Hi,
On 6/19/24 17:41, Mathieu Poirier wrote:
> Hi,
>
> On Tue, Jun 11, 2024 at 09:39:01AM +0200, Arnaud Pouliquen wrote:
>> Add a remoteproc TEE (Trusted Execution Environment) driver
>> that will be probed by the TEE bus. If the associated Trusted
>> application is supported on secure part this driver offers a client
>> interface to load a firmware in the secure part.
>> This firmware could be authenticated by the secure trusted application.
>>
>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliq...@foss.st.com>
>> ---
>> update from V
>> - Fix missing "{" in tee_rproc_find_loaded_rsc_table inline definition.
>>
>> update from V5
>> - make tee_rproc_get_loaded_rsc_table() local and replace this API by
>> tee_rproc_find_loaded_rsc_table()
>> - map and unmap the resource table in tee_rproc_parse_fw to make a cached
>> copy
>> - use the new rproc_pa_to_va() API to map the resource table memory declared
>> in carevout
>> - remove tee_rproc_release_loaded_rsc_table as no more used.
>> ---
>> drivers/remoteproc/Kconfig | 10 +
>> drivers/remoteproc/Makefile | 1 +
>> drivers/remoteproc/tee_remoteproc.c | 451 ++++++++++++++++++++++++++++
>> include/linux/remoteproc.h | 4 +
>> include/linux/tee_remoteproc.h | 100 ++++++
>> 5 files changed, 566 insertions(+)
>> create mode 100644 drivers/remoteproc/tee_remoteproc.c
>> create mode 100644 include/linux/tee_remoteproc.h
>>
>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>> index 48845dc8fa85..6c1c07202276 100644
>> --- a/drivers/remoteproc/Kconfig
>> +++ b/drivers/remoteproc/Kconfig
>> @@ -365,6 +365,16 @@ config XLNX_R5_REMOTEPROC
>>
>> It's safe to say N if not interested in using RPU r5f cores.
>>
>> +
>> +config TEE_REMOTEPROC
>> + tristate "Remoteproc support by a TEE application"
>> + depends on OPTEE
>> + help
>> + Support a remote processor with a TEE application. The Trusted
>> + Execution Context is responsible for loading the trusted firmware
>> + image and managing the remote processor's lifecycle.
>> + This can be either built-in or a loadable module.
>> +
>> endif # REMOTEPROC
>>
>> endmenu
>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
>> index 91314a9b43ce..fa8daebce277 100644
>> --- a/drivers/remoteproc/Makefile
>> +++ b/drivers/remoteproc/Makefile
>> @@ -36,6 +36,7 @@ obj-$(CONFIG_RCAR_REMOTEPROC) += rcar_rproc.o
>> obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
>> obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
>> obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
>> +obj-$(CONFIG_TEE_REMOTEPROC) += tee_remoteproc.o
>> obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o
>> obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o
>> obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o
>> diff --git a/drivers/remoteproc/tee_remoteproc.c
>> b/drivers/remoteproc/tee_remoteproc.c
>> new file mode 100644
>> index 000000000000..9455fd9d0d2d
>> --- /dev/null
>> +++ b/drivers/remoteproc/tee_remoteproc.c
>> @@ -0,0 +1,451 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Copyright (C) STMicroelectronics 2024 - All Rights Reserved
>> + * Author: Arnaud Pouliquen <arnaud.pouliq...@foss.st.com>
>> + */
>> +
>> +#include <linux/firmware.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/remoteproc.h>
>> +#include <linux/slab.h>
>> +#include <linux/tee_drv.h>
>> +#include <linux/tee_remoteproc.h>
>> +
>> +#include "remoteproc_internal.h"
>> +
>> +#define MAX_TEE_PARAM_ARRY_MEMBER 4
>> +
>> +/*
>> + * Authentication of the firmware and load in the remote processor memory
>> + *
>> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
>> + * [in] params[1].memref: buffer containing the image of the
>> buffer
>> + */
>> +#define TA_RPROC_FW_CMD_LOAD_FW 1
>> +
>> +/*
>> + * Start the remote processor
>> + *
>> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
>> + */
>> +#define TA_RPROC_FW_CMD_START_FW 2
>> +
>> +/*
>> + * Stop the remote processor
>> + *
>> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
>> + */
>> +#define TA_RPROC_FW_CMD_STOP_FW 3
>> +
>> +/*
>> + * Return the address of the resource table, or 0 if not found
>> + * No check is done to verify that the address returned is accessible by
>> + * the non secure context. If the resource table is loaded in a protected
>> + * memory the access by the non secure context will lead to a data abort.
