Hi Kumar,
Why are you commenting on mpc83xx_wdt with respect to pq1_wdt?
Also, is this driver just for PQ1 platforms or PQ1 & PQ2? If its just
pq1 we should probably call it pq1_wdt*
It should be for pq1, pq2 and pq2pro. However, i only have the possibility
to test this on pq1.
arch/powerpc/platforms/8xx/mpc86xads_setup.c | 5 +
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 5 +
arch/powerpc/sysdev/Makefile | 3 +
arch/powerpc/sysdev/pq_wdt.c | 203
+++++++++++++++++++++++
arch/powerpc/sysdev/pq_wdt.h | 28 ++++
drivers/watchdog/Kconfig | 13 ++-
drivers/watchdog/Makefile | 1 +
drivers/watchdog/pq_wdt.c | 225
++++++++++++++++++++++++++
8 files changed, 482 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/sysdev/pq_wdt.c
create mode 100644 arch/powerpc/sysdev/pq_wdt.h
create mode 100644 drivers/watchdog/pq_wdt.c
What are the bits in sysdev/pq_wdt.{c,h}. Why aren't these just in
drivers/watchdog?
These are the parts needed to boot a device with activated watchdog. If a
bootloader like u-boot activates the watchdog, it can't be deactivated again
and needs to be reset at regular intervals. This is done using a kernel timer.
The driver in drivers/watchdog disables the timer as soon as the wdt device
is opened.
Thanks,
Jochen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
