Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <ker...@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghi...@menlosecurity.com>
Cc: David S. Miller <da...@davemloft.net>
Cc: David Ahern <dsah...@gmail.com>
Cc: Eric Dumazet <eduma...@google.com>
Cc: Jakub Kicinski <k...@kernel.org>
Cc: Paolo Abeni <pab...@redhat.com>
Cc: Shuah Khan <sh...@kernel.org>
Cc: Ido Schimmel <ido...@idosch.org>
Cc: Kuniyuki Iwashima <kun...@amazon.com>
Cc: Simon Horman <ho...@kernel.org>
Cc: net...@vger.kernel.org
Cc: linux-kselft...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
v5 -> v6:
* Adjust the comment line lengths in the test script to a maximum of
80 characters
* Change memory allocation in inet6_rt_notify from gfp_any() to
GFP_ATOMIC for
atomic allocation in non-blocking contexts, as suggested by Ido
Schimmel
* NOTE: I have executed the test script on both bare-metal servers and
virtualized environments such as QEMU and vng. In the case of
bare-metal, it
consistently triggers a soft lockup in under a minute on unpatched
kernels.
For the virtualized environments, an unpatched kernel compiled with
the
Ubuntu 24.04 configuration also triggers a soft lockup, though it
takes
longer; however, it did not trigger a soft lockup on kernels compiled
with
configurations provided in:
https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style
leading to potential false negatives in the test results.
I am curious if this test can be executed on a bare-metal machine
within a
CI system, if such a setup exists, rather than in a virtualized
environment.
If that’s not possible, how can I apply a different kernel
configuration,
such as the one used in Ubuntu 24.04, for this test? Please advise.
v4 -> v5:
* Addressed review comments from Paolo Abeni.
* Added additional clarifying comments in the test script.
* Minor cleanup performed in the test script.
v3 -> v4:
* Added RCU primitives to rt6_fill_node(). I found that this function
is typically
called either with a table lock held or within
rcu_read_lock/rcu_read_unlock
pairs, except in the following call chain, where the protection is
unclear:
rt_fill_node()
fib6_info_hw_flags_set()
mlxsw_sp_fib6_offload_failed_flag_set()
mlxsw_sp_router_fib6_event_work()
The last function is initialized as a work item in
mlxsw_sp_router_fib_event()
and scheduled for deferred execution. I am unsure if the execution
context of
this work item is protected by any table lock or
rcu_read_lock/rcu_read_unlock
pair, so I have added the protection. Please let me know if this is
redundant.
* Other review comments addressed
v2 -> v3:
* Removed redundant rcu_read_lock()/rcu_read_unlock() pairs
* Revised the test script based on Ido Schimmel's feedback
* Updated the test script to ensure compatibility with the latest
iperf3 version
* Fixed new warnings generated with 'C=2' in the previous version
* Other review comments addressed
v1 -> v2:
* list_del_rcu() is applied exclusively to legacy multipath code
* All occurrences of fib6_siblings have been modified to utilize RCU
APIs for annotation and usage.
