On 7/4/24 17:32, Mathieu Poirier wrote:
> On Thu, Jul 04, 2024 at 10:05:24AM +0200, Arnaud POULIQUEN wrote:
>>
>>
>> On 7/3/24 17:14, Mathieu Poirier wrote:
>>> On Wed, Jul 03, 2024 at 09:19:44AM +0200, Arnaud POULIQUEN wrote:
>>>> Hello Mathieu
>>>>
>>>> On 7/2/24 18:44, Mathieu Poirier wrote:
>>>>> Good morning,
>>>>>
>>>>> On Fri, Jun 21, 2024 at 04:37:56PM +0200, Arnaud Pouliquen wrote:
>>>>>> Add a remoteproc TEE (Trusted Execution Environment) driver
>>>>>> that will be probed by the TEE bus. If the associated Trusted
>>>>>> application is supported on secure part this driver offers a client
>>>>>> interface to load a firmware by the secure part.
>>>>>> This firmware could be authenticated by the secure trusted application.
>>>>>>
>>>>>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliq...@foss.st.com>
>>>>>> ---
>>>>>> Updates vs previous version:
>>>>>> - rename tee_remoteproc.* file to rmeoteproc_tee.*,
>>>>>> - rename TEE_REMOTEPROC config to REMOTEPROC_TEE,
>>>>>> - remove "stm32" in some variable declarations,
>>>>>> - remove useless "remoteproc_internal.h" include,
>>>>>> - fix tee_rproc_ctx devm_kzalloc.
>>>>>> - rework module description
>>>>>> ---
>>>>>> drivers/remoteproc/Kconfig | 10 +
>>>>>> drivers/remoteproc/Makefile | 1 +
>>>>>> drivers/remoteproc/remoteproc_tee.c | 446 ++++++++++++++++++++++++++++
>>>>>> include/linux/remoteproc.h | 4 +
>>>>>> include/linux/remoteproc_tee.h | 100 +++++++
>>>>>> 5 files changed, 561 insertions(+)
>>>>>> create mode 100644 drivers/remoteproc/remoteproc_tee.c
>>>>>> create mode 100644 include/linux/remoteproc_tee.h
>>>>>>
>>>>>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>>>>>> index 48845dc8fa85..278f197acb90 100644
>>>>>> --- a/drivers/remoteproc/Kconfig
>>>>>> +++ b/drivers/remoteproc/Kconfig
>>>>>> @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC
>>>>>>
>>>>>> It's safe to say N if not interested in using RPU r5f cores.
>>>>>>
>>>>>> +
>>>>>> +config REMOTEPROC_TEE
>>>>>> + tristate "Remoteproc support by a TEE application"
>>>>>> + depends on OPTEE
>>>>>> + help
>>>>>> + Support a remote processor with a TEE application. The Trusted
>>>>>> + Execution Context is responsible for loading the trusted
>>>>>> firmware
>>>>>> + image and managing the remote processor's lifecycle.
>>>>>> + This can be either built-in or a loadable module.
