
kproc->rproc->ops->start = NULL;
kproc->rproc->ops->stop = NULL;
kproc->rproc->ops->attach = k3_rproc_attach;
- kproc->rproc->ops->detach = k3_r5_rproc_detach;
+ kproc->rproc->ops->detach = k3_rproc_detach;
kproc->rproc->ops->get_loaded_rsc_table =
k3_r5_get_loaded_rsc_table;
} else if (!c_state) {
--
2.34.1
