On Mon, Mar 22, 2021 at 7:55 AM Alex Ghiti <a...@ghiti.fr> wrote:
>
> Le 3/21/21 à 2:06 PM, Vitaly Wool a écrit :
> > Hey Alex,
> >
> > On Sun, Mar 21, 2021 at 4:11 PM Alex Ghiti <a...@ghiti.fr> wrote:
> >>
> >> Hi Vitaly,
> >>
> >> Le 3/10/21 à 4:22 AM, Vitaly Wool a écrit :
> >>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> >>> It allows code to be executed directly from non-volatile storage
> >>> directly addressable by the CPU, such as QSPI NOR flash which can
> >>> be found on many RISC-V platforms. This makes way for significant
> >>> optimization of RAM footprint. The XIP kernel is not compressed
> >>> since it has to run directly from flash, so it will occupy more
> >>> space on the non-volatile storage to The physical flash address
> >>
> >> There seems to be missing something here.
> >
> >
> > Hmmm... strange indeed. I'll come up with a respin shortly and will
> > double check.
> >>
> >>
> >>> used to link the kernel object files and for storing it has to
> >>> be known at compile time and is represented by a Kconfig option.
> >>>
> >>> XIP on RISC-V will currently only work on MMU-enabled kernels.
> >>>
> >>> Signed-off-by: Vitaly Wool <vitaly.w...@konsulko.com>
> >>
> >>
> >> This fails to boot on current for-next with the following panic.
> >> This is because dtb_early_va points to an address that is not mapped in
> >> swapper_pg_dir: using __va(dtb_early_pa) instead works fine.
> >
> > Is it with CONFIG_BUILTIN_DTB or without?
>
> It is without CONFIG_BUILTIN_DTB enabled.
>
> And I noticed I can't link a XIP_KERNEL either:
>
> /home/alex/wip/lpc/buildroot/build_rv64/host/bin/riscv64-buildroot-linux-gnu-ld:
> section .data LMA [0000000000800000,00000000008cd77f] overlaps section
> .rodata LMA [00000000006f61c0,00000000008499a7]
> /home/alex/wip/lpc/buildroot/build_rv64/host/bin/riscv64-buildroot-linux-gnu-ld:
> section .pci_fixup LMA [00000000008499a8,000000000084cfd7] overlaps
> section .data LMA [0000000000800000,00000000008cd77f]
> /home/alex/wip/lpc/buildroot/build_rv64/host/bin/riscv64-buildroot-linux-gnu-ld:
> arch/riscv/mm/init.o: in function `.L138':
> init.c:(.text+0x232): undefined reference to `__init_text_begin'
> /home/alex/wip/lpc/buildroot/build_rv64/host/bin/riscv64-buildroot-linux-gnu-ld:
> arch/riscv/mm/init.o: in function `protect_kernel_text_data':
> init.c:(.text+0x23a): undefined reference to `__init_data_begin'
> /home/alex/wip/lpc/buildroot/build_rv64/host/bin/riscv64-buildroot-linux-gnu-ld:
> init.c:(.text+0x28c): undefined reference to `__init_text_begin'
> /home/alex/wip/lpc/buildroot/build_rv64/host/bin/riscv64-buildroot-linux-gnu-ld:
> init.c:(.text+0x2a0): undefined reference to `__init_data_begin'
> make[2]: *** [Makefile:1197: vmlinux] Error 1
> make[1]: *** [package/pkg-generic.mk:250:
> /home/alex/wip/lpc/buildroot/build_rv64/build/linux-custom/.stamp_built]
> Error 2
> make: *** [Makefile:23: _all] Error 2
>
> The 2 missing symbols are not defined in vmlinux-xip.lds.S and are
> required for CONFIG_STRICT_KERNEL_RWX, I don't think both configs are
> exclusive ? I added them in linker script and that works.
All the executable and read-only parts of an XIP kernel reside in NOR
flash which is read-only when it is in random access mode, so
CONFIG_STRICT_KERNEL_RWX basically has zero value for XIP. And since
NOR flash space is usually quite limited, any option you can avoid
enabling for an XIP kernel should not be enabled.
> But then I'm still blocked with the overlaps, any idea ?
As I've said, flash space is very limited. In a standard RISC-V case
it is 16 MB, and the linker basically assumes we split it 50/50
between RO and RW sections.
Then the first 8 MB of the NOR flash are mapped right before the
standard RAM mapping to create virtually contiguous space of:
* RO/X sections still residing in flash, and
* RW sections that have been copied to the beginning of RAM for them
to actually be RW.
So the idea is simple: you have to slim down your kernel so that RO/X
sections occupy approximately 300K less than they do now :)
Thanks again for the review and for the interest taken,
Best regards,
Vitaly
> >>
> >> And as this likely needs another version, I'm going to add my comments
> >> below.
> >>
> >> [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
> >> [ 0.000000] Machine model: riscv-virtio,qemu
> >> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
> >> [ 0.000000] printk: bootconsole [sbi0] enabled
> >> [ 0.000000] efi: UEFI not found.