* Additionally, a test script for reproducing the reported
issue is included
---
net/ipv6/ip6_fib.c | 8 +-
net/ipv6/route.c | 45 ++-
tools/testing/selftests/net/Makefile | 1 +
.../net/ipv6_route_update_soft_lockup.sh | 262 ++++++++++++++++++
4 files changed, 297 insertions(+), 19 deletions(-)
create mode 100755 tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index eb111d20615c..9a1c59275a10 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1190,8 +1190,8 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct
fib6_info *rt,
while (sibling) {
if (sibling->fib6_metric == rt->fib6_metric &&
rt6_qualify_for_ecmp(sibling)) {
- list_add_tail(&rt->fib6_siblings,
- &sibling->fib6_siblings);
+ list_add_tail_rcu(&rt->fib6_siblings,
+ &sibling->fib6_siblings);
break;
}
sibling = rcu_dereference_protected(sibling->fib6_next,
@@ -1252,7 +1252,7 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct
fib6_info *rt,
fib6_siblings)
sibling->fib6_nsiblings--;
rt->fib6_nsiblings = 0;
- list_del_init(&rt->fib6_siblings);
+ list_del_rcu(&rt->fib6_siblings);
rt6_multipath_rebalance(next_sibling);
return err;
}
@@ -1970,7 +1970,7 @@ static void fib6_del_route(struct fib6_table *table,
struct fib6_node *fn,
&rt->fib6_siblings, fib6_siblings)
sibling->fib6_nsiblings--;
rt->fib6_nsiblings = 0;
- list_del_init(&rt->fib6_siblings);
+ list_del_rcu(&rt->fib6_siblings);
rt6_multipath_rebalance(next_sibling);
}
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index b4251915585f..b9b986bda943 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -413,8 +413,8 @@ void fib6_select_path(const struct net *net, struct
fib6_result *res,
struct flowi6 *fl6, int oif, bool have_oif_match,
const struct sk_buff *skb, int strict)
{
- struct fib6_info *sibling, *next_sibling;
struct fib6_info *match = res->f6i;
+ struct fib6_info *sibling;
if (!match->nh && (!match->fib6_nsiblings || have_oif_match))
goto out;
@@ -440,8 +440,8 @@ void fib6_select_path(const struct net *net, struct
fib6_result *res,
if (fl6->mp_hash <= atomic_read(&match->fib6_nh->fib_nh_upper_bound))
goto out;
- list_for_each_entry_safe(sibling, next_sibling, &match->fib6_siblings,
- fib6_siblings) {
+ list_for_each_entry_rcu(sibling, &match->fib6_siblings,
+ fib6_siblings) {
const struct fib6_nh *nh = sibling->fib6_nh;
int nh_upper_bound;
@@ -5195,14 +5195,18 @@ static void ip6_route_mpath_notify(struct fib6_info *rt,
* nexthop. Since sibling routes are always added at the end of
* the list, find the first sibling of the last route appended
*/
+ rcu_read_lock();
+
if ((nlflags & NLM_F_APPEND) && rt_last && rt_last->fib6_nsiblings) {
- rt = list_first_entry(&rt_last->fib6_siblings,
- struct fib6_info,
- fib6_siblings);
+ rt = list_first_or_null_rcu(&rt_last->fib6_siblings,
+ struct fib6_info,
+ fib6_siblings);
}
if (rt)
inet6_rt_notify(RTM_NEWROUTE, rt, info, nlflags);
+
+ rcu_read_unlock();
}
static bool ip6_route_mpath_should_notify(const struct fib6_info *rt)
@@ -5547,17 +5551,21 @@ static size_t rt6_nlmsg_size(struct fib6_info *f6i)
nexthop_for_each_fib6_nh(f6i->nh, rt6_nh_nlmsg_size,
&nexthop_len);
} else {
- struct fib6_info *sibling, *next_sibling;
struct fib6_nh *nh = f6i->fib6_nh;
+ struct fib6_info *sibling;
nexthop_len = 0;
if (f6i->fib6_nsiblings) {
rt6_nh_nlmsg_size(nh, &nexthop_len);
- list_for_each_entry_safe(sibling, next_sibling,
- &f6i->fib6_siblings,
fib6_siblings) {
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
+ fib6_siblings) {
rt6_nh_nlmsg_size(sibling->fib6_nh,
&nexthop_len);
}
+
+ rcu_read_unlock();
}
nexthop_len += lwtunnel_get_encap_size(nh->fib_nh_lws);
}
