ufs node isn't in a right place, 'f' is front of 's', so move it to
above usb node.
Signed-off-by: Jianhua Lu <lujianhua...@gmail.com>
---
.../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 32 +++++++++----------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 3d4ea428e4cb..3de7cb918448 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -657,6 +657,22 @@ &tlmm {
gpio-reserved-ranges = <40 4>;
};
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l17a_3p0>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l6a_1p2>;
+ vccq-max-microamp = <800000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <800000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+ status = "okay";
+};
+
&usb_1 {
/* USB 2.0 only */
qcom,select-utmi-as-pipe-clk;
@@ -678,22 +694,6 @@ &usb_1_hsphy {
status = "okay";
};
-&ufs_mem_hc {
- vcc-supply = <&vreg_l17a_3p0>;
- vcc-max-microamp = <800000>;
- vccq-supply = <&vreg_l6a_1p2>;
- vccq-max-microamp = <800000>;
- vccq2-supply = <&vreg_s4a_1p8>;
- vccq2-max-microamp = <800000>;
- status = "okay";
-};
-
-&ufs_mem_phy {
- vdda-phy-supply = <&vreg_l5a_0p88>;
- vdda-pll-supply = <&vreg_l9a_1p2>;
- status = "okay";
-};
-
&venus {
firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
status = "okay";
--
2.41.0