>> + *
>> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
>> + * [out] params[1].value.a: 32bit LSB resource table memory address
>> + * [out] params[1].value.b: 32bit MSB resource table memory address
>> + * [out] params[2].value.a: 32bit LSB resource table memory size
>> + * [out] params[2].value.b: 32bit MSB resource table memory size
>> + */
>> +#define TA_RPROC_FW_CMD_GET_RSC_TABLE 4
>> +
>> +/*
>> + * Return the address of the core dump
>> + *
>> + * [in] params[0].value.a: unique 32bit identifier of the remote processor
>> + * [out] params[1].memref: address of the core dump image if exist,
>> + * else return Null
>> + */
>> +#define TA_RPROC_FW_CMD_GET_COREDUMP 5
>> +
>> +struct tee_rproc_context {
>> + struct list_head sessions;
>> + struct tee_context *tee_ctx;
>> + struct device *dev;
>> +};
>> +
>> +static struct tee_rproc_context *tee_rproc_ctx;
>> +
>> +static void tee_rproc_prepare_args(struct tee_rproc *trproc, int cmd,
>> + struct tee_ioctl_invoke_arg *arg,
>> + struct tee_param *param,
>> + unsigned int num_params)
>> +{
>> + memset(arg, 0, sizeof(*arg));
>> + memset(param, 0, MAX_TEE_PARAM_ARRY_MEMBER * sizeof(*param));
>> +
>> + arg->func = cmd;
>> + arg->session = trproc->session_id;
>> + arg->num_params = num_params + 1;
>> +
>> + param[0] = (struct tee_param) {
>> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
>> + .u.value.a = trproc->rproc_id,
>> + };
>> +}
>> +
>> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw)
>> +{
>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>> + struct tee_rproc *trproc = rproc->tee_interface;
>> + struct tee_ioctl_invoke_arg arg;
>> + struct tee_shm *fw_shm;
>> + int ret;
>> +
>> + if (!trproc)
>> + return -EINVAL;
>> +
>> + fw_shm = tee_shm_register_kernel_buf(tee_rproc_ctx->tee_ctx, (void
>> *)fw->data, fw->size);
>> + if (IS_ERR(fw_shm))
>> + return PTR_ERR(fw_shm);
>> +
>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_LOAD_FW, &arg, param, 1);
>> +
>> + /* Provide the address of the firmware image */
>> + param[1] = (struct tee_param) {
>> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT,
>> + .u.memref = {
>> + .shm = fw_shm,
>> + .size = fw->size,
>> + .shm_offs = 0,
>> + },
>> + };
>> +
>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
>> + if (ret < 0 || arg.ret != 0) {
>> + dev_err(tee_rproc_ctx->dev,
>> + "TA_RPROC_FW_CMD_LOAD_FW invoke failed TEE err: %x,
>> ret:%x\n",
>> + arg.ret, ret);
>> + if (!ret)
>> + ret = -EIO;
>> + }
>> +
>> + tee_shm_free(fw_shm);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(tee_rproc_load_fw);
>> +
>> +static int tee_rproc_get_loaded_rsc_table(struct rproc *rproc, phys_addr_t
>> *rsc_pa,
>> + size_t *table_sz)
>> +{
>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>> + struct tee_rproc *trproc = rproc->tee_interface;
>> + struct tee_ioctl_invoke_arg arg;
>> + int ret;
>> +
>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_GET_RSC_TABLE, &arg,
>> param, 2);
>> +
>> + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
>> + param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
>> +
>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
>> + if (ret < 0 || arg.ret != 0) {
>> + dev_err(tee_rproc_ctx->dev,
>> + "TA_RPROC_FW_CMD_GET_RSC_TABLE invoke failed TEE err:
>> %x, ret:%x\n",
>> + arg.ret, ret);
>> + return -EIO;
>> + }
>> +
>> + *table_sz = param[2].u.value.a;
>> +
>> + if (*table_sz)
>> + *rsc_pa = param[1].u.value.a;
>> + else
>> + *rsc_pa = 0;
>> +
>> + return 0;
>> +}
>> +
>> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
>> +{
>> + phys_addr_t rsc_table;
>> + void __iomem *rsc_va;
>> + size_t table_sz;
