Enable the CCI busses where sensors are connected to.
Not covered here is the regulator used for pull-up on the I2C busses.
This would be pm8008_l6 (L6P).
Signed-off-by: Luca Weiss <luca.we...@fairphone.com>
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index c8e7e6689b20..3fc0b3f7dc31 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -388,6 +388,26 @@ vreg_bob: bob {
};
};
+&cci0 {
+ status = "okay";
+};
+
+&cci0_i2c0 {
+ /* IMX800 @ 1a */
+};
+
+&cci0_i2c1 {
+ /* IMX858 @ 29 */
+};
+
+&cci1 {
+ status = "okay";
+};
+
+&cci1_i2c1 {
+ /* S5KJN1SQ03 @ 10 */
+};
+
&dispcc {
/* Disable for now so simple-framebuffer continues working */
status = "disabled";
--
2.42.0