>>>>>> +
>>>>>> endif # REMOTEPROC
>>>>>>
>>>>>> endmenu
>>>>>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
>>>>>> index 91314a9b43ce..b4eb37177005 100644
>>>>>> --- a/drivers/remoteproc/Makefile
>>>>>> +++ b/drivers/remoteproc/Makefile
>>>>>> @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o
>>>>>> obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
>>>>>> obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
>>>>>> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
>>>>>> +obj-$(CONFIG_REMOTEPROC_TEE) += remoteproc_tee.o
>>>>>> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o
>>>>>> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o
>>>>>> obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o
>>>>>> diff --git a/drivers/remoteproc/remoteproc_tee.c
>>>>>> b/drivers/remoteproc/remoteproc_tee.c
>>>>>> new file mode 100644
>>>>>> index 000000000000..70cb67451767
>>>>>> --- /dev/null
>>>>>> +++ b/drivers/remoteproc/remoteproc_tee.c
>>>>>> @@ -0,0 +1,446 @@
>>>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>>>> +/*
>>>>>> + * Copyright (C) STMicroelectronics 2024
>>>>>> + * Author: Arnaud Pouliquen <arnaud.pouliq...@foss.st.com>
>>>>>> + */
>>>>>> +
>>>>>> +#include <linux/firmware.h>
>>>>>> +#include <linux/io.h>
>>>>>> +#include <linux/module.h>
>>>>>> +#include <linux/remoteproc.h>
>>>>>> +#include <linux/remoteproc_tee.h>
>>>>>> +#include <linux/slab.h>
>>>>>> +#include <linux/tee_drv.h>
>>>>>> +
>>>>>> +#define MAX_TEE_PARAM_ARRY_MEMBER 4
>>>>>> +
>>>>>> +/*
>>>>>> + * Authentication of the firmware and load in the remote processor
>>>>>> memory
>>>>>> + *
>>>>>> + * [in] params[0].value.a: unique 32bit identifier of the remote
>>>>>> processor
>>>>>> + * [in] params[1].memref: buffer containing the image of the
>>>>>> buffer
>>>>>> + */
>>>>>> +#define TA_RPROC_FW_CMD_LOAD_FW 1
>>>>>> +
>>>>>> +/*
>>>>>> + * Start the remote processor
>>>>>> + *
>>>>>> + * [in] params[0].value.a: unique 32bit identifier of the remote
>>>>>> processor
>>>>>> + */
>>>>>> +#define TA_RPROC_FW_CMD_START_FW 2
>>>>>> +
>>>>>> +/*
>>>>>> + * Stop the remote processor
>>>>>> + *
>>>>>> + * [in] params[0].value.a: unique 32bit identifier of the remote
>>>>>> processor
>>>>>> + */
>>>>>> +#define TA_RPROC_FW_CMD_STOP_FW 3
>>>>>> +
>>>>>> +/*
>>>>>> + * Return the address of the resource table, or 0 if not found
>>>>>> + * No check is done to verify that the address returned is accessible by
>>>>>> + * the non secure context. If the resource table is loaded in a
>>>>>> protected
>>>>>> + * memory the access by the non secure context will lead to a data
>>>>>> abort.
>>>>>> + *
>>>>>> + * [in] params[0].value.a: unique 32bit identifier of the remote
>>>>>> processor
>>>>>> + * [out] params[1].value.a: 32bit LSB resource table memory address
>>>>>> + * [out] params[1].value.b: 32bit MSB resource table memory address
>>>>>> + * [out] params[2].value.a: 32bit LSB resource table memory size
>>>>>> + * [out] params[2].value.b: 32bit MSB resource table memory size
>>>>>> + */
>>>>>> +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4
>>>>>> +
>>>>>> +/*
>>>>>> + * Return the address of the core dump
>>>>>> + *
>>>>>> + * [in] params[0].value.a: unique 32bit identifier of the remote
>>>>>> processor
>>>>>> + * [out] params[1].memref: address of the core dump image if exist,
>>>>>> + * else return Null
>>>>>> + */
>>>>>> +#define TA_RPROC_FW_CMD_GET_COREDUMP 5
>>>>>> +
>>>>>> +struct tee_rproc_context {
>>>>>> + struct list_head sessions;
>>>>>> + struct tee_context *tee_ctx;
>>>>>> + struct device *dev;
>>>>>> +};
>>>>>> +
>>>>>> +static struct tee_rproc_context *tee_rproc_ctx;
>>>>>> +
>>>>>> +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd,
>>>>>> + struct tee_ioctl_invoke_arg *arg,
>>>>>> + struct tee_param *param,