>> + int ret;
>> +
>> + ret = tee_rproc_load_fw(rproc, fw);
>> + if (ret)
>> + return ret;
>> +
>> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz);
>> + if (ret)
>> + return ret;
>> +
>> + /*
>> + * We assume here that the memory mapping is the same between the TEE
>> and Linux kernel
>> + * contexts. Else a new TEE remoteproc service could be needed to get a
>> copy of the
>> + * resource table
>> + */
>> + rsc_va = ioremap_wc(rsc_table, table_sz);
>> + if (IS_ERR_OR_NULL(rsc_va)) {
>> + dev_err(tee_rproc_ctx->dev, "Unable to map memory region:
>> %pa+%zx\n",
>> + &rsc_table, table_sz);
>> + return -ENOMEM;
>> + }
>> +
>> + /*
>> + * Create a copy of the resource table to have the same behavior as the
>> elf loader.
>> + * This cached table will be used after the remoteproc stops to free
>> resources, and for
>> + * crash recovery to reapply the settings.
>> + */
>> + rproc->cached_table = kmemdup((__force void *)rsc_va, table_sz,
>> GFP_KERNEL);
>> + if (!rproc->cached_table) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + rproc->table_ptr = rproc->cached_table;
>> + rproc->table_sz = table_sz;
>> +
>> +out:
>> + iounmap(rsc_va);
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(tee_rproc_parse_fw);
>> +
>> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc,
>> + const struct firmware
>> *fw)
>> +{
>> + struct tee_rproc *trproc = rproc->tee_interface;
>> + phys_addr_t rsc_table;
>> + size_t table_sz;
>> + int ret;
>> +
>> + if (!trproc)
>> + return ERR_PTR(-EINVAL);
>> +
>> + ret = tee_rproc_get_loaded_rsc_table(rproc, &rsc_table, &table_sz);
>> + if (ret)
>> + return ERR_PTR(ret);
>> +
>> + rproc->table_sz = table_sz;
>> + if (!table_sz)
>> + return NULL;
>> +
>> + /*
>> + * At this step the memory area that contains the resource table should
>> have be declared
>> + * in the remote proc platform driver and allocated by
>> rproc_alloc_registered_carveouts().
>> + */
>> +
>> + return (struct resource_table *)rproc_pa_to_va(rproc, rsc_table,
>> table_sz, NULL);
>> +}
>> +EXPORT_SYMBOL_GPL(tee_rproc_find_loaded_rsc_table);
>> +
>> +int tee_rproc_start(struct rproc *rproc)
>> +{
>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>> + struct tee_rproc *trproc = rproc->tee_interface;
>> + struct tee_ioctl_invoke_arg arg;
>> + int ret = 0;
>> +
>> + if (!trproc)
>> + return -EINVAL;
>> +
>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_START_FW, &arg, param,
>> 0);
>> +
>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
>> + if (ret < 0 || arg.ret != 0) {
>> + dev_err(tee_rproc_ctx->dev,
>> + "TA_RPROC_FW_CMD_START_FW invoke failed TEE err: %x,
>> ret:%x\n",
>> + arg.ret, ret);
>> + if (!ret)
>> + return -EIO;
>> + }
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(tee_rproc_start);
>> +
>> +int tee_rproc_stop(struct rproc *rproc)
>> +{
>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>> + struct tee_rproc *trproc = rproc->tee_interface;
>> + struct tee_ioctl_invoke_arg arg;
>> + int ret;
>> +
>> + if (!trproc)
>> + return -EINVAL;
>> +
>> + tee_rproc_prepare_args(trproc, TA_RPROC_FW_CMD_STOP_FW, &arg, param, 0);
>> +
>> + ret = tee_client_invoke_func(tee_rproc_ctx->tee_ctx, &arg, param);
>> + if (ret < 0 || arg.ret != 0) {
>> + dev_err(tee_rproc_ctx->dev,
>> + "TA_RPROC_FW_CMD_STOP_FW invoke failed TEE err: %x,
>> ret:%x\n",
>> + arg.ret, ret);
>> + if (!ret)
>> + ret = -EIO;
>> + }
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(tee_rproc_stop);
>> +
>> +static const struct tee_client_device_id stm32_tee_rproc_id_table[] = {
>> + {UUID_INIT(0x80a4c275, 0x0a47, 0x4905,
>> + 0x82, 0x85, 0x14, 0x86, 0xa9, 0x77, 0x1a, 0x08)},
