On Tue, Feb 23, 2021 at 07:33:43PM +0100, Sebastian Reichel wrote:
> Add VBUS regulator GPIO information, so that USB OTG port can
> also be used in host mode.
>
> Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.com>
'ARM: dts: imx6q-ba16: ' this style for prefix maybe?
> ---
> arch/arm/boot/dts/imx6q-ba16.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi
> b/arch/arm/boot/dts/imx6q-ba16.dtsi
> index e4578ed3371e..4793ef5171aa 100644
> --- a/arch/arm/boot/dts/imx6q-ba16.dtsi
> +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
> @@ -124,6 +124,10 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
> regulator-name = "usb_otg_vbus";
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
> +
This is newline is not necessary.
Shawn
> + pinctrl-0 = <&pinctrl_usbotg_vbus>;
> + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> };
> };
>
> @@ -575,6 +579,12 @@ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
> >;
> };
>
> + pinctrl_usbotg_vbus: usbotgvbusgrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
> + >;
> + };
> +
> pinctrl_usdhc2: usdhc2grp {
> fsl,pins = <
> MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
> --
> 2.30.0
>
