On 1/11/25 19:42, Krzysztof Kozlowski wrote:
> Use dev_err_probe() to make error code handling simpler and handle
> deferred probe.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org>
> ---
> drivers/remoteproc/st_remoteproc.c | 44
> +++++++++++++++++---------------------
> 1 file changed, 20 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/remoteproc/st_remoteproc.c
> b/drivers/remoteproc/st_remoteproc.c
> index
> 5df99bae7131a832c0c03c9bf8619812d9eb570d..d1f35e8a83ba525613ed4e54d2269b7e9f427e46
> 100644
> --- a/drivers/remoteproc/st_remoteproc.c
> +++ b/drivers/remoteproc/st_remoteproc.c
> @@ -290,26 +290,23 @@ static int st_rproc_parse_dt(struct platform_device
> *pdev)
> if (ddata->config->sw_reset) {
> ddata->sw_reset = devm_reset_control_get_exclusive(dev,
> "sw_reset");
> - if (IS_ERR(ddata->sw_reset)) {
> - dev_err(dev, "Failed to get S/W Reset\n");
> - return PTR_ERR(ddata->sw_reset);
> - }
> + if (IS_ERR(ddata->sw_reset))
> + return dev_err_probe(dev, PTR_ERR(ddata->sw_reset),
> + "Failed to get S/W Reset\n");
> }
>
> if (ddata->config->pwr_reset) {
> ddata->pwr_reset = devm_reset_control_get_exclusive(dev,
>
> "pwr_reset");
> - if (IS_ERR(ddata->pwr_reset)) {
> - dev_err(dev, "Failed to get Power Reset\n");
> - return PTR_ERR(ddata->pwr_reset);
> - }
> + if (IS_ERR(ddata->pwr_reset))
> + return dev_err_probe(dev, PTR_ERR(ddata->pwr_reset),
> + "Failed to get Power Reset\n");
> }
>
> ddata->clk = devm_clk_get(dev, NULL);
> - if (IS_ERR(ddata->clk)) {
> - dev_err(dev, "Failed to get clock\n");
> - return PTR_ERR(ddata->clk);
> - }
> + if (IS_ERR(ddata->clk))
> + return dev_err_probe(dev, PTR_ERR(ddata->clk),
> + "Failed to get clock\n");
>
> err = of_property_read_u32(np, "clock-frequency", &ddata->clk_rate);
> if (err) {
> @@ -318,10 +315,9 @@ static int st_rproc_parse_dt(struct platform_device
> *pdev)
> }
>
> ddata->boot_base = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> - if (IS_ERR(ddata->boot_base)) {
> - dev_err(dev, "Boot base not found\n");
> - return PTR_ERR(ddata->boot_base);
> - }
> + if (IS_ERR(ddata->boot_base))
> + return dev_err_probe(dev, PTR_ERR(ddata->boot_base),
> + "Boot base not found\n");
>
> err = of_property_read_u32_index(np, "st,syscfg", 1,
> &ddata->boot_offset);
> @@ -395,32 +391,32 @@ static int st_rproc_probe(struct platform_device *pdev)
> */
> chan = mbox_request_channel_byname(&ddata->mbox_client_vq0,
> "vq0_rx");
> if (IS_ERR(chan)) {
> - dev_err(&rproc->dev, "failed to request mbox chan 0\n");
> - ret = PTR_ERR(chan);
> + ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> + "failed to request mbox chan 0\n");
> goto free_clk;
> }
> ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_RX] = chan;
>
> chan = mbox_request_channel_byname(&ddata->mbox_client_vq0,
> "vq0_tx");
> if (IS_ERR(chan)) {
> - dev_err(&rproc->dev, "failed to request mbox chan 0\n");
> - ret = PTR_ERR(chan);
> + ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> + "failed to request mbox chan 0\n");
> goto free_mbox;
> }
> ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_TX] = chan;
>
> chan = mbox_request_channel_byname(&ddata->mbox_client_vq1,
> "vq1_rx");
> if (IS_ERR(chan)) {
> - dev_err(&rproc->dev, "failed to request mbox chan 1\n");
> - ret = PTR_ERR(chan);
> + ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> + "failed to request mbox chan 1\n");
> goto free_mbox;
> }
> ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_RX] = chan;
>
> chan = mbox_request_channel_byname(&ddata->mbox_client_vq1,
> "vq1_tx");
> if (IS_ERR(chan)) {
> - dev_err(&rproc->dev, "failed to request mbox chan 1\n");
> - ret = PTR_ERR(chan);
> + ret = dev_err_probe(&rproc->dev, PTR_ERR(chan),
> + "failed to request mbox chan 1\n");
> goto free_mbox;
> }
> ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_TX] = chan;
>
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Thanks
Patrice
