Hi Stefan, On Mon, Mar 29, 2021 at 10:01 AM Stefan Riedmueller <s.riedmuel...@phytec.de> wrote: > > The pinmuxing for the enable pin of the usbh1 node is wrong. It needs to > be muxed as GPIO. While at it, move the pinctrl to the vbus regulator > since it is actually the regulator enable pin. > > Signed-off-by: Stefan Riedmueller <s.riedmuel...@phytec.de>
Thanks for the respin: Reviewed-by: Fabio Estevam <feste...@gmail.com>
