On Sun, Mar 21, 2021 at 08:42:12PM +0800, Leo Yan wrote:
> From: Georgi Djakov <georgi.dja...@linaro.org>
> 
> Add DT binding for CoreSight System Trace Macrocell (STM) on msm8916,
> which can benefit the CoreSight development on DB410c.
> 
> Signed-off-by: Georgi Djakov <georgi.dja...@linaro.org>
> Signed-off-by: Leo Yan <leo....@linaro.org>

Thanks for sending the new patch so quickly!

The changes look good to me but I cannot really say if they are fully
correct or work correctly. (Actually I have no idea how to use coresight
or how it is useful! :D)

FWIW:
Acked-by: Stephan Gerhold <step...@gerhold.net>

> ---
> 
> Changes from v2:
> * Correct for author name.
> 
> Changes from v1:
> * alphabetically and address ordering for DT node; pad addresses with
>   zeroes (Stephan Gerhold).
> 
>  arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi |  1 +
>  arch/arm64/boot/dts/qcom/msm8916.dtsi     | 27 +++++++++++++++++++++++
>  2 files changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi 
> b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 3a9538e1ec97..2165b7415add 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -410,6 +410,7 @@ &wcd_codec {
>  &funnel0 { status = "okay"; };
>  &funnel1 { status = "okay"; };
>  &replicator { status = "okay"; };
> +&stm { status = "okay"; };
>  &tpiu { status = "okay"; };
>  
>  &smd_rpm_regulators {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi 
> b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 402e891a84ab..f02b976480d5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -489,6 +489,26 @@ snoc: interconnect@580000 {
>                                <&rpmcc RPM_SMD_SNOC_A_CLK>;
>               };
>  
> +             stm: stm@802000 {
> +                     compatible = "arm,coresight-stm", "arm,primecell";
> +                     reg = <0x00802000 0x1000>,
> +                           <0x09280000 0x180000>;
> +                     reg-names = "stm-base", "stm-stimulus-base";
> +
> +                     clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> +                     clock-names = "apb_pclk", "atclk";
> +
> +                     status = "disabled";
> +
> +                     out-ports {
> +                             port {
> +                                     stm_out: endpoint {
> +                                             remote-endpoint = 
> <&funnel0_in7>;
> +                                     };
> +                             };
> +                     };
> +             };
> +
>               /* System CTIs */
>               /* CTI 0 - TMC connections */
>               cti0: cti@810000 {
> @@ -562,6 +582,13 @@ funnel0_in4: endpoint {
>                                               remote-endpoint = 
> <&funnel1_out>;
>                                       };
>                               };
> +
> +                             port@7 {
> +                                     reg = <7>;
> +                                     funnel0_in7: endpoint {
> +                                             remote-endpoint = <&stm_out>;
> +                                     };
> +                             };
>                       };
>  
>                       out-ports {
> -- 
> 2.25.1
> 

Reply via email to