@@ -5721,7 +5729,7 @@ static int rt6_fill_node(struct net *net, struct sk_buff
*skb,
lwtunnel_fill_encap(skb, dst->lwtstate, RTA_ENCAP,
RTA_ENCAP_TYPE) < 0)
goto nla_put_failure;
} else if (rt->fib6_nsiblings) {
- struct fib6_info *sibling, *next_sibling;
+ struct fib6_info *sibling;
struct nlattr *mp;
mp = nla_nest_start_noflag(skb, RTA_MULTIPATH);
@@ -5733,14 +5741,21 @@ static int rt6_fill_node(struct net *net, struct
sk_buff *skb,
0) < 0)
goto nla_put_failure;
- list_for_each_entry_safe(sibling, next_sibling,
- &rt->fib6_siblings, fib6_siblings) {
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(sibling, &rt->fib6_siblings,
+ fib6_siblings) {
if (fib_add_nexthop(skb, &sibling->fib6_nh->nh_common,
sibling->fib6_nh->fib_nh_weight,
- AF_INET6, 0) < 0)
+ AF_INET6, 0) < 0) {
+ rcu_read_unlock();
+
goto nla_put_failure;
+ }
}
+ rcu_read_unlock();
+
nla_nest_end(skb, mp);
} else if (rt->nh) {
if (nla_put_u32(skb, RTA_NH_ID, rt->nh->id))
@@ -6177,7 +6192,7 @@ void inet6_rt_notify(int event, struct fib6_info *rt,
struct nl_info *info,
err = -ENOBUFS;
seq = info->nlh ? info->nlh->nlmsg_seq : 0;
- skb = nlmsg_new(rt6_nlmsg_size(rt), gfp_any());
+ skb = nlmsg_new(rt6_nlmsg_size(rt), GFP_ATOMIC);
if (!skb)
goto errout;
@@ -6190,7 +6205,7 @@ void inet6_rt_notify(int event, struct fib6_info *rt,
struct nl_info *info,
goto errout;
}
rtnl_notify(skb, net, info->portid, RTNLGRP_IPV6_ROUTE,
- info->nlh, gfp_any());
+ info->nlh, GFP_ATOMIC);
return;
errout:
rtnl_set_sk_err(net, RTNLGRP_IPV6_ROUTE, err);
diff --git a/tools/testing/selftests/net/Makefile
b/tools/testing/selftests/net/Makefile
index 649f1fe0dc46..88cbac27aa10 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -96,6 +96,7 @@ TEST_PROGS += fdb_flush.sh
TEST_PROGS += fq_band_pktlimit.sh
TEST_PROGS += vlan_hw_filter.sh
TEST_PROGS += bpf_offload.py
+TEST_PROGS += ipv6_route_update_soft_lockup.sh
# YNL files, must be before "include ..lib.mk"
EXTRA_CLEAN += $(OUTPUT)/libynl.a
diff --git a/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh
b/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh
new file mode 100755
index 000000000000..c61a7a8352cf
--- /dev/null
+++ b/tools/testing/selftests/net/ipv6_route_update_soft_lockup.sh
@@ -0,0 +1,262 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Testing for potential kernel soft lockup during IPv6 routing table
+# refresh under heavy outgoing IPv6 traffic. If a kernel soft lockup
+# occurs, a kernel panic will be triggered to prevent associated issues.
+#
+#
+# Test Environment Layout
+#
+# ┌----------------┐ ┌----------------┐
+# | SOURCE_NS | | SINK_NS |
+# | NAMESPACE | | NAMESPACE |
+# |(iperf3 clients)| |(iperf3 servers)|
+# | | | |
+# | | | |
+# | ┌-----------| nexthops |---------┐ |
+# | |veth_source|<--------------------------------------->|veth_sink|<┐ |
+# | └-----------|2001:0DB8:1::0:1/96 2001:0DB8:1::1:1/96 |---------┘ | |
+# | | ^ 2001:0DB8:1::1:2/96 | | |
+# | | . . | fwd | |
+# | ┌---------┐ | . . | | |
+# | | IPv6 | | . . | V |
+# | | routing | | . 2001:0DB8:1::1:80/96| ┌-----┐ |
+# | | table | | . | | lo | |
+# | | nexthop | | . └--------┴-----┴-┘
+# | | update | | ............................> 2001:0DB8:2::1:1/128
+# | └-------- ┘ |
+# └----------------┘
+#
+# The test script sets up two network namespaces, source_ns and sink_ns,
+# connected via a veth link. Within source_ns, it continuously updates the
+# IPv6 routing table by flushing and inserting IPV6_NEXTHOP_ADDR_COUNT nexthop
+# IPs destined for SINK_LOOPBACK_IP_ADDR in sink_ns. This refresh occurs at a
+# rate of 1/ROUTING_TABLE_REFRESH_PERIOD per second for TEST_DURATION seconds.