>> + {}
>> +};
>> +
>> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc
>> *rproc, unsigned int rproc_id)
>> +{
>> + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMBER];
>> + struct tee_ioctl_open_session_arg sess_arg;
>> + struct tee_client_device *tee_device;
>> + struct tee_rproc *trproc, *p_err;
>> + int ret;
>> +
>> + /*
>> + * Test if the device has been probed by the TEE bus. In case of
>> failure, we ignore the
>> + * reason. The bus could be not yet probed or the service not available
>> in the secure
>> + * firmware.The assumption in such a case is that the TEE remoteproc is
>> not probed.
>> + */
>> + if (!tee_rproc_ctx)
>> + return ERR_PTR(-EPROBE_DEFER);
>> +
>> + /* Prevent tee rproc module from being removed */
>> + if (!try_module_get(THIS_MODULE)) {
>> + dev_err(tee_rproc_ctx->dev, "can't get owner\n");
>> + p_err = ERR_PTR(-ENODEV);
>> + goto module_put;
>> + }
>> +
>> + trproc = devm_kzalloc(dev, sizeof(*trproc), GFP_KERNEL);
>> + if (!trproc) {
>> + p_err = ERR_PTR(-ENOMEM);
>> + goto module_put;
>> + }
>> + tee_device = to_tee_client_device(tee_rproc_ctx->dev);
>> + memset(&sess_arg, 0, sizeof(sess_arg));
>> +
>> + memcpy(sess_arg.uuid, tee_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
>> +
>> + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
>> + sess_arg.num_params = 1;
>> +
>> + param[0] = (struct tee_param) {
>> + .attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
>> + .u.value.a = rproc_id,
>> + };
>> +
>> + ret = tee_client_open_session(tee_rproc_ctx->tee_ctx, &sess_arg, param);
>> + if (ret < 0 || sess_arg.ret != 0) {
>> + dev_err(dev, "tee_client_open_session failed, err: %x\n",
>> sess_arg.ret);
>> + p_err = ERR_PTR(-EINVAL);
>> + goto module_put;
>> + }
>> +
>> + trproc->parent = dev;
>> + trproc->rproc_id = rproc_id;
>> + trproc->session_id = sess_arg.session;
>> +
>> + trproc->rproc = rproc;
>> + rproc->tee_interface = trproc;
>> +
>> + list_add_tail(&trproc->node, &tee_rproc_ctx->sessions);
>> +
>> + return trproc;
>> +
>> +module_put:
>> + module_put(THIS_MODULE);
>> + return p_err;
>> +}
>> +EXPORT_SYMBOL_GPL(tee_rproc_register);
>> +
>> +int tee_rproc_unregister(struct tee_rproc *trproc)
>> +{
>> + struct rproc *rproc = trproc->rproc;
>> + int ret;
>> +
>> + ret = tee_client_close_session(tee_rproc_ctx->tee_ctx,
>> trproc->session_id);
>> + if (ret < 0)
>> + dev_err(trproc->parent, "tee_client_close_session failed, err:
>> %x\n", ret);
>> +
>> + list_del(&trproc->node);
>> + rproc->tee_interface = NULL;
>> +
>> + module_put(THIS_MODULE);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(tee_rproc_unregister);
>> +
>> +static int tee_rproc_ctx_match(struct tee_ioctl_version_data *ver, const
>> void *data)
>> +{
>> + /* Today we support only the OP-TEE, could be extend to other tees */
>> + return (ver->impl_id == TEE_IMPL_ID_OPTEE);
>> +}
>> +
>> +static int tee_rproc_probe(struct device *dev)
>> +{
>> + struct tee_context *tee_ctx;
>> + int ret;
>> +
>> + /* Open context with TEE driver */
>> + tee_ctx = tee_client_open_context(NULL, tee_rproc_ctx_match, NULL,
>> NULL);
>> + if (IS_ERR(tee_ctx))
>> + return PTR_ERR(tee_ctx);
>> +
>> + tee_rproc_ctx = devm_kzalloc(dev, sizeof(*tee_ctx), GFP_KERNEL);
>
> I started reviewing this set - aside from the above allocation that isn't
> right,
> I am definitely not sure about ops::pa_to_va(). There is a patchset from TI
> on
> the mailing list [1] that also needs to translate addresses only accessible to
> the remote processor and they simply enhanced their ops::da_to_va(). Perhaps
> I'll find an answer as I continue to review this set...