> >> [ 0.000000] Unable to handle kernel paging request at virtual address
> >> 0000000040000001
> >> [ 0.000000] Oops [#1]
> >> [ 0.000000] Modules linked in:
> >> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc2 #155
> >> [ 0.000000] Hardware name: riscv-virtio,qemu (DT)
> >> [ 0.000000] epc : fdt_check_header+0x0/0x1fc
> >> [ 0.000000] ra : early_init_dt_verify+0x16/0x6e
> >> [ 0.000000] epc : ffffffe0002b955e ra : ffffffe00082100c sp :
> >> ffffffe001203f10
> >> [ 0.000000] gp : ffffffe0012e40b8 tp : ffffffe00120bd80 t0 :
> >> ffffffe23fdf7000
> >> [ 0.000000] t1 : 0000000000000000 t2 : 0000000000000000 s0 :
> >> ffffffe001203f30
> >> [ 0.000000] s1 : 0000000040000000 a0 : 0000000040000000 a1 :
> >> 00000002bfffffff
> >> [ 0.000000] a2 : ffffffe23fdf6f00 a3 : 0000000000000001 a4 :
> >> 0000000000000018
> >> [ 0.000000] a5 : ffffffe000a0b5e8 a6 : ffffffe23fdf6ef0 a7 :
> >> 0000000000000018
> >> [ 0.000000] s2 : 0000000080000200 s3 : 0000000000000fff s4 :
> >> ffffffe000a0a958
> >> [ 0.000000] s5 : 0000000000000005 s6 : 0000000000000140 s7 :
> >> ffffffe23fdf6ec0
> >> [ 0.000000] s8 : 0000000081000200 s9 : 0000000080000200 s10:
> >> ffffffe000a01000
> >> [ 0.000000] s11: 0000000000000fff t3 : ffffffffbfff7000 t4 :
> >> ffffffffffffffff
> >> [ 0.000000] t5 : 0000000080e00000 t6 : 0000000080202000
> >> [ 0.000000] status: 0000000000000100 badaddr: 0000000040000001 cause:
> >> 000000000000000d
> >> [ 0.000000] Call Trace:
> >> [ 0.000000] [<ffffffe0002b955e>] fdt_check_header+0x0/0x1fc
> >> [ 0.000000] [<ffffffe000802af2>] setup_arch+0x3a6/0x412
> >> [ 0.000000] [<ffffffe0008006ea>] start_kernel+0x7e/0x580
> >> [ 0.000000] random: get_random_bytes called from
> >> print_oops_end_marker+0x22/0x44 with crng_init=0
> >> [ 0.000000] ---[ end trace 0000000000000000 ]---
> >> [ 0.000000] Kernel panic - not syncing: Fatal exception
> >> [ 0.000000] ---[ end Kernel panic - not syncing: Fatal exception ]---
> >>
> >>>
> >>> ---
> >>> Changes in v2:
> >>> - dedicated macro for XIP address fixup when MMU is not enabled yet
> >>> o both for 32-bit and 64-bit RISC-V
> >>> - SP is explicitly set to a safe place in RAM before __copy_data call
> >>> - removed redundant alignment requirements in vmlinux-xip.lds.S
> >>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >>> Changes in v3:
> >>> - rebased against latest for-next
> >>> - XIP address fixup macro now takes an argument
> >>> - SMP related fixes
> >>> Changes in v4:
> >>> - rebased against the current for-next
> >>> - less #ifdef's in C/ASM code
> >>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> >>> - C-specific definitions moved into #ifndef __ASSEMBLY__
> >>> - Fixed multi-core boot
> >>> Changes in v5:
> >>> - fixed build error for non-XIP kernels
> >>>
> >>> arch/riscv/Kconfig | 44 +++++++++-
> >>> arch/riscv/Makefile | 8 +-
> >>> arch/riscv/boot/Makefile | 13 +++
> >>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> >>> arch/riscv/kernel/cpu_ops_sbi.c | 12 ++-
> >>> arch/riscv/kernel/head.S | 59 ++++++++++++-
> >>> arch/riscv/kernel/head.h | 3 +
> >>> arch/riscv/kernel/setup.c | 8 +-
> >>> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
> >>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> >>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> >>> 11 files changed, 432 insertions(+), 18 deletions(-)
> >>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >>>
> >>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>> index 85d626b8ce5e..59fb945a900e 100644
> >>> --- a/arch/riscv/Kconfig
> >>> +++ b/arch/riscv/Kconfig
> >>> @@ -438,7 +438,7 @@ config EFI_STUB
> >>>
> >>> config EFI
> >>> bool "UEFI runtime support"
> >>> - depends on OF
> >>> + depends on OF && !XIP_KERNEL
> >>> select LIBFDT
> >>> select UCS2_STRING
> >>> select EFI_PARAMS_FROM_FDT
> >>> @@ -462,11 +462,51 @@ config STACKPROTECTOR_PER_TASK
> >>> def_bool y
> >>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >>>
> >>> +config XIP_KERNEL
> >>> + bool "Kernel Execute-In-Place from ROM"
> >>> + depends on MMU
> >>> + help
> >>> + Execute-In-Place allows the kernel to run from non-volatile
> >>> storage
> >>> + directly addressable by the CPU, such as NOR flash. This saves RAM
> >>> + space since the text section of the kernel is not loaded from
> >>> flash
> >>> + to RAM. Read-write sections, such as the data section and stack,
> >>> + are still copied to RAM. The XIP kernel is not compressed since
> >>> + it has to run directly from flash, so it will take more space to
> >>> + store it. The flash address used to link the kernel object files,
> >>> + and for storing it, is configuration dependent. Therefore, if you
> >>> + say Y here, you must know the proper physical address where to
> >>> + store the kernel image depending on your own flash memory usage.
