I try to setup a user mode linux session and dmesg says:
"[cut]
ubda: unknown partition table
Choosing a random ethernet address for device eth0
Netdevice 0 (9e:69:a0:f3:f1:f0) : TUN/TAP backend - IP = 192.168.5.1
Filesystem "ubda": Disabling barriers, not supported by the underlying device
[cut]"
id est eth0.
But the network device is:
# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth6: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
id est eth6
# uname -a
Linux localhost 2.6.24-rc7-gd0c4c9d4 #1 Sat Jan 12 13:25:44 CET 2008 i686 UML
User Mode Linux GNU/Linux
Any ideas what could be wrong here?
mfg
thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
