On 4/12/21 12:53 PM, Russ Weight wrote:
Add macros and definitions required by the MAX10 BMC
Secure Update driver.
Signed-off-by: Russ Weight <russell.h.wei...@intel.com>
Acked-by: Lee Jones <lee.jo...@linaro.org>
---
v9:
- Rebased on next-20210412
v8:
- Previously patch 1/6 in "Intel MAX10 BMC Secure Update Driver"
- Rebased on next-20210121
v7:
- No change
v6:
- No change
v5:
- Renamed USER_FLASH_COUNT to STAGING_FLASH_COUNT
v4:
- No change
v3:
- Changed "MAX10 BMC Secure Engine driver" to "MAX10 BMC Secure
Update driver"
- Removed wrapper functions (m10bmc_raw_*, m10bmc_sys_*). The
underlying functions will be called directly.
v2:
- These functions and macros were previously distributed among
the patches that needed them. They are now grouped together
in a single patch containing changes to the Intel MAX10 BMC
driver.
- Added DRBL_ prefix to some definitions
- Some address definitions were moved here from the .c files that
use them.
---
include/linux/mfd/intel-m10-bmc.h | 85 +++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/include/linux/mfd/intel-m10-bmc.h
b/include/linux/mfd/intel-m10-bmc.h
index c4eb38c13eda..f0044b14136e 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -16,6 +16,9 @@
#define M10BMC_FLASH_END 0x1fffffff
#define M10BMC_MEM_END M10BMC_FLASH_END
+#define M10BMC_STAGING_BASE 0x18000000
+#define M10BMC_STAGING_SIZE 0x3800000
+
/* Register offset of system registers */
#define NIOS2_FW_VERSION 0x0
#define M10BMC_MAC_LOW 0x10
@@ -33,6 +36,88 @@
#define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24)
#define M10BMC_VER_LEGACY_INVALID 0xffffffff
+/* Secure update doorbell register, in system register region */
+#define M10BMC_DOORBELL 0x400
To be consistent with the existing register #defines,
The bit values for the register should follow the register and have a
M10BMC_ prefix
Tom
+
+/* Authorization Result register, in system register region */
+#define M10BMC_AUTH_RESULT 0x404
+
+/* Doorbell register fields */
+#define DRBL_RSU_REQUEST BIT(0)
+#define DRBL_RSU_PROGRESS GENMASK(7, 4)
+#define DRBL_HOST_STATUS GENMASK(11, 8)
+#define DRBL_RSU_STATUS GENMASK(23, 16)
+#define DRBL_PKVL_EEPROM_LOAD_SEC BIT(24)
+#define DRBL_PKVL1_POLL_EN BIT(25)
+#define DRBL_PKVL2_POLL_EN BIT(26)
+#define DRBL_CONFIG_SEL BIT(28)
+#define DRBL_REBOOT_REQ BIT(29)
+#define DRBL_REBOOT_DISABLED BIT(30)
+
+/* Progress states */
+#define RSU_PROG_IDLE 0x0
+#define RSU_PROG_PREPARE 0x1
+#define RSU_PROG_READY 0x3
+#define RSU_PROG_AUTHENTICATING 0x4
+#define RSU_PROG_COPYING 0x5
+#define RSU_PROG_UPDATE_CANCEL 0x6
+#define RSU_PROG_PROGRAM_KEY_HASH 0x7
+#define RSU_PROG_RSU_DONE 0x8
+#define RSU_PROG_PKVL_PROM_DONE 0x9
+
+/* Device and error states */
+#define RSU_STAT_NORMAL 0x0
+#define RSU_STAT_TIMEOUT 0x1
+#define RSU_STAT_AUTH_FAIL 0x2
+#define RSU_STAT_COPY_FAIL 0x3
+#define RSU_STAT_FATAL 0x4
+#define RSU_STAT_PKVL_REJECT 0x5
+#define RSU_STAT_NON_INC 0x6
+#define RSU_STAT_ERASE_FAIL 0x7
+#define RSU_STAT_WEAROUT 0x8
+#define RSU_STAT_NIOS_OK 0x80
+#define RSU_STAT_USER_OK 0x81
+#define RSU_STAT_FACTORY_OK 0x82
+#define RSU_STAT_USER_FAIL 0x83
+#define RSU_STAT_FACTORY_FAIL 0x84
+#define RSU_STAT_NIOS_FLASH_ERR 0x85
+#define RSU_STAT_FPGA_FLASH_ERR 0x86
+
+#define HOST_STATUS_IDLE 0x0
+#define HOST_STATUS_WRITE_DONE 0x1
+#define HOST_STATUS_ABORT_RSU 0x2
+
+#define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
+#define rsu_stat(doorbell) FIELD_GET(DRBL_RSU_STATUS, doorbell)
+
+/* interval 100ms and timeout 5s */
+#define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000)
+#define NIOS_HANDSHAKE_TIMEOUT_US (5 * 1000 * 1000)
+
+/* RSU PREP Timeout (2 minutes) to erase flash staging area */
+#define RSU_PREP_INTERVAL_MS 100
+#define RSU_PREP_TIMEOUT_MS (2 * 60 * 1000)
+
+/* RSU Complete Timeout (40 minutes) for full flash update */
+#define RSU_COMPLETE_INTERVAL_MS 1000
+#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000)
+
+/* Addresses for security related data in FLASH */
+#define BMC_REH_ADDR 0x17ffc004
+#define BMC_PROG_ADDR 0x17ffc000
+#define BMC_PROG_MAGIC 0x5746
+
+#define SR_REH_ADDR 0x17ffd004
+#define SR_PROG_ADDR 0x17ffd000
+#define SR_PROG_MAGIC 0x5253
+
+#define PR_REH_ADDR 0x17ffe004
+#define PR_PROG_ADDR 0x17ffe000
+#define PR_PROG_MAGIC 0x5250
+
+/* Address of 4KB inverted bit vector containing staging area FLASH count */
+#define STAGING_FLASH_COUNT 0x17ffb000
+
/**
* struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
* @dev: this device