>>>>>> + unsigned int num_params)
>>>>>> +{
>>>>>> + memset(arg, 0, sizeof(*arg));
>>>>>> + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param));
>>>>>> +
>>>>>> + arg->func = cmd;
>>>>>> + arg->session = trproc->session_id;
>>>>>> + arg->num_params = num_params + 1;
>>>>>> +
>>>>>> + param[0] = (struct tee_param) {
>>>>>> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
>>>>>> + .u.value.a = trproc->rproc_id,
>>>>>> + };
>>>>>> +}
>>>>>> +
>>>>>> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw)
>>>>>> +{
>>>>>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>>>>>> + struct tee_rproc *trproc = rproc->tee_interface;
>>>>>> + struct tee_ioctl_invoke_arg arg;
>>>>>> + struct tee_shm *fw_shm;
>>>>>> + int ret;
>>>>>> +
>>>>>> + if (!trproc)
>>>>>> + return -EINVAL;
>>>>>> +
>>>>>> + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx,
>>>>>> (void *)fw->data, fw->size);
>>>>>> + if (IS_ERR(fw_shm))
>>>>>> + return PTR_ERR(fw_shm);
>>>>>> +
>>>>>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg,
>>>>>> param, 1);
>>>>>> +
>>>>>> + /* Provide the address of the firmware image */
>>>>>> + param[1] = (struct tee_param) {
>>>>>> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT,
>>>>>> + .u.memref = {
>>>>>> + .shm = fw_shm,
>>>>>> + .size = fw->size,
>>>>>> + .shm_offs = 0,
>>>>>> + },
>>>>>> + };
>>>>>> +
>>>>>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg,
>>>>>> param);
>>>>>> + if (ret < 0 || arg.ret != 0) {
>>>>>> + dev_err(tee_rproc_ctx->dev,
>>>>>> + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err:
>>>>>> %x, ret:%x\n",
>>>>>> + arg.ret, ret);
>>>>>> + if (!ret)
>>>>>> + ret = -EIO;
>>>>>> + }
>>>>>> +
>>>>>> + tee_shm_free(fw_shm);
>>>>>> +
>>>>>> + return ret;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(tee_rproc_load_fw);
>>>>>> +
>>>>>> +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc,
>>>>>> phys_addr_t *rsc_pa,
>>>>>> + size_t *table_sz)
>>>>>> +{
>>>>>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>>>>>> + struct tee_rproc *trproc = rproc->tee_interface;
>>>>>> + struct tee_ioctl_invoke_arg arg;
>>>>>> + int ret;
>>>>>> +
>>>>>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE,
>>>>>> &arg, param, 2);
>>>>>> +
>>>>>> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
>>>>>> + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
>>>>>> +
>>>>>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg,
>>>>>> param);
>>>>>> + if (ret < 0 || arg.ret != 0) {
>>>>>> + dev_err(tee_rproc_ctx->dev,
>>>>>> + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed
>>>>>> TEE err: %x, ret:%x\n",
>>>>>> + arg.ret, ret);
>>>>>> + return -EIO;
>>>>>> + }
>>>>>> +
>>>>>> + *table_sz = param[2].u.value.a;
>>>>>> +
>>>>>> + if (*table_sz)
>>>>>> + *rsc_pa = param[1].u.value.a;
>>>>>> + else
>>>>>> + *rsc_pa = 0;
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
>>>>>> +{
>>>>>> + phys_addr_t rsc_table;
>>>>>> + void __iomem *rsc_va;
>>>>>> + size_t table_sz;
>>>>>> + int ret;
>>>>>> +
>>>>>> + ret = tee_rproc_load_fw(rproc, fw);
>>>>>> + if (ret)
>>>>>> + return ret;
>>>>>> +
>>>>>> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table,
>>>>>> &table_sz);
>>>>>> + if (ret)
>>>>>> + return ret;
>>>>>
>>>>> Do we need an API to unload the firware from memory too? If anything
>>>>> fails we
>>>>> still have firmware loaded into memory.
>>>>
>>>> For the time being, the clean-up of the memory is not implemented in
>>>> OP-TEE.
>>>
>>> In my opinion cleaning up the firmware image loaded to memory when something
>>> fails is important and should be part of this patchset. Looking at the
>>> error
>>> path in this function, it is clear something is missing.
>>
>>
>> Please, could you detail what risks you see in not implementing the memory
>> clean-up at this first step?