The DA to PA conversion is handled by OP-TEE when loading the firmware.
Therefore, I have assumed that Linux could not know how to convert from DA to
PA. This question is also relevant for the "attach" use case, I guess.
If we consider that the DA to VA conversion should always be supported by the
remoteproc driver, we would need to obtain the DA from OP-TEE.
The impact would be to update the TA_RPROC_FW_CMD_GET_RSC_TABLE API to also
return the DA. This would require changes in the OP-TEE code by adding a new
output parameter to retrieve the DA.
Thanks,
Arnaud
>
> [1]. [PATCH v10 0/8] TI K3 M4F support on AM62 and AM64 SoCs
>
>> + if (!tee_rproc_ctx) {
>> + ret = -ENOMEM;
>> + goto err;
>> + }
>> +
>> + tee_rproc_ctx->dev = dev;
>> + tee_rproc_ctx->tee_ctx = tee_ctx;
>> + INIT_LIST_HEAD(&tee_rproc_ctx->sessions);
>> +
>> + return 0;
>> +err:
>> + tee_client_close_context(tee_ctx);
>> +
>> + return ret;
>> +}
>> +
>> +static int tee_rproc_remove(struct device *dev)
>> +{
>> + struct tee_rproc *entry, *tmp;
>> +
>> + list_for_each_entry_safe(entry, tmp, &tee_rproc_ctx->sessions, node) {
>> + tee_client_close_session(tee_rproc_ctx->tee_ctx,
>> entry->session_id);
>> + list_del(&entry->node);
>> + kfree(entry);
>> + }
>> +
>> + tee_client_close_context(tee_rproc_ctx->tee_ctx);
>> +
>> + return 0;
>> +}
>> +
>> +MODULE_DEVICE_TABLE(tee, stm32_tee_rproc_id_table);
>> +
>> +static struct tee_client_driver tee_rproc_fw_driver = {
>> + .id_table = stm32_tee_rproc_id_table,
>> + .driver = {
>> + .name = KBUILD_MODNAME,
>> + .bus = &tee_bus_type,
>> + .probe = tee_rproc_probe,
>> + .remove = tee_rproc_remove,
>> + },
>> +};
>> +
>> +static int __init tee_rproc_fw_mod_init(void)
>> +{
>> + return driver_register(&tee_rproc_fw_driver.driver);
>> +}
>> +
>> +static void __exit tee_rproc_fw_mod_exit(void)
>> +{
>> + driver_unregister(&tee_rproc_fw_driver.driver);
>> +}
>> +
>> +module_init(tee_rproc_fw_mod_init);
>> +module_exit(tee_rproc_fw_mod_exit);
>> +
>> +MODULE_DESCRIPTION(" TEE remote processor control driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> index 28aa62a3b505..6168f778414f 100644
>> --- a/include/linux/remoteproc.h
>> +++ b/include/linux/remoteproc.h
>> @@ -505,6 +505,8 @@ enum rproc_features {
>> RPROC_MAX_FEATURES,
>> };
>>
>> +struct tee_rproc;
>> +
>> /**
>> * struct rproc - represents a physical remote processor device
>> * @node: list node of this rproc object
>> @@ -547,6 +549,7 @@ enum rproc_features {
>> * @cdev: character device of the rproc
>> * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown
>> on @char_dev release
>> * @features: indicate remoteproc features
>> + * @tee_interface: pointer to the remoteproc tee context
>> */
>> struct rproc {
>> struct list_head node;
>> @@ -588,6 +591,7 @@ struct rproc {
>> struct cdev cdev;
>> bool cdev_put_on_release;
>> DECLARE_BITMAP(features, RPROC_MAX_FEATURES);