+#
+# Simultaneously, multiple iperf3 clients within source_ns generate heavy
+# outgoing IPv6 traffic. Each client is assigned a unique port number starting
+# at 5000 and incrementing sequentially. Each client targets a unique iperf3
+# server running in sink_ns, connected to the SINK_LOOPBACK_IFACE interface
+# using the same port number.
+#
+# The number of iperf3 servers and clients is set to half of the total
+# available cores on each machine.
+#
+# NOTE: We have tested this script on machines with various CPU specifications,
+# ranging from lower to higher performance as listed below. The test script
+# effectively triggered a kernel soft lockup on machines running an unpatched
+# kernel in under a minute:
+#
+# - 1x Intel Xeon E-2278G 8-Core Processor @ 3.40GHz
+# - 1x Intel Xeon E-2378G Processor 8-Core @ 2.80GHz
+# - 1x AMD EPYC 7401P 24-Core Processor @ 2.00GHz
+# - 1x AMD EPYC 7402P 24-Core Processor @ 2.80GHz
+# - 2x Intel Xeon Gold 5120 14-Core Processor @ 2.20GHz
+# - 1x Ampere Altra Q80-30 80-Core Processor @ 3.00GHz
+# - 2x Intel Xeon Gold 5120 14-Core Processor @ 2.20GHz
+# - 2x Intel Xeon Silver 4214 24-Core Processor @ 2.20GHz
+# - 1x AMD EPYC 7502P 32-Core @ 2.50GHz
+# - 1x Intel Xeon Gold 6314U 32-Core Processor @ 2.30GHz
+# - 2x Intel Xeon Gold 6338 32-Core Processor @ 2.00GHz
+#
+# On less performant machines, you may need to increase the TEST_DURATION
+# parameter to enhance the likelihood of encountering a race condition leading
+# to a kernel soft lockup and avoid a false negative result.
+#
+# NOTE: The test may not produce the expected result in virtualized
+# environments (e.g., qemu) due to differences in timing and CPU handling,
+# which can affect the conditions needed to trigger a soft lockup.
+
+source lib.sh
+source net_helper.sh
+
+TEST_DURATION=300
+ROUTING_TABLE_REFRESH_PERIOD=0.01
+
+IPERF3_BITRATE="300m"
+
+
+IPV6_NEXTHOP_ADDR_COUNT="128"
+IPV6_NEXTHOP_ADDR_MASK="96"
+IPV6_NEXTHOP_PREFIX="2001:0DB8:1"
+
+
+SOURCE_TEST_IFACE="veth_source"
+SOURCE_TEST_IP_ADDR="2001:0DB8:1::0:1/96"
+
+SINK_TEST_IFACE="veth_sink"
+# ${SINK_TEST_IFACE} is populated with the following range of IPv6 addresses:
+# 2001:0DB8:1::1:1 to 2001:0DB8:1::1:${IPV6_NEXTHOP_ADDR_COUNT}
+SINK_LOOPBACK_IFACE="lo"
+SINK_LOOPBACK_IP_MASK="128"
+SINK_LOOPBACK_IP_ADDR="2001:0DB8:2::1:1"
+
+nexthop_ip_list=""
+termination_signal=""
+kernel_softlokup_panic_prev_val=""
+
+terminate_ns_processes_by_pattern() {
+ local ns=$1
+ local pattern=$2
+
+ for pid in $(ip netns pids ${ns}); do
+ [ -e /proc/$pid/cmdline ] && grep -qe "${pattern}"
/proc/$pid/cmdline && kill -9 $pid
+ done
+}
+
+cleanup() {
+ echo "info: cleaning up namespaces and terminating all processes within
them..."
+
+
+ # Terminate iperf3 instances running in the source_ns. To avoid race
+ # conditions, first iterate over the PIDs and terminate those
+ # associated with the bash shells running the
+ # `while true; do iperf3 -c ...; done` loops. In a second iteration,
+ # terminate the individual `iperf3 -c ...` instances.