> >>> +
> >>> + Also note that the make target becomes "make xipImage" rather than
> >>> + "make zImage" or "make Image". The final kernel binary to put in
> >>> + ROM memory will be arch/riscv/boot/xipImage.
> >>> +
> >>> + If unsure, say N.
> >>> +
> >>> +config XIP_PHYS_ADDR
> >>> + hex "XIP Kernel Physical Location"
> >>> + depends on XIP_KERNEL
> >>> + default "0x21000000"
> >>> + help
> >>> + This is the physical address in your flash memory the kernel will
> >>> + be linked for and stored to. This address is dependent on your
> >>> + own flash usage.
> >>> +
> >>> +config XIP_PHYS_RAM_BASE
> >>> + hex "Platform Physical RAM address"
> >>> + depends on XIP_KERNEL
> >>> + default "0x80000000"
> >>> + help
> >>> + This is the physical address of RAM in the system. It has to be
> >>> + explicitly specified to run early relocations of read-write data
> >>> + from flash to RAM.
> >>
> >> This is not XIP specific and this is something I considered to add in
> >> order to map the linear mapping with hugepages, maybe simply rename this
> >> without XIP_ prefix.
> >
> > Sure, let's just go with PHYS_RAM_BASE. I was reluctant to add yet
> > another constant at first but having to derive it in runtime led to
> > overly complicated calculations which could not be compile time
> > optimized, so here it came.
> >
> >>> +
> >>> endmenu
> >>>
> >>> config BUILTIN_DTB
> >>> - def_bool n
> >>> + bool
> >>> depends on OF
> >>> + default y if XIP_KERNEL
> >>>
> >>> menu "Power management options"
> >>>
> >>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> >>> index 1368d943f1f3..8fcbec03974d 100644
> >>> --- a/arch/riscv/Makefile
> >>> +++ b/arch/riscv/Makefile
> >>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >>>
> >>> # Default target when executing plain make
> >>> boot := arch/riscv/boot
> >>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>> +KBUILD_IMAGE := $(boot)/xipImage
> >>> +else
> >>> KBUILD_IMAGE := $(boot)/Image.gz
> >>> +endif
> >>>
> >>> head-y := arch/riscv/kernel/head.o
> >>>
> >>> @@ -95,12 +99,14 @@ PHONY += vdso_install
> >>> vdso_install:
> >>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >>>
> >>> +ifneq ($(CONFIG_XIP_KERNEL),y)
> >>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> >>> KBUILD_IMAGE := $(boot)/loader.bin
> >>> else
> >>> KBUILD_IMAGE := $(boot)/Image.gz
> >>> endif
> >>> -BOOT_TARGETS := Image Image.gz loader loader.bin
> >>> +endif
> >>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >>>
> >>> all: $(notdir $(KBUILD_IMAGE))
> >>>
> >>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> >>> index 03404c84f971..6bf299f70c27 100644
> >>> --- a/arch/riscv/boot/Makefile
> >>> +++ b/arch/riscv/boot/Makefile
> >>> @@ -17,8 +17,21 @@
> >>> KCOV_INSTRUMENT := n
> >>>
> >>> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R
> >>> .comment -S
> >>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R
> >>> .comment -S
> >>>
> >>> targets := Image Image.* loader loader.o loader.lds loader.bin
> >>> +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> >>> +
> >>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>> +
> >>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> >>> +cmd_mkxip = $(cmd_objcopy)
> >>> +
> >>> +$(obj)/xipImage: vmlinux FORCE
> >>> + $(call if_changed,mkxip)
> >>> + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> >>> +
> >>> +endif
> >>>
> >>> $(obj)/Image: vmlinux FORCE
> >>> $(call if_changed,objcopy)
> >>> diff --git a/arch/riscv/include/asm/pgtable.h
> >>> b/arch/riscv/include/asm/pgtable.h
> >>> index ebf817c1bdf4..4c2e6902f2b8 100644
> >>> --- a/arch/riscv/include/asm/pgtable.h
> >>> +++ b/arch/riscv/include/asm/pgtable.h
> >>> @@ -11,6 +11,33 @@
> >>>
> >>> #include <asm/pgtable-bits.h>
> >>>
> >>> +#ifdef CONFIG_MMU
> >>> +
> >>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>> +
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> >>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> >>> +
> >>> +#define XIP_OFFSET SZ_8M
> >>> +#define XIP_MASK (SZ_8M - 1)
> >>> +#define XIP_VIRT_ADDR(physaddr) \
> >>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> >>> +
> >>> +#else
> >>> +
> >>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>> +#define VMALLOC_END (PAGE_OFFSET - 1)
> >>> +
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> +
> >>> +#else
> >>> +
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> +#endif /* CONFIG_MMU */
> >>> +
> >>> #ifndef __ASSEMBLY__
> >>>
> >>> /* Page Upper Directory not used in RISC-V */
> >>> @@ -21,9 +48,25 @@
> >>>
> >>> #ifdef CONFIG_MMU
> >>>
> >>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>> -#define VMALLOC_END (PAGE_OFFSET - 1)
> >>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +/*
> >>> + * Since we use sections to map it, this macro replaces the physical
> >>> address
> >>> + * with its virtual address while keeping offset from the base section.
