Add a basic thermal-zones configuration to make sure the SoC doesn't overheat itself to death.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 173 +++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index ffc18d0dee9e..08e499229396 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -521,6 +521,179 @@ modem_smp2p_in: slave-kernel { }; }; + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + /* + * According to what downstream DTS says, + * the entire power efficient cluster has + * only a single thermal sensor. + */ + + pwr-cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + pwr_cluster_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + pwr_cluster_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; -- 2.30.1
