[PATCH 5.10 124/188] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces

[Greg Kroah-Hartman]

From: Stefan Riedmueller <s.riedmuel...@phytec.de>

[ Upstream commit f57011e72f5fe0421ec7a812beb1b57bdf4bb47f ]

Setting the vmmc supplies is crucial since otherwise the supplying
regulators get disabled and the SD interfaces are no longer powered
which leads to system failures if the system is booted from that SD
interface.

Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on 
Phytec phyFLEX-i.MX6 Ouad module")
Signed-off-by: Stefan Riedmueller <s.riedmuel...@phytec.de>
Reviewed-by: Fabio Estevam <feste...@gmail.com>
Signed-off-by: Shawn Guo <shawn...@kernel.org>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi 
b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e361df26a168..5f84e9f2b576 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -432,6 +432,7 @@
        pinctrl-0 = <&pinctrl_usdhc2>;
        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+       vmmc-supply = <&vdd_sd1_reg>;
        status = "disabled";
 };
 
@@ -441,5 +442,6 @@
                     &pinctrl_usdhc3_cdwp>;
        cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
        wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+       vmmc-supply = <&vdd_sd0_reg>;
        status = "disabled";
 };
-- 
2.30.2