> >>
> >> It seems the comment should be the other way around: "this macro
> >> replaces the *virtual* address...etc".
>
> Isn't there an issue with the comment here ?
>
> >>
> >>> + */
> >>> +#define XIP_PHYS_ADDR(va) \
> >>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> >>> +
> >>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>> +#define __PHRAM_BASE CONFIG_XIP_PHYS_RAM_BASE
> >>
> >> I don't think that it is necessary to define this intermediate
> >> __PHRAM_BASE.
> >
> > That was for the sake of keeping shorter lines. :)
> >
> >>> +
> >>> +#define XIP_FIXUP(addr) \
> >>> + (((uintptr_t)(addr) >= CONFIG_XIP_PHYS_ADDR && \
> >>> + (uintptr_t)(addr) <= CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> >>
> >> That should be < CONFIG_XIP_PHYS_ADDR + SZ_16M, not <=.
> >
> > Thanks, will fix.
> >
> >>> + (uintptr_t)(addr) - CONFIG_XIP_PHYS_ADDR + __PHRAM_BASE -
> >>> XIP_OFFSET : \
> >>> + (uintptr_t)(addr))
> >>
> >> There are possible side-effects in this macro definition, consider using
> >> a temporary variable for addr.
> >
> > This is an internal definition so I didn't care much but FWIW it's
> > better to change it as you suggest, thanks.
> >
> >>> +#else
> >>> +#define XIP_FIXUP(addr) (addr)
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>>
> >>> #define BPF_JIT_REGION_SIZE (SZ_128M)
> >>> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> >>> @@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct
> >>> vm_area_struct *vma,
> >>>
> >>> #define kern_addr_valid(addr) (1) /* FIXME */
> >>>
> >>> -extern void *dtb_early_va;
> >>> -extern uintptr_t dtb_early_pa;
> >>> +extern void *_dtb_early_va;
> >>> +extern uintptr_t _dtb_early_pa;
> >>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> >>
> >> CONFIG_XIP_KERNEL already depends on CONFIG_MMU. And maybe we could
> >> handle XIP_KERNEL and !XIP_KERNEL in XIP_FIXUP to avoid those ifdefs ?
> >
> > This is a temporary dependence, we are working on the non-MMU case too
> > so I would not like to go that path.
> >
> >>> +
> >>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> >>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> >>> +
> >>> +#else
> >>> +
> >>> +#define dtb_early_va _dtb_early_va
> >>> +#define dtb_early_pa _dtb_early_pa
> >>> +
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> +
> >>> void setup_bootmem(void);
> >>> void paging_init(void);
> >>> void misc_mem_init(void);
> >>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
> >>> b/arch/riscv/kernel/cpu_ops_sbi.c
> >>> index 685fae72b7f5..7d368bc656ff 100644
> >>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> >>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> >>> @@ -53,10 +53,20 @@ static int sbi_hsm_hart_get_status(unsigned long
> >>> hartid)
> >>> }
> >>> #endif
> >>>
> >>> +static inline unsigned long get_secondary_start_phys(void)
> >>> +{
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + return XIP_PHYS_ADDR(secondary_start_sbi);
> >>> +#else
> >>> + return __pa_symbol(secondary_start_sbi);
> >>> +#endif
> >>> +}
> >>> +
> >>> +
> >>
> >> There are 2 newlines here.
> >>
> >>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> >>> {
> >>> int rc;
> >>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> >>> + unsigned long boot_addr = get_secondary_start_phys();
> >>> int hartid = cpuid_to_hartid_map(cpuid);
> >>>
> >>> cpu_update_secondary_bootdata(cpuid, tidle);
> >>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> >>> index f5a9bad86e58..17ecf6095209 100644
> >>> --- a/arch/riscv/kernel/head.S
> >>> +++ b/arch/riscv/kernel/head.S
> >>> @@ -9,11 +9,33 @@
> >>> #include <linux/linkage.h>
> >>> #include <asm/thread_info.h>
> >>> #include <asm/page.h>
> >>> +#include <asm/pgtable.h>
> >>> #include <asm/csr.h>
> >>> #include <asm/hwcap.h>
> >>> #include <asm/image.h>
> >>> #include "efi-header.S"
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +.macro XIP_FIXUP_OFFSET reg
> >>> +#ifdef CONFIG_64BIT
> >>> + ld t0, _xip_fixup
> >>> +#else
> >>> + lw t0, _xip_fixup
> >>> +#endif
> >>
> >> Use REG_L here.
> >
> > Will do, thanks.
