This was overlooked earlier, fix it to ensure the busses can work properly.
Signed-off-by: Konrad Dybcio <[email protected]> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index a5a06afc2c94..fccfc4e9f69d 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -941,96 +941,112 @@ pinconf-rx-cts-rts { i2c1_default: i2c1-default { pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; drive-strength = <2>; bias-disable; }; i2c1_sleep: i2c1-sleep { pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; drive-strength = <2>; bias-pull-up; }; i2c2_default: i2c2-default { pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; drive-strength = <2>; bias-disable; }; i2c2_sleep: i2c2-sleep { pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; drive-strength = <2>; bias-pull-up; }; i2c3_default: i2c3-default { pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; drive-strength = <2>; bias-disable; }; i2c3_sleep: i2c3-sleep { pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; drive-strength = <2>; bias-pull-up; }; i2c4_default: i2c4-default { pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; drive-strength = <2>; bias-disable; }; i2c4_sleep: i2c4-sleep { pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; drive-strength = <2>; bias-pull-up; }; i2c5_default: i2c5-default { pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; drive-strength = <2>; bias-disable; }; i2c5_sleep: i2c5-sleep { pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; drive-strength = <2>; bias-pull-up; }; i2c6_default: i2c6-default { pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; drive-strength = <2>; bias-disable; }; i2c6_sleep: i2c6-sleep { pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; drive-strength = <2>; bias-pull-up; }; i2c7_default: i2c7-default { pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; drive-strength = <2>; bias-disable; }; i2c7_sleep: i2c7-sleep { pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; drive-strength = <2>; bias-pull-up; }; i2c8_default: i2c8-default { pins = "gpio30", "gpio31"; + function = "blsp_i2c8"; drive-strength = <2>; bias-disable; }; i2c8_sleep: i2c8-sleep { pins = "gpio30", "gpio31"; + function = "blsp_i2c8"; drive-strength = <2>; bias-pull-up; }; -- 2.30.1
