From: Nathan Rossi <nathan.ro...@digi.com>
[ Upstream commit 8a28af7a3e85ddf358f8c41e401a33002f7a9587 ]
The aq_nic_start function can fail in a variety of cases which leaves
the device in broken state.
An example case where the start function fails is the
request_threaded_irq which can be interrupted, resulting in a EINTR
result. This can be manually triggered by bringing the link up (e.g. ip
link set up) and triggering a SIGINT on the initiating process (e.g.
Ctrl+C). This would put the device into a half configured state.
Subsequently bringing the link up again would cause the napi_enable to
BUG.
In order to correctly clean up the failed attempt to start a device call
aq_nic_stop.
Signed-off-by: Nathan Rossi <nathan.ro...@digi.com>
Reviewed-by: Igor Russkikh <irussk...@marvell.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
drivers/net/ethernet/aquantia/atlantic/aq_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
index e3ae29e523f0..daf841ae337d 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
@@ -50,8 +50,10 @@ static int aq_ndev_open(struct net_device *ndev)
if (err < 0)
goto err_exit;
err = aq_nic_start(aq_nic);
- if (err < 0)
+ if (err < 0) {
+ aq_nic_stop(aq_nic);
goto err_exit;
+ }
err_exit:
if (err < 0)
--
2.30.1