>>
>
> Almost everything in the Linux kernel is about allocation and release of
> resources, the pattern is ubiquitous. Reading function tee_rproc_parse_fw(),
> the firmware is loaded by tee_rproc_load_fw() but never released - people
> reading this driver will wonder about that. There is also the possibility
> that
> other implementations will use the free'd memory for other purposes. This
> interface driver is meant to be generic and as such needs to take care of
> those
> corner cases.
Thank you for the clarification.
If we want to support this, handling the error here would not be sufficient. For
instance, many things can go wrong in rproc_start().
So either we do nothing, as with the ELF support, and we put a comment in the
remoteproc tee; or we may need to introduce new rproc ops to clean up/free
resources in case of errors in the remoteproc core.
Or perhaps do you have another alternative to propose?
Thanks,
Arnaud
>
>> Currently, OP-TEE upstream does not clean the memory. Upon the next load, it
>> will either be overwritten or left unused by the newly authenticated
>> firmware.
>>
>> If your concern is about the ability to read the code, the code is already
>> accessible in the binary firmware image on the Linux filesystem.
>>
>> As a next step a platform-dependent strategy has to be implemented to enhance
>> firmware protection:
>> - Ensure the integrity of the code.
>> - Preserve secrets.
>>
>> However, OP-TEE cannot trust the Non-secure context for this. Expecting
>> Linux to
>> call a clean-up service does not seem reliable to me.
>>
>> In the downstream stm32mp platform, we have implemented the clean-up but
>> above
>> all, ensured that Linux never has access to the remote processor firmware
>> code
>> and data by using firewall configurations.
>> For time being we print a warning message on OP-TEE upstream[1]
>>
>> [1]https://elixir.bootlin.com/op-tee/latest/source/core/drivers/remoteproc/stm32_remoteproc.c#L361
>>
>>
>> Thanks,
>> Arnaud
>>
>>>
>>>> I plan to upstream this part in a second step, associated with a memory
>>>> protection
>>>> strategy. This should be directly implemented in the OP-TEE service to
>>>> avoid
>>>> reliance on Linux error management.
>>>> Nonetheless, an API could be added to clean the memory if needed.
>>>>
>>>> Thanks,
>>>> Arnaud
>>>>
>>>>>
>>>>> More comments to come later.
>>>>>
>>>>> Mathieu
>>>>>
>>>>>> +
>>>>>> + /*
>>>>>> + * We assume here that the memory mapping is the same between
>>>>>> the TEE and Linux kernel
>>>>>> + * contexts. Else a new TEE remoteproc service could be needed
>>>>>> to get a copy of the
>>>>>> + * resource table
>>>>>> + */
>>>>>> + rsc_va = ioremap_wc(rsc_table, table_sz);
>>>>>> + if (IS_ERR_OR_NULL(rsc_va)) {
>>>>>> + dev_err(tee_rproc_ctx->dev, "Unable to map memory
>>>>>> region: %pa+%zx\n",
>>>>>> + &rsc_table, table_sz);
>>>>>> + return -ENOMEM;
>>>>>> + }
>>>>>> +
>>>>>> + /*
>>>>>> + * Create a copy of the resource table to have the same
>>>>>> behavior as the elf loader.
>>>>>> + * This cached table will be used after the remoteproc stops to
>>>>>> free resources, and for
>>>>>> + * crash recovery to reapply the settings.
