Hi Colton,

On Sat, Feb 08, 2025 at 02:01:09AM +0000, Colton Lewis wrote:
> For PMUv3, the register MDCR_EL2.HPMN partitiones the PMU counters
> into two ranges where counters 0..HPMN-1 are accessible by EL1 and, if
> allowed, EL0 while counters HPMN..N are only accessible by EL2.
> 
> Introduce a module parameter in the PMUv3 driver to set this
> register. The name reserved_host_counters reflects the intent to
> reserve some counters for the host so the guest may eventually be
> allowed direct access to a subset of PMU functionality for increased
> performance.
> 
> Track HPMN and whether the pmu is partitioned in struct arm_pmu
> because KVM will need to know that to handle guests correctly.
> 
> While FEAT_HPMN0 does allow HPMN to be set to 0, this patch
> specifically disallows that case because it's not useful given the
> intention to allow guests access to their own counters.

Quite the contrary.

FEAT_HPMN0 is useful if userspace wants to provide a vPMU that has a
fixed cycle counter w/o event counters. Certain OSes refuse to boot
without it...

> static inline u32 read_mdcr(void)
> {
>       return read_sysreg(HDCR);
> }
> 
> static inline void write_mdcr(u32 val)
> {
>       write_sysreg(val, HDCR);
> }
> 

Hmm... While this fixes the 32bit compilation issues, it opens a new can
of worms.

VHE is a 64bit only feature, so you're *guaranteed* that these accessors
will undef (running at EL1).

> +static void armv8pmu_partition(u8 hpmn)
> +{
> +     u64 mdcr = armv8pmu_mdcr_read();
> +
> +     mdcr &= ~ARMV8_PMU_MDCR_HPMN;
> +     mdcr |= FIELD_PREP(ARMV8_PMU_MDCR_HPMN, hpmn);
> +     /* Prevent guest counters counting at EL2 */
> +     mdcr |= ARMV8_PMU_MDCR_HPMD;
> +
> +     armv8pmu_mdcr_write(mdcr);
> +}
> +

After giving this a read, I don't think the host PMU driver should care
about MDCR_EL2 at all. The only time that 'guest' events are loaded into
the PMU is between vcpu_load() / vcpu_put(), at which point *KVM* has
reconfigured MDCR_EL2.

I'm not sure if there's much involvement with the host PMU driver beyond
it pinky-swearing to only use the specified counters. KVM is what
actually will program HPMN.

That'd alleviate the PMU driver from having VHE awareness or caring
about MDCR_EL2.

-- 
Thanks,
Oliver

Reply via email to