> >
> >>> + add \reg, \reg, t0
> >>> +.endm
> >>> +
> >>> +_xip_fixup:
> >>> +#ifdef CONFIG_64BIT
> >>> + .dword CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> >>> +#else
> >>> + .word CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> >>> +#endif
> >>> +#else
> >>> +.macro XIP_FIXUP_OFFSET reg
> >>> +.endm
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> +
> >>> __HEAD
> >>> ENTRY(_start)
> >>> /*
> >>> @@ -69,7 +91,11 @@ pe_head_start:
> >>> #ifdef CONFIG_MMU
> >>> relocate:
> >>> /* Relocate return address */
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>> +#else
> >>> li a1, PAGE_OFFSET
> >>> +#endif
> >>> la a2, _start
> >>> sub a1, a1, a2
> >>> add ra, ra, a1
> >>> @@ -91,6 +117,7 @@ relocate:
> >>> * to ensure the new translations are in use.
> >>> */
> >>> la a0, trampoline_pg_dir
> >>> + XIP_FIXUP_OFFSET a0
> >>
> >>
> >> For all those pairs of la aX...; XIP_FIXUP_OFFSET aX...; maybe introduce
> >> a macro that does both ?
> >
> > I can do that but wouldn't it obscure the operations too much?
> >
>
> IMHO, this would avoid to break XIP_KERNEL if we don't have to worry
> about those fixup, because as this adds a new kernel, I'm a bit worried
> we break it over time easily.
>
> >>> srl a0, a0, PAGE_SHIFT
> >>> or a0, a0, a1
> >>> sfence.vma
> >>> @@ -144,7 +171,9 @@ secondary_start_sbi:
> >>>
> >>> slli a3, a0, LGREG
> >>> la a4, __cpu_up_stack_pointer
> >>> + XIP_FIXUP_OFFSET a4
> >>> la a5, __cpu_up_task_pointer
> >>> + XIP_FIXUP_OFFSET a5
> >>> add a4, a3, a4
> >>> add a5, a3, a5
> >>> REG_L sp, (a4)
> >>> @@ -156,6 +185,7 @@ secondary_start_common:
> >>> #ifdef CONFIG_MMU
> >>> /* Enable virtual memory and relocate to virtual address */
> >>> la a0, swapper_pg_dir
> >>> + XIP_FIXUP_OFFSET a0
> >>> call relocate
> >>> #endif
> >>> call setup_trap_vector
> >>> @@ -236,12 +266,33 @@ pmp_done:
> >>> .Lgood_cores:
> >>> #endif
> >>>
> >>> +#ifndef CONFIG_XIP_KERNEL
> >>> /* Pick one hart to run the main boot sequence */
> >>> la a3, hart_lottery
> >>> li a2, 1
> >>> amoadd.w a3, a2, (a3)
> >>> bnez a3, .Lsecondary_start
> >>>
> >>> +#else
> >>> + /* hart_lottery in flash contains a magic number */
> >>> + la a3, hart_lottery
> >>> + mv a2, a3
> >>> + XIP_FIXUP_OFFSET a2
> >>> + lw t1, (a3)
> >>> + amoswap.w t0, t1, (a2)
> >>> + /* first time here if hart_lottery in RAM is not set */
> >>> + beq t0, t1, .Lsecondary_start
> >>> +
> >>> + la sp, _end + THREAD_SIZE
> >>> + XIP_FIXUP_OFFSET sp
> >>> + mv s0, a0
> >>> + call __copy_data
> >>> +
> >>> + /* Restore a0 copy */
> >>> + mv a0, s0
> >>> +#endif
> >>> +
> >>> +#ifndef CONFIG_XIP_KERNEL
> >>> /* Clear BSS for flat non-ELF images */
> >>> la a3, __bss_start
> >>> la a4, __bss_stop
> >>> @@ -251,15 +302,18 @@ clear_bss:
> >>> add a3, a3, RISCV_SZPTR
> >>> blt a3, a4, clear_bss
> >>> clear_bss_done:
> >>> -
> >>> +#endif
> >>> /* Save hart ID and DTB physical address */
> >>> mv s0, a0
> >>> mv s1, a1
> >>> +
> >>> la a2, boot_cpu_hartid
> >>> + XIP_FIXUP_OFFSET a2
> >>> REG_S a0, (a2)
> >>>
> >>> /* Initialize page tables and relocate to virtual addresses */
> >>> la sp, init_thread_union + THREAD_SIZE
> >>> + XIP_FIXUP_OFFSET sp
> >>> #ifdef CONFIG_BUILTIN_DTB
> >>> la a0, __dtb_start
> >>> #else
> >>> @@ -268,6 +322,7 @@ clear_bss_done:
> >>> call setup_vm
> >>> #ifdef CONFIG_MMU
> >>> la a0, early_pg_dir
> >>> + XIP_FIXUP_OFFSET a0
> >>> call relocate
> >>> #endif /* CONFIG_MMU */
> >>>
> >>> @@ -292,7 +347,9 @@ clear_bss_done:
> >>>
> >>> slli a3, a0, LGREG
> >>> la a1, __cpu_up_stack_pointer
> >>> + XIP_FIXUP_OFFSET a1
> >>> la a2, __cpu_up_task_pointer
> >>> + XIP_FIXUP_OFFSET a2
> >>> add a1, a3, a1
> >>> add a2, a3, a2
> >>>
> >>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> >>> index b48dda3d04f6..aabbc3ac3e48 100644
> >>> --- a/arch/riscv/kernel/head.h
> >>> +++ b/arch/riscv/kernel/head.h
> >>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >>>
> >>> asmlinkage void do_page_fault(struct pt_regs *regs);
> >>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +asmlinkage void __init __copy_data(void);
> >>> +#endif
> >>>
> >>> extern void *__cpu_up_stack_pointer[];
> >>> extern void *__cpu_up_task_pointer[];
> >>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> >>> index e85bacff1b50..29956c41a9cc 100644
> >>> --- a/arch/riscv/kernel/setup.c
> >>> +++ b/arch/riscv/kernel/setup.c
> >>> @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> >>> * This is used before the kernel initializes the BSS so it can't be
> >>> in the
> >>> * BSS.