>>>>>> + */
>>>>>> + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz,
>>>>>> GFP_KERNEL);
>>>>>> + if (!rproc->cached_table) {
>>>>>> + ret = -ENOMEM;
>>>>>> + goto out;
>>>>>> + }
>>>>>> +
>>>>>> + rproc->table_ptr = rproc->cached_table;
>>>>>> + rproc->table_sz = table_sz;
>>>>>> +
>>>>>> +out:
>>>>>> + iounmap(rsc_va);
>>>>>> + return ret;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw);
>>>>>> +
>>>>>> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc
>>>>>> *rproc,
>>>>>> + const struct
>>>>>> firmware *fw)
>>>>>> +{
>>>>>> + struct tee_rproc *trproc = rproc->tee_interface;
>>>>>> + phys_addr_t rsc_table;
>>>>>> + size_t table_sz;
>>>>>> + int ret;
>>>>>> +
>>>>>> + if (!trproc)
>>>>>> + return ERR_PTR(-EINVAL);
>>>>>> +
>>>>>> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table,
>>>>>> &table_sz);
>>>>>> + if (ret)
>>>>>> + return ERR_PTR(ret);
>>>>>> +
>>>>>> + rproc->table_sz = table_sz;
>>>>>> + if (!table_sz)
>>>>>> + return NULL;
>>>>>> +
>>>>>> + /*
>>>>>> + * At this step the memory area that contains the resource
>>>>>> table should have be declared
>>>>>> + * in the remote proc platform driver and allocated by
>>>>>> rproc_alloc_registered_carveouts().
>>>>>> + */
>>>>>> + return (struct resource_table *)rproc_pa_to_va(rproc,
>>>>>> rsc_table, table_sz, NULL);
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table);
>>>>>> +
>>>>>> +int tee_rproc_start(struct rproc *rproc)
>>>>>> +{
>>>>>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>>>>>> + struct tee_rproc *trproc = rproc->tee_interface;
>>>>>> + struct tee_ioctl_invoke_arg arg;
>>>>>> + int ret = 0;
>>>>>> +
>>>>>> + if (!trproc)
>>>>>> + return -EINVAL;
>>>>>> +
>>>>>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg,
>>>>>> param, 0);
>>>>>> +
>>>>>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg,
>>>>>> param);
>>>>>> + if (ret < 0 || arg.ret != 0) {
>>>>>> + dev_err(tee_rproc_ctx->dev,
>>>>>> + "TA_RPROC_FW_CMD_START_FW invoke failed TEE
>>>>>> err: %x, ret:%x\n",
>>>>>> + arg.ret, ret);
>>>>>> + if (!ret)
>>>>>> + return -EIO;
>>>>>> + }
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(tee_rproc_start);
>>>>>> +
>>>>>> +int tee_rproc_stop(struct rproc *rproc)
>>>>>> +{
>>>>>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>>>>>> + struct tee_rproc *trproc = rproc->tee_interface;
>>>>>> + struct tee_ioctl_invoke_arg arg;
>>>>>> + int ret;
>>>>>> +
>>>>>> + if (!trproc)
>>>>>> + return -EINVAL;
>>>>>> +
>>>>>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg,
>>>>>> param, 0);
>>>>>> +
>>>>>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg,
>>>>>> param);
>>>>>> + if (ret < 0 || arg.ret != 0) {
>>>>>> + dev_err(tee_rproc_ctx->dev,
>>>>>> + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err:
>>>>>> %x, ret:%x\n",
>>>>>> + arg.ret, ret);
>>>>>> + if (!ret)
>>>>>> + ret = -EIO;
>>>>>> + }
>>>>>> +
>>>>>> + return ret;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(tee_rproc_stop);
>>>>>> +
>>>>>> +static const struct tee_client_device_id tee_rproc_id_table[] = {
>>>>>> + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905, 0x82, 0x85, 0x14, 0x86,
>>>>>> 0xa9, 0x77, 0x1a, 0x08)},
>>>>>> + {}
>>>>>> +};
>>>>>> +
>>>>>> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc
>>>>>> *rproc, unsigned int rproc_id)
>>>>>> +{
>>>>>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>>>>>> + struct tee_ioctl_open_session_arg sess_arg;
>>>>>> + struct tee_client_device *tee_device;
>>>>>> + struct tee_rproc *trproc, *p_err;
>>>>>> + int ret;
>>>>>> +
>>>>>> + /*
>>>>>> + * Test if the device has been probed by the TEE bus. In case
>>>>>> of failure, we ignore the
>>>>>> + * reason. The bus could be not yet probed or the service not
>>>>>> available in the secure
>>>>>> + * firmware.The assumption in such a case is that the TEE
>>>>>> remoteproc is not probed.