+ terminate_ns_processes_by_pattern ${source_ns} while
+ terminate_ns_processes_by_pattern ${source_ns} iperf3
+
+ # Repeat the same process for sink_ns
+ terminate_ns_processes_by_pattern ${sink_ns} while
+ terminate_ns_processes_by_pattern ${sink_ns} iperf3
+
+ # Check if any iperf3 instances are still running. This could happen
+ # if a core has entered an infinite loop and the timeout for detecting
+ # the soft lockup has not expired, but either the test interval has
+ # already elapsed or the test was terminated manually (e.g., with ^C)
+ for pid in $(ip netns pids ${source_ns}); do
+ if [ -e /proc/$pid/cmdline ] && grep -qe 'iperf3'
/proc/$pid/cmdline; then
+ echo "FAIL: unable to terminate some iperf3 instances.
Soft lockup is underway. A kernel panic is on the way!"
+ exit ${ksft_fail}
+ fi
+ done
+
+ if [ "$termination_signal" == "SIGINT" ]; then
+ echo "SKIP: Termination due to ^C (SIGINT)"
+ elif [ "$termination_signal" == "SIGALRM" ]; then
+ echo "PASS: No kernel soft lockup occurred during this
${TEST_DURATION} second test"
+ fi
+
+ cleanup_ns ${source_ns} ${sink_ns}
+
+ sysctl -qw kernel.softlockup_panic=${kernel_softlokup_panic_prev_val}
+}
+
+setup_prepare() {
+ setup_ns source_ns sink_ns
+
+ ip -n ${source_ns} link add name ${SOURCE_TEST_IFACE} type veth peer
name ${SINK_TEST_IFACE} netns ${sink_ns}
+
+ # Setting up the Source namespace
+ ip -n ${source_ns} addr add ${SOURCE_TEST_IP_ADDR} dev
${SOURCE_TEST_IFACE}
+ ip -n ${source_ns} link set dev ${SOURCE_TEST_IFACE} qlen 10000
+ ip -n ${source_ns} link set dev ${SOURCE_TEST_IFACE} up
+ ip netns exec ${source_ns} sysctl -qw
net.ipv6.fib_multipath_hash_policy=1
+
+ # Setting up the Sink namespace
+ ip -n ${sink_ns} addr add
${SINK_LOOPBACK_IP_ADDR}/${SINK_LOOPBACK_IP_MASK} dev ${SINK_LOOPBACK_IFACE}
+ ip -n ${sink_ns} link set dev ${SINK_LOOPBACK_IFACE} up
+ ip netns exec ${sink_ns} sysctl -qw
net.ipv6.conf.${SINK_LOOPBACK_IFACE}.forwarding=1
+
+ ip -n ${sink_ns} link set ${SINK_TEST_IFACE} up
+ ip netns exec ${sink_ns} sysctl -qw
net.ipv6.conf.${SINK_TEST_IFACE}.forwarding=1
+
+
+ # Populate nexthop IPv6 addresses on the test interface in the sink_ns
+ echo "info: populating ${IPV6_NEXTHOP_ADDR_COUNT} IPv6 addresses on the
${SINK_TEST_IFACE} interface ..."
+ for IP in $(seq 1 ${IPV6_NEXTHOP_ADDR_COUNT}); do
+ ip -n ${sink_ns} addr add ${IPV6_NEXTHOP_PREFIX}::$(printf
"1:%x" "${IP}")/${IPV6_NEXTHOP_ADDR_MASK} dev ${SINK_TEST_IFACE};
+ done
+
+ # Preparing list of nexthops
+ for IP in $(seq 1 ${IPV6_NEXTHOP_ADDR_COUNT}); do
+ nexthop_ip_list=$nexthop_ip_list" nexthop via
${IPV6_NEXTHOP_PREFIX}::$(printf "1:%x" $IP) dev ${SOURCE_TEST_IFACE} weight 1"
+ done
+}
+
+
+test_soft_lockup_during_routing_table_refresh() {
+ # Start num_of_iperf_servers iperf3 servers in the sink_ns namespace,
+ # each listening on ports starting at 5001 and incrementing
+ # sequentially. Since iperf3 instances may terminate unexpectedly, a
+ # while loop is used to automatically restart them in such cases.