> >>> */
> >>> -atomic_t hart_lottery __section(".sdata");
> >>> +atomic_t hart_lottery __section(".sdata")
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> += ATOMIC_INIT(0xC001BEEF)
> >>> +#endif
> >>> +;
> >>> unsigned long boot_cpu_hartid;
> >>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >>>
> >>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> >>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> >>> unflatten_and_copy_device_tree();
> >>> #else
> >>> - if (early_init_dt_verify(__va(dtb_early_pa)))
> >>> + if (early_init_dt_verify(dtb_early_va))
> >>> unflatten_device_tree();
> >>> else
> >>> pr_err("No DTB found in kernel mappings\n");
> >>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
> >>> b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>> new file mode 100644
> >>> index 000000000000..9f0f08c34cd3
> >>> --- /dev/null
> >>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>> @@ -0,0 +1,132 @@
> >>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>> +/*
> >>> + * Copyright (C) 2012 Regents of the University of California
> >>> + * Copyright (C) 2017 SiFive
> >>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> >>> + */
> >>> +
> >>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>> +/* No __ro_after_init data in the .rodata section - which will always be
> >>> ro */
> >>> +#define RO_AFTER_INIT_DATA
> >>> +
> >>> +#include <asm/vmlinux.lds.h>
> >>> +#include <asm/page.h>
> >>> +#include <asm/pgtable.h>
> >>> +#include <asm/cache.h>
> >>> +#include <asm/thread_info.h>
> >>> +
> >>> +OUTPUT_ARCH(riscv)
> >>> +ENTRY(_start)
> >>> +
> >>> +jiffies = jiffies_64;
> >>> +
> >>> +SECTIONS
> >>> +{
> >>> + /* Beginning of code and text segment */
> >>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> >>> + _xiprom = .;
> >>> + _start = .;
> >>> + HEAD_TEXT_SECTION
> >>> + INIT_TEXT_SECTION(PAGE_SIZE)
> >>> + /* we have to discard exit text and such at runtime, not link time
> >>> */
> >>> + .exit.text :
> >>> + {
> >>> + EXIT_TEXT
> >>> + }
> >>> +
> >>> + .text : {
> >>> + _text = .;
> >>> + _stext = .;
> >>> + TEXT_TEXT
> >>> + SCHED_TEXT
> >>> + CPUIDLE_TEXT
> >>> + LOCK_TEXT
> >>> + KPROBES_TEXT
> >>> + ENTRY_TEXT
> >>> + IRQENTRY_TEXT
> >>> + SOFTIRQENTRY_TEXT
> >>> + *(.fixup)
> >>> + _etext = .;
> >>> + }
> >>> + RO_DATA(L1_CACHE_BYTES)
> >>> + .srodata : {
> >>> + *(.srodata*)
> >>> + }
> >>> + .init.rodata : {
> >>> + INIT_SETUP(16)
> >>> + INIT_CALLS
> >>> + CON_INITCALL
> >>> + INIT_RAM_FS
> >>> + }
> >>> + _exiprom = .; /* End of XIP ROM area */
> >>> +
> >>> +
> >>> +/*
> >>> + * From this point, stuff is considered writable and will be copied to
> >>> RAM
> >>> + */
> >>> + __data_loc = ALIGN(16); /* location in file */
> >>> + . = PAGE_OFFSET; /* location in memory */
> >>> +
> >>> + _sdata = .; /* Start of data section */
> >>> + _data = .;
> >>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> >>> + _edata = .;
> >>> + __start_ro_after_init = .;
> >>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> >>> + *(.data..ro_after_init)
> >>> + }
> >>> + __end_ro_after_init = .;
> >>> +
> >>> + . = ALIGN(PAGE_SIZE);
> >>> + __init_begin = .;
> >>> + .init.data : {
> >>> + INIT_DATA
> >>> + }
> >>> + .exit.data : {
> >>> + EXIT_DATA
> >>> + }
> >>> + . = ALIGN(8);
> >>> + __soc_early_init_table : {
> >>> + __soc_early_init_table_start = .;
> >>> + KEEP(*(__soc_early_init_table))
> >>> + __soc_early_init_table_end = .;
> >>> + }
> >>> + __soc_builtin_dtb_table : {
> >>> + __soc_builtin_dtb_table_start = .;
> >>> + KEEP(*(__soc_builtin_dtb_table))
> >>> + __soc_builtin_dtb_table_end = .;
> >>> + }
> >>> + PERCPU_SECTION(L1_CACHE_BYTES)
> >>> +
> >>> + . = ALIGN(PAGE_SIZE);
> >>> + __init_end = .;
> >>> +
> >>> + .sdata : {
> >>> + __global_pointer$ = . + 0x800;
> >>> + *(.sdata*)
> >>> + *(.sbss*)
> >>> + }
> >>> +
> >>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> >>> + EXCEPTION_TABLE(0x10)
> >>> +
> >>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> >>> + *(.rel.dyn*)
> >>> + }
> >>> +
> >>> + /*
> >>> + * End of copied data. We need a dummy section to get its LMA.