>>>>>> + */
>>>>>> + if (!tee_rproc_ctx)
>>>>>> + return ERR_PTR(-EPROBE_DEFER);
>>>>>> +
>>>>>> + /* Prevent tee rproc module from being removed */
>>>>>> + if (!try_module_get(THIS_MODULE)) {
>>>>>> + dev_err(tee_rproc_ctx->dev, "can't get owner\n");
>>>>>> + return ERR_PTR(-ENODEV);
>>>>>> + }
>>>>>> +
>>>>>> + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL);
>>>>>> + if (!trproc) {
>>>>>> + p_err = ERR_PTR(-ENOMEM);
>>>>>> + goto module_put;
>>>>>> + }
>>>>>> + tee_device = to_tee_client_device(tee_rproc_ctx->dev);
>>>>>> + memset(&sess_arg, 0, sizeof(sess_arg));
>>>>>> +
>>>>>> + memcpy(sess_arg.uuid, tee_device->id.uuid.b,
>>>>>> TEE_IOCTL_UUID_LEN);
>>>>>> +
>>>>>> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
>>>>>> + sess_arg.num_params = 1;
>>>>>> +
>>>>>> + param[0] = (struct tee_param) {
>>>>>> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
>>>>>> + .u.value.a = rproc_id,
>>>>>> + };
>>>>>> +
>>>>>> + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx,
>>>>>> &sess_arg, param);
>>>>>> + if (ret < 0 || sess_arg.ret != 0) {
>>>>>> + dev_err(dev, "tee_client_open_session failed, err:
>>>>>> %x\n", sess_arg.ret);
>>>>>> + p_err = ERR_PTR(-EINVAL);
>>>>>> + goto module_put;
>>>>>> + }
>>>>>> +
>>>>>> + trproc->parent = dev;
>>>>>> + trproc->rproc_id = rproc_id;
>>>>>> + trproc->session_id = sess_arg.session;
>>>>>> +
>>>>>> + trproc->rproc = rproc;
>>>>>> + rproc->tee_interface = trproc;
>>>>>> +
>>>>>> + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions);
>>>>>> +
>>>>>> + return trproc;
>>>>>> +
>>>>>> +module_put:
>>>>>> + module_put(THIS_MODULE);
>>>>>> + return p_err;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(tee_rproc_register);
>>>>>> +
>>>>>> +int tee_rproc_unregister(struct tee_rproc *trproc)
>>>>>> +{
>>>>>> + struct rproc *rproc = trproc->rproc;
>>>>>> + int ret;
>>>>>> +
>>>>>> + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx,
>>>>>> trproc->session_id);
>>>>>> + if (ret < 0)
>>>>>> + dev_err(trproc->parent, "tee_client_close_session
>>>>>> failed, err: %x\n", ret);
>>>>>> +
>>>>>> + list_del(&trproc->node);
>>>>>> + rproc->tee_interface = NULL;
>>>>>> +
>>>>>> + module_put(THIS_MODULE);
>>>>>> +
>>>>>> + return ret;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(tee_rproc_unregister);
>>>>>> +
>>>>>> +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver,
>>>>>> const void *data)
>>>>>> +{
>>>>>> + /* Today we support only the OP-TEE, could be extend to other
>>>>>> tees */
>>>>>> + return (ver->impl_id == TEE_IMPL_ID_OPTEE);
>>>>>> +}
>>>>>> +
>>>>>> +static int tee_rproc_probe(struct device *dev)
>>>>>> +{
>>>>>> + struct tee_context *tee_ctx;
>>>>>> + int ret;
>>>>>> +
>>>>>> + /* Open context with TEE driver */
>>>>>> + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match,
>>>>>> NULL, NULL);
>>>>>> + if (IS_ERR(tee_ctx))
>>>>>> + return PTR_ERR(tee_ctx);
>>>>>> +
>>>>>> + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_rproc_ctx),
