On 2023-09-12 15:31:44, Konrad Dybcio wrote:
> These clocks are now handled from within the icc framework and are
> no longer registered from within the CCF. Remove them.
>
> Signed-off-by: Konrad Dybcio <konrad.dyb...@linaro.org>
This makes the USB and IOMMUs probe again on SDM630 devices like the Sony Xperia
XA2 Ultra. Thanks!
Reviewed-by: Marijn Suijten <marijn.suij...@somainline.org>
+cc Dmitry who was talking to me about this SoC.
> ---
> arch/arm64/boot/dts/qcom/sdm630.dtsi | 49
> +++++++-----------------------------
> 1 file changed, 9 insertions(+), 40 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index ec6003212c4d..f11d2a07508c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -605,9 +605,6 @@ bimc: interconnect@1008000 {
> compatible = "qcom,sdm660-bimc";
> reg = <0x01008000 0x78000>;
> #interconnect-cells = <1>;
> - clock-names = "bus", "bus_a";
> - clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> - <&rpmcc RPM_SMD_BIMC_A_CLK>;
> };
>
> restart@10ac000 {
> @@ -619,28 +616,17 @@ cnoc: interconnect@1500000 {
> compatible = "qcom,sdm660-cnoc";
> reg = <0x01500000 0x10000>;
> #interconnect-cells = <1>;
> - clock-names = "bus", "bus_a";
> - clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
> - <&rpmcc RPM_SMD_CNOC_A_CLK>;
> };
>
> snoc: interconnect@1626000 {
> compatible = "qcom,sdm660-snoc";
> reg = <0x01626000 0x7090>;
> #interconnect-cells = <1>;
> - clock-names = "bus", "bus_a";
> - clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> - <&rpmcc RPM_SMD_SNOC_A_CLK>;
> };
>
> anoc2_smmu: iommu@16c0000 {
> compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
> reg = <0x016c0000 0x40000>;
> -
> - assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
> - assigned-clock-rates = <1000>;
> - clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
> - clock-names = "bus";
> #global-interrupts = <2>;
> #iommu-cells = <1>;
>
> @@ -685,16 +671,12 @@ a2noc: interconnect@1704000 {
> compatible = "qcom,sdm660-a2noc";
> reg = <0x01704000 0xc100>;
> #interconnect-cells = <1>;
> - clock-names = "bus",
> - "bus_a",
> - "ipa",
> + clock-names = "ipa",
> "ufs_axi",
> "aggre2_ufs_axi",
> "aggre2_usb3_axi",
> "cfg_noc_usb2_axi";
> - clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
> - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
> - <&rpmcc RPM_SMD_IPA_CLK>,
> + clocks = <&rpmcc RPM_SMD_IPA_CLK>,
> <&gcc GCC_UFS_AXI_CLK>,
> <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
> <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
> @@ -705,10 +687,8 @@ mnoc: interconnect@1745000 {
> compatible = "qcom,sdm660-mnoc";
> reg = <0x01745000 0xa010>;
> #interconnect-cells = <1>;
> - clock-names = "bus", "bus_a", "iface";
> - clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
> - <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
> - <&mmcc AHB_CLK_SRC>;
> + clock-names = "iface";
> + clocks = <&mmcc AHB_CLK_SRC>;
> };
>
> tsens: thermal-sensor@10ae000 {
> @@ -1228,20 +1208,16 @@ usb3: usb@a8f8800 {
> <&gcc GCC_USB30_MASTER_CLK>,
> <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
> <&gcc GCC_USB30_SLEEP_CLK>,
> - <&gcc GCC_USB30_MOCK_UTMI_CLK>,
> - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
> + <&gcc GCC_USB30_MOCK_UTMI_CLK>;
> clock-names = "cfg_noc",
> "core",
> "iface",
> "sleep",
> - "mock_utmi",
> - "bus";
> + "mock_utmi";
>
> assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
> - <&gcc GCC_USB30_MASTER_CLK>,
> - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
> - assigned-clock-rates = <19200000>, <120000000>,
> - <19200000>;
> + <&gcc GCC_USB30_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <120000000>;
>
> interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
> @@ -2144,10 +2120,9 @@ mmss_smmu: iommu@cd00000 {
>
> clocks = <&mmcc MNOC_AHB_CLK>,
> <&mmcc BIMC_SMMU_AHB_CLK>,
> - <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
> <&mmcc BIMC_SMMU_AXI_CLK>;
> clock-names = "iface-mm", "iface-smmu",
> - "bus-mm", "bus-smmu";
> + "bus-smmu";
> #global-interrupts = <2>;
> #iommu-cells = <1>;
>
> @@ -2264,12 +2239,6 @@ gnoc: interconnect@17900000 {
> compatible = "qcom,sdm660-gnoc";
> reg = <0x17900000 0xe000>;
> #interconnect-cells = <1>;
> - /*
> - * This one apparently features no clocks,
> - * so let's not mess with the driver needlessly
> - */
> - clock-names = "bus", "bus_a";
> - clocks = <&xo_board>, <&xo_board>;
> };
>
> apcs_glb: mailbox@17911000 {
>
> --
> 2.42.0
>