> >>> + * Also located before final ALIGN() as trailing padding is not
> >>> stored
> >>> + * in the resulting binary file and useless to copy.
> >>> + */
> >>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> >>> + _edata_loc = LOADADDR(.data.endmark);
> >>> +
> >>> + . = ALIGN(PAGE_SIZE);
> >>> + _end = .;
> >>> +
> >>> + STABS_DEBUG
> >>> + DWARF_DEBUG
> >>> +
> >>> + DISCARDS
> >>> +}
> >>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
> >>> b/arch/riscv/kernel/vmlinux.lds.S
> >>> index de03cb22d0e9..6745ec325930 100644
> >>> --- a/arch/riscv/kernel/vmlinux.lds.S
> >>> +++ b/arch/riscv/kernel/vmlinux.lds.S
> >>> @@ -4,7 +4,12 @@
> >>> * Copyright (C) 2017 SiFive
> >>> */
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +#include "vmlinux-xip.lds.S"
> >>> +#else
> >>> +
> >>> #define LOAD_OFFSET PAGE_OFFSET
> >>> +
> >>> #include <asm/vmlinux.lds.h>
> >>> #include <asm/page.h>
> >>> #include <asm/cache.h>
> >>> @@ -132,3 +137,4 @@ SECTIONS
> >>>
> >>> DISCARDS
> >>> }
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> >>> index 067583ab1bd7..b5ac455cb159 100644
> >>> --- a/arch/riscv/mm/init.c
> >>> +++ b/arch/riscv/mm/init.c
> >>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >>>
> >>> extern char _start[];
> >>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> >>> -void *dtb_early_va __initdata;
> >>> -uintptr_t dtb_early_pa __initdata;
> >>> +void *_dtb_early_va __initdata;
> >>> +uintptr_t _dtb_early_pa __initdata;
> >>>
> >>> struct pt_alloc_ops {
> >>> pte_t *(*get_pte_virt)(phys_addr_t pa);
> >>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> >>> (unsigned long)VMALLOC_END);
> >>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> >>> (unsigned long)high_memory);
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> >>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> }
> >>> #else
> >>> static void print_vm_layout(void) { }
> >>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> >>> phys_addr_t dram_end = memblock_end_of_DRAM();
> >>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + vmlinux_start = __pa_symbol(&_sdata);
> >>> +#endif
> >>
> >> Nit: I would use IS_ENABLED(CONFIG_XIP_KERNEL) to avoid double
> >> assignment in case CONFIG_XIP_KERNEL is set.
> >>
> >>> +
> >>> /* The maximal physical memory size is -PAGE_OFFSET. */
> >>> memblock_enforce_memory_limit(-PAGE_OFFSET);
> >>>
> >>> @@ -148,11 +156,27 @@ void __init setup_bootmem(void)
> >>> memblock_allow_resize();
> >>> }
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +
> >>> +extern char _xiprom[], _exiprom[];
> >>> +extern char _sdata[], _edata[];
> >>> +
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> +
> >>> #ifdef CONFIG_MMU
> >>> -static struct pt_alloc_ops pt_ops;
> >>> +static struct pt_alloc_ops _pt_ops;
> >>> +
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> >>> +#else
> >>> +#define pt_ops _pt_ops
> >>> +#endif
> >>>
> >>> unsigned long va_pa_offset;
> >>> EXPORT_SYMBOL(va_pa_offset);
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> >>> +#endif
> >>> unsigned long pfn_base;
> >>> EXPORT_SYMBOL(pfn_base);
> >>>
> >>> @@ -162,6 +186,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> >>>
> >>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> >>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> >>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> +
> >>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t
> >>> prot)
> >>> {
> >>> unsigned long addr = __fix_to_virt(idx);
> >>> @@ -237,6 +267,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> >>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> >>> +
> >>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> >>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> >>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> >>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> >>> +#endif /* CONFIG_XIP_KERNEL */
> >>> +
> >>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> >>> {
> >>> /* Before MMU is enabled */
> >>> @@ -353,6 +392,19 @@ static uintptr_t __init best_map_size(phys_addr_t
> >>> base, phys_addr_t size)
> >>> return PMD_SIZE;
> >>> }
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> +/* called from head.S with MMU off */
> >>> +asmlinkage void __init __copy_data(void)
> >>> +{
> >>> + void *from = (void *)(&_sdata);
> >>> + void *end = (void *)(&_end);
> >>> + void *to = (void *)CONFIG_XIP_PHYS_RAM_BASE;
> >>> + size_t sz = (size_t)(end - from);
> >>> +
> >>> + memcpy(to, from, sz);
> >>> +}
> >>> +#endif
> >>> +
> >>> /*
> >>> * setup_vm() is called from head.S with MMU-off.