>> + struct tee_rproc *tee_interface;
>> };
>>
>> /**
>> diff --git a/include/linux/tee_remoteproc.h b/include/linux/tee_remoteproc.h
>> new file mode 100644
>> index 000000000000..c9ae4f60e844
>> --- /dev/null
>> +++ b/include/linux/tee_remoteproc.h
>> @@ -0,0 +1,100 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * Copyright(c) 2024 STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#ifndef TEE_REMOTEPROC_H
>> +#define TEE_REMOTEPROC_H
>> +
>> +#include <linux/tee_drv.h>
>> +#include <linux/firmware.h>
>> +#include <linux/remoteproc.h>
>> +
>> +struct rproc;
>> +
>> +/**
>> + * struct tee_rproc - TEE remoteproc structure
>> + * @node: Reference in list
>> + * @rproc: Remoteproc reference
>> + * @parent: Parent device
>> + * @rproc_id: Identifier of the target firmware
>> + * @session_id: TEE session identifier
>> + */
>> +struct tee_rproc {
>> + struct list_head node;
>> + struct rproc *rproc;
>> + struct device *parent;
>> + u32 rproc_id;
>> + u32 session_id;
>> +};
>> +
>> +#if IS_REACHABLE(CONFIG_TEE_REMOTEPROC)
>> +
>> +struct tee_rproc *tee_rproc_register(struct device *dev, struct rproc
>> *rproc,
>> + unsigned int rproc_id);
>> +int tee_rproc_unregister(struct tee_rproc *trproc);
>> +int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw);
>> +int tee_rproc_load_fw(struct rproc *rproc, const struct firmware *fw);
>> +struct resource_table *tee_rproc_find_loaded_rsc_table(struct rproc *rproc,
>> + const struct firmware
>> *fw);
>> +int tee_rproc_start(struct rproc *rproc);
>> +int tee_rproc_stop(struct rproc *rproc);
>> +
>> +#else
>> +
>> +static inline struct tee_rproc *tee_rproc_register(struct device *dev,
>> struct rproc *rproc,
>> + unsigned int rproc_id)
>> +{
>> + return ERR_PTR(-ENODEV);
>> +}
>> +
>> +static int tee_rproc_parse_fw(struct rproc *rproc, const struct firmware
>> *fw)
>> +{
>> + /* This shouldn't be possible */
>> + WARN_ON(1);
>> +
>> + return 0;
>> +}
>> +
>> +static inline int tee_rproc_unregister(struct tee_rproc *trproc)
>> +{
>> + /* This shouldn't be possible */
>> + WARN_ON(1);
>> +
>> + return 0;
>> +}
>> +
>> +static inline int tee_rproc_load_fw(struct rproc *rproc, const struct
>> firmware *fw)
>> +{
>> + /* This shouldn't be possible */
>> + WARN_ON(1);
>> +
>> + return 0;
>> +}
>> +
>> +static inline int tee_rproc_start(struct rproc *rproc)
>> +{
>> + /* This shouldn't be possible */
>> + WARN_ON(1);
>> +
>> + return 0;
>> +}
>> +
>> +static inline int tee_rproc_stop(struct rproc *rproc)
>> +{
>> + /* This shouldn't be possible */
>> + WARN_ON(1);
>> +
>> + return 0;
>> +}
>> +
>> +static inline struct resource_table *
>> +tee_rproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware
>> *fw)
>> +{
>> + /* This shouldn't be possible */
>> + WARN_ON(1);
>> +
>> + return NULL;
>> +}
>> +#endif /* CONFIG_TEE_REMOTEPROC */
>> +#endif /* TEE_REMOTEPROC_H */
>> --
>> 2.25.1
>>