>>>>>> GFP_KERNEL);
>>>>>> + if (!tee_rproc_ctx) {
>>>>>> + ret = -ENOMEM;
>>>>>> + goto err;
>>>>>> + }
>>>>>> +
>>>>>> + tee_rproc_ctx->dev = dev;
>>>>>> + tee_rproc_ctx->tee_ctx = tee_ctx;
>>>>>> + INIT_LIST_HEAD(&tee_rproc_ctx->sessions);
>>>>>> +
>>>>>> + return 0;
>>>>>> +err:
>>>>>> + tee_client_close_context(tee_ctx);
>>>>>> +
>>>>>> + return ret;
>>>>>> +}
>>>>>> +
>>>>>> +static int tee_rproc_remove(struct device *dev)
>>>>>> +{
>>>>>> + struct tee_rproc *entry, *tmp;
>>>>>> +
>>>>>> + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions,
>>>>>> node) {
>>>>>> + tee_client_close_session(tee_rproc_ctx->tee_ctx,
>>>>>> entry->session_id);
>>>>>> + list_del(&entry->node);
>>>>>> + kfree(entry);
>>>>>> + }
>>>>>> +
>>>>>> + tee_client_close_context(tee_rproc_ctx->tee_ctx);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +MODULE_DEVICE_TABLE(tee, tee_rproc_id_table);
>>>>>> +
>>>>>> +static struct tee_client_driver tee_rproc_fw_driver = {
>>>>>> + .id_table = tee_rproc_id_table,
>>>>>> + .driver = {
>>>>>> + .name = KBUILD_MODNAME,
>>>>>> + .bus = &tee_bus_type,
>>>>>> + .probe = tee_rproc_probe,
>>>>>> + .remove = tee_rproc_remove,
>>>>>> + },
>>>>>> +};
>>>>>> +
>>>>>> +static int __init tee_rproc_fw_mod_init(void)
>>>>>> +{
>>>>>> + return driver_register(&tee_rproc_fw_driver.driver);
>>>>>> +}
>>>>>> +
>>>>>> +static void __exit tee_rproc_fw_mod_exit(void)
>>>>>> +{
>>>>>> + driver_unregister(&tee_rproc_fw_driver.driver);
>>>>>> +}
>>>>>> +
>>>>>> +module_init(tee_rproc_fw_mod_init);
>>>>>> +module_exit(tee_rproc_fw_mod_exit);
>>>>>> +
>>>>>> +MODULE_DESCRIPTION(" remote processor support with a TEE application");
>>>>>> +MODULE_LICENSE("GPL");
>>>>>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>>>>>> index 8fd0d7f63c8e..fbe1d6793709 100644
>>>>>> --- a/include/linux/remoteproc.h
>>>>>> +++ b/include/linux/remoteproc.h
>>>>>> @@ -503,6 +503,8 @@ enum rproc_features {
>>>>>> RPROC_MAX_FEATURES,
>>>>>> };
>>>>>>
>>>>>> +struct tee_rproc;
>>>>>> +
>>>>>> /**
>>>>>> * struct rproc - represents a physical remote processor device
>>>>>> * @node: list node of this rproc object
>>>>>> @@ -545,6 +547,7 @@ enum rproc_features {
>>>>>> * @cdev: character device of the rproc
>>>>>> * @cdev_put_on_release: flag to indicate if remoteproc should be
>>>>>> shutdown on @char_dev release
>>>>>> * @features: indicate remoteproc features
>>>>>> + * @tee_interface: pointer to the remoteproc tee context
>>>>>> */
>>>>>> struct rproc {
>>>>>> struct list_head node;
>>>>>> @@ -586,6 +589,7 @@ struct rproc {
>>>>>> struct cdev cdev;
>>>>>> bool cdev_put_on_release;
>>>>>> DECLARE_BITMAP(features, RPROC_MAX_FEATURES);
>>>>>> + struct tee_rproc *tee_interface;
>>>>>> };
>>>>>>
>>>>>> /**
>>>>>> diff --git a/include/linux/remoteproc_tee.h
>>>>>> b/include/linux/remoteproc_tee.h
>>>>>> new file mode 100644
>>>>>> index 000000000000..ccf34a218d54
>>>>>> --- /dev/null
>>>>>> +++ b/include/linux/remoteproc_tee.h