+ echo "info: starting ${num_of_iperf_servers} iperf3 servers in the
sink_ns namespace ..."
+ for i in $(seq 1 ${num_of_iperf_servers}); do
+ cmd="iperf3 --bind ${SINK_LOOPBACK_IP_ADDR} -s -p $(printf
'5%03d' ${i}) --rcv-timeout 200 &>/dev/null"
+ ip netns exec ${sink_ns} bash -c "while true; do ${cmd}; done
&" &>/dev/null
+ done
+
+ # Wait for the iperf3 servers to be ready
+ for i in $(seq ${num_of_iperf_servers}); do
+ port=$(printf '5%03d' ${i});
+ wait_local_port_listen ${sink_ns} ${port} tcp
+ done
+
+ # Continuously refresh the routing table in the background within
+ # the source_ns namespace
+ ip netns exec ${source_ns} bash -c "
+ while \$(ip netns list | grep -q ${source_ns}); do
+ ip -6 route add
${SINK_LOOPBACK_IP_ADDR}/${SINK_LOOPBACK_IP_MASK} ${nexthop_ip_list};
+ sleep ${ROUTING_TABLE_REFRESH_PERIOD};
+ ip -6 route delete
${SINK_LOOPBACK_IP_ADDR}/${SINK_LOOPBACK_IP_MASK};
+ done &"
+
+ # Start num_of_iperf_servers iperf3 clients in the source_ns namespace,
+ # each sending TCP traffic on sequential ports starting at 5001.
+ # Since iperf3 instances may terminate unexpectedly (e.g., if the route
+ # to the server is deleted in the background during a route refresh), a
+ # while loop is used to automatically restart them in such cases.
+ echo "info: starting ${num_of_iperf_servers} iperf3 clients in the
source_ns namespace ..."
+ for i in $(seq 1 ${num_of_iperf_servers}); do
+ cmd="iperf3 -c ${SINK_LOOPBACK_IP_ADDR} -p $(printf '5%03d'
${i}) --length 64 --bitrate ${IPERF3_BITRATE} -t 0 --connect-timeout 150
&>/dev/null"
+ ip netns exec ${source_ns} bash -c "while true; do ${cmd}; done
&" &>/dev/null
+ done
+
+ echo "info: IPv6 routing table is being updated at the rate of $(echo
"1/${ROUTING_TABLE_REFRESH_PERIOD}" | bc)/s for ${TEST_DURATION} seconds ..."
+ echo "info: A kernel soft lockup, if detected, results in a kernel
panic!"
+
+ wait
+}
+
+# Make sure 'iperf3' is installed, skip the test otherwise
+if [ ! -x "$(command -v "iperf3")" ]; then
+ echo "SKIP: 'iperf3' is not installed. Skipping the test."
+ exit ${ksft_skip}
+fi
+
+# Determine the number of cores on the machine
+num_of_iperf_servers=$(( $(nproc)/2 ))
+
+# Check if we are running on a multi-core machine, skip the test otherwise
+if [ "${num_of_iperf_servers}" -eq 0 ]; then
+ echo "SKIP: This test is not valid on a single core machine!"
+ exit ${ksft_skip}
+fi
+
+# Since the kernel soft lockup we're testing causes at least one core to enter
+# an infinite loop, destabilizing the host and likely affecting subsequent
+# tests, we trigger a kernel panic instead of reporting a failure and
+# continuing
+kernel_softlokup_panic_prev_val=$(sysctl -n kernel.softlockup_panic)
+sysctl -qw kernel.softlockup_panic=1
+
+handle_sigint() {
+ termination_signal="SIGINT"
+ cleanup
+ exit ${ksft_skip}
+}
+
+handle_sigalrm() {
+ termination_signal="SIGALRM"
+ cleanup
+ exit ${ksft_pass}
+}
+
+trap handle_sigint SIGINT
+trap handle_sigalrm SIGALRM
+
+(sleep ${TEST_DURATION} && kill -s SIGALRM $$)&
+
+setup_prepare
+test_soft_lockup_during_routing_table_refresh
--
2.43.0