> >>> *
> >>> @@ -373,7 +425,8 @@ static uintptr_t __init best_map_size(phys_addr_t
> >>> base, phys_addr_t size)
> >>>
> >>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>> {
> >>> - uintptr_t va, pa, end_va;
> >>> + uintptr_t va, end_va;
> >>> + uintptr_t __maybe_unused pa;
> >>> uintptr_t load_pa = (uintptr_t)(&_start);
> >>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> >>> uintptr_t map_size;
> >>> @@ -381,6 +434,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> >>> #endif
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> >>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>> (uintptr_t)(&_xiprom);
> >>> +
> >>> + load_pa = (uintptr_t)CONFIG_XIP_PHYS_RAM_BASE;
> >>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> >>> +#endif
> >>> va_pa_offset = PAGE_OFFSET - load_pa;
> >>> pfn_base = PFN_DOWN(load_pa);
> >>>
> >>> @@ -419,6 +479,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> >>> #endif
> >>>
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> >>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> >>> + for (va = XIP_VIRT_ADDR_START;
> >>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>> + va += PMD_SIZE) {
> >>> + create_pmd_mapping(xip_pmd, va,
> >>> + xiprom + (va - XIP_VIRT_ADDR_START),
> >>> + PMD_SIZE, PAGE_KERNEL_EXEC);
> >>> + }
> >>> +
> >>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> >>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> >>> +#endif
> >>> +
> >>> /*
> >>> * Setup early PGD covering entire kernel which will allows
> >>> * us to reach paging_init(). We map all memory banks later
> >>> @@ -443,7 +518,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> >>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE -
> >>> 1));
> >>> #else /* CONFIG_BUILTIN_DTB */
> >>> - dtb_early_va = __va(dtb_pa);
> >>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>> #endif /* CONFIG_BUILTIN_DTB */
> >>> #else
> >>> #ifndef CONFIG_BUILTIN_DTB
> >>> @@ -455,7 +530,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> >>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE -
> >>> 1));
> >>> #else /* CONFIG_BUILTIN_DTB */
> >>> - dtb_early_va = __va(dtb_pa);
> >>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>> #endif /* CONFIG_BUILTIN_DTB */
> >>> #endif
> >>> dtb_early_pa = dtb_pa;
> >>> @@ -496,6 +571,9 @@ static void __init setup_vm_final(void)
> >>> uintptr_t va, map_size;
> >>> phys_addr_t pa, start, end;
> >>> u64 i;
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>> (uintptr_t)(&_xiprom);
> >>> +#endif
> >>>
> >>> /**
> >>> * MMU is enabled at this point. But page table setup is not
> >>> complete yet.
> >>> @@ -527,6 +605,16 @@ static void __init setup_vm_final(void)
> >>> map_size, PAGE_KERNEL_EXEC);
> >>> }
> >>> }
> >>> +#ifdef CONFIG_XIP_KERNEL
> >>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> >>> + for (va = XIP_VIRT_ADDR_START;
> >>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>> + va += map_size)
> >>> + create_pgd_mapping(swapper_pg_dir, va,
> >>> + CONFIG_XIP_PHYS_ADDR + (va -
> >>> XIP_VIRT_ADDR_START),
> >>> + map_size, PAGE_KERNEL_EXEC);
> >>> +
> >>> +#endif
> >>>
> >>> /* Clear fixmap PTE and PMD mappings */
> >>> clear_fixmap(FIX_PTE);
> >>>
> >>
> >> And I'm not sure I understand which variables are required to be fixup,
> >> can you explain it a bit more please ?
> >
> > On a high level, all the RW sections are copied to RAM but while the
> > MMU is not enabled, we are dealing with the addresses in the NOR flash
> > all the way. To read and modify the RAM versions of variables we do
> > this XIP_FIXUP thing.
>
> Ok thanks, we'll need to be extra careful when touching the pre-mmu zone
> then.
>
> >
> > Please come back if this explanation is not clear enough.
> >
> >> And finally, how can we try XIP_KERNEL on qemu ?
> >
> > It works with Polarfire Icicle emulation. I'm using the folllowing
> > command line for testing it:
> > qemu-system-riscv64 -M microchip-icicle-kit -bios
> > work/hart-software-services/hss.bin -smp 5 -drive
> > if=sd,format=raw,file=sd1.img -nic user,model=cadence_gem -display
> > none -serial null -chardev
> > socket,id=serial1,path=/tmp/serial1.sock,server -serial
> > chardev:serial1 -device loader,addr=0x21000000,file=xipImage -D
> > qemu.log -monitor stdio
> >
>
> Thanks for the qemu command line !
>
> > Thanks a lot for the review,
> >
> > Best regards,
> > Vitaly
>
> Thanks,
>
> Alex
>
> >
> > _______________________________________________
> > linux-riscv mailing list
> > linux-ri...@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
> >
