On 1/5/24 15:54, Luca Weiss wrote:
Configure the thermals for the XO_THERM thermistor connected to the PMK8003 (which is called PMK8350 in software). The ADC configuration for PMK8350_ADC7_AMUX_THM1_100K_PU has already been added in the past. The trip points can really only be considered as placeholders, more configuration with cooling etc. can be added later. Signed-off-by: Luca Weiss <luca.we...@fairphone.com> --- arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 25 +++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index ade619805519..b7ccfe4011bb 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -112,6 +112,20 @@ active-config0 { }; }; }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; }; };@@ -490,6 +504,17 @@ conn-therm@1 {}; };+&pmk8350_adc_tm {+ status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>;
My ocd would rather see the boolean property at the end anyway Reviewed-by: Konrad Dybcio <konrad.dyb...@linaro.org> Konrad