>>>>>> @@ -0,0 +1,100 @@
>>>>>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>>>>>> +/*
>>>>>> + * Copyright(c) 2024 STMicroelectronics
>>>>>> + */
>>>>>> +
>>>>>> +#ifndef REMOTEPROC_TEE_H
>>>>>> +#define REMOTEPROC_TEE_H
>>>>>> +
>>>>>> +#include <linux/tee_drv.h>
>>>>>> +#include <linux/firmware.h>
>>>>>> +#include <linux/remoteproc.h>
>>>>>> +
>>>>>> +struct rproc;
>>>>>> +
>>>>>> +/**
>>>>>> + * struct tee_rproc - TEE remoteproc structure
>>>>>> + * @node: Reference in list
>>>>>> + * @rproc: Remoteproc reference
>>>>>> + * @parent: Parent device
>>>>>> + * @rproc_id: Identifier of the target firmware
>>>>>> + * @session_id: TEE session identifier
>>>>>> + */
>>>>>> +struct tee_rproc {
>>>>>> + struct list_head node;
>>>>>> + struct rproc *rproc;
>>>>>> + struct device *parent;
>>>>>> + u32 rproc_id;
>>>>>> + u32 session_id;
>>>>>> +};
>>>>>> +
>>>>>> +#if IS_REACHABLE(CONFIG_REMOTEPROC_TEE)
>>>>>> +
>>>>>> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc
>>>>>> *rproc,
>>>>>> + unsigned int rproc_id);
>>>>>> +int tee_rproc_unregister(struct tee_rproc *trproc);
>>>>>> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw);
>>>>>> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw);
>>>>>> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc
>>>>>> *rproc,
>>>>>> + const struct
>>>>>> firmware *fw);
>>>>>> +int tee_rproc_start(struct rproc *rproc);
>>>>>> +int tee_rproc_stop(struct rproc *rproc);
>>>>>> +
>>>>>> +#else
>>>>>> +
>>>>>> +static inline struct tee_rproc *tee_rproc_register(struct device *dev,
>>>>>> struct rproc *rproc,
>>>>>> + unsigned int
>>>>>> rproc_id)
>>>>>> +{
>>>>>> + return ERR_PTR(-ENODEV);
>>>>>> +}
>>>>>> +
>>>>>> +static int tee_rproc_parse_fw(struct rproc *rproc, const struct
>>>>>> firmware *fw)
>>>>>> +{
>>>>>> + /* This shouldn't be possible */
>>>>>> + WARN_ON(1);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static inline int tee_rproc_unregister(struct tee_rproc *trproc)
>>>>>> +{
>>>>>> + /* This shouldn't be possible */
>>>>>> + WARN_ON(1);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct
>>>>>> firmware *fw)
>>>>>> +{
>>>>>> + /* This shouldn't be possible */
>>>>>> + WARN_ON(1);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static inline int tee_rproc_start(struct rproc *rproc)
>>>>>> +{
>>>>>> + /* This shouldn't be possible */
>>>>>> + WARN_ON(1);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static inline int tee_rproc_stop(struct rproc *rproc)
>>>>>> +{
>>>>>> + /* This shouldn't be possible */
>>>>>> + WARN_ON(1);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static inline struct resource_table *
>>>>>> +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct
>>>>>> firmware *fw)
>>>>>> +{
>>>>>> + /* This shouldn't be possible */
>>>>>> + WARN_ON(1);
>>>>>> +
>>>>>> + return NULL;
>>>>>> +}
>>>>>> +#endif /* CONFIG_REMOTEPROC_TEE */
>>>>>> +#endif /* REMOTEPROC_TEE_H */
>>>>>> --
>>>>>> 2.25.1
>>>>>>
