current x86.git Command line: apic=debug acpi.debug_level=0x0000000F debug initcall_debug pci=routeirq ramdisk_size=131072 root=/dev/ram0 rw ip=dhcp console=uart8250,io,0x3f8,115200n8 BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009bc00 (usable) BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dcff0000 (usable) BIOS-e820: 00000000dcff0000 - 00000000dcffe000 (ACPI data) BIOS-e820: 00000000dcffe000 - 00000000dd000000 (ACPI NVS) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000123000000 (usable) Early serial console at I/O port 0x3f8 (options '115200n8') console [uart0] enabled end_pfn_map = 1191936 DMI present. ... SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 1 PXM 1 0-a0000 SRAT: Node 1 PXM 1 0-dd000000 SRAT: Node 1 PXM 1 0-123000000 ACPI: SLIT: nodes = 2 10 13 13 10 mapped APIC to ffffffffff5fb000 ( fee00000) Bootmem setup node 1 0000000000000000-0000000123000000 NODE_DATA [000000000000e000 - 0000000000014fff] bootmap [0000000000015000 - 00000000000395ff] pages 25 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-d9c273] TEXT DATA BSS early res: 3 [7e6f4000-7fff3a25] RAMDISK early res: 4 [9bc00-9dbff] EBDA early res: 5 [8000-dfff] PGTABLE Could not find start_pfn for node 0 Pid: 0, comm: swapper Not tainted 2.6.24-smp-04921-gbce08dc-dirty #43
Call Trace: [<ffffffff80c200d6>] free_area_init_node+0x22/0x381 [<ffffffff804539e5>] generic_swap+0x0/0x17 [<ffffffff80c06a1b>] find_zone_movable_pfns_for_nodes+0x54/0x271 [<ffffffff80c06f4a>] free_area_init_nodes+0x239/0x287 [<ffffffff80c0203a>] paging_init+0x46/0x4c [<ffffffff80bf9dba>] setup_arch+0x3c3/0x44e [<ffffffff80bf38d3>] start_kernel+0x6f/0x2c7 [<ffffffff80bf31e1>] _sinittext+0x1e1/0x1e8 RIP 0x10 2.6.24 discontinuous and slab works well 2.6.24 sparse and slub will get oops ehci_hcd 0000:00:02.1: EHCI Host Controller Unable to handle kernel paging request at 0000000000003078 RIP: [<ffffffff8026585f>] __alloc_pages+0x7d/0x33a PGD 0 Oops: 0000 [1] SMP CPU 3 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-smp #1 RIP: 0010:[<ffffffff8026585f>] [<ffffffff8026585f>] __alloc_pages+0x7d/0x33a RSP: 0018:ffff810122a55bc0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: 0000000000003070 RSI: 0000000000000000 RDI: 00000000000000d0 RBP: 00000000000000d0 R08: ffff810001025be0 R09: ffff810122a55b00 R10: ffffffff8085e2a0 R11: 00000000000000a0 R12: 0000000000003070 R13: 0000000000000000 R14: 00000000000000d0 R15: ffff810122a52000 FS: 0000000000000000(0000) GS:ffff810122c02f00(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000003078 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff810122a54000, task ffff810122a52000) Stack: ffff810122a55d20 0000000080455b55 0000000000000000 0000000000000080 0000000000003078 0000000022a55d10 00000010000200d0 ffff81011f5ea000 0000000000000020 0000000000000000 00000000fffffff2 0000000000000000 Call Trace: [<ffffffff80282ea1>] new_slab+0xdd/0x236 [<ffffffff802831a1>] __slab_alloc+0x1a7/0x397 [<ffffffff804cea6f>] dma_pool_create+0x86/0x147 [<ffffffff80283697>] kmem_cache_alloc_node+0x3e/0x6d [<ffffffff804cea6f>] dma_pool_create+0x86/0x147 [<ffffffff80667e52>] hcd_buffer_create+0x57/0x89 [<ffffffff80450032>] compat_blkdev_ioctl+0xd72/0x11f4 [<ffffffff80662da4>] usb_add_hcd+0x72/0x59f [<ffffffff8066c541>] usb_hcd_pci_probe+0x1e4/0x28b [<ffffffff80461de6>] pci_device_probe+0xd1/0x136 [<ffffffff804caf0f>] driver_probe_device+0xd3/0x150 [<ffffffff804cb02e>] __driver_attach+0x0/0x93 [<ffffffff804cb088>] __driver_attach+0x5a/0x93 [<ffffffff804ca36d>] bus_for_each_dev+0x43/0x6e [<ffffffff804ca69d>] bus_add_driver+0x79/0x1bd [<ffffffff80461fbe>] __pci_register_driver+0x5b/0x8d [<ffffffff80bbf63a>] kernel_init+0x175/0x2e1 [<ffffffff8020cd28>] child_rip+0xa/0x12 [<ffffffff80bbf4c5>] kernel_init+0x0/0x2e1 [<ffffffff8020cd1e>] child_rip+0x0/0x12 Code: 49 83 7c 24 08 00 75 0e 48 c7 44 24 38 00 00 00 00 e9 93 02 RIP [<ffffffff8026585f>] __alloc_pages+0x7d/0x33a RSP <ffff810122a55bc0> CR2: 0000000000003078 ---[ end trace c08baa60a7f2ad32 ]--- Kernel panic - not syncing: Attempted to kill init! -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
