On 10-03-21, 16:31, Caleb Connolly wrote:
> Hook up the SMMU for doing DMA over i2c. Some peripherals like
> touchscreens easily exceed 32-bytes per transfer, causing errors and
> lockups without this.
Why not squash this to patch 1..?
>
> Signed-off-by: Caleb Connolly <ca...@connolly.tech>
> ---
> Fixes i2c on the OnePlus 7, without this touching the screen with more
> than 4 fingers causes the device to lock up and reboot.
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 03e05d98daf2..543417d74216 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -583,6 +583,7 @@ qupv3_id_0: geniqup@8c0000 {
> clock-names = "m-ahb", "s-ahb";
> clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + iommus = <&apps_smmu 0xc3 0x0>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> @@ -595,6 +596,7 @@ qupv3_id_1: geniqup@ac0000 {
> clock-names = "m-ahb", "s-ahb";
> clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x603 0x0>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> @@ -617,6 +619,7 @@ qupv3_id_2: geniqup@cc0000 {
> clock-names = "m-ahb", "s-ahb";
> clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
> <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x7a3 0x0>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> --
> 2.29.2
>
--
~Vinod
