This allows for automatic output source switching in userspace. Enable
the pullup on the GPIO to actually make it trigger and mark it as
active-high since detection is reversed otherwise.
Signed-off-by: Guido Günther <a...@sigxcpu.org>
---
.../dts/freescale/imx8mq-librem5-devkit.dts | 21 ++++++++++---------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index f818af592046..e3bfef98090a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -50,13 +50,6 @@ btn2 {
linux,code = <KEY_VOLUMEDOWN>;
};
- hp-det {
- label = "HP_DET";
- gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
- wakeup-source;
- linux,code = <KEY_HP>;
- };
-
wwan-wake {
label = "WWAN_WAKE";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
@@ -173,22 +166,25 @@ mic_mux: mic-mux {
sound {
compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hpdet>;
simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>;
simple-audio-card,name = "Librem 5 Devkit";
simple-audio-card,format = "i2s";
simple-audio-card,widgets =
"Microphone", "Builtin Microphone",
"Microphone", "Headset Microphone",
- "Headphone", "Headphone Jack",
+ "Headphone", "Headphones",
"Speaker", "Builtin Speaker";
simple-audio-card,routing =
"MIC_IN", "Mic Mux OUT",
"Mic Mux IN1", "Headset Microphone",
"Mic Mux IN2", "Builtin Microphone",
"Mic Mux OUT", "Mic Bias",
- "Headphone Jack", "HP_OUT",
+ "Headphones", "HP_OUT",
"Builtin Speaker", "Speaker Amp OUTR",
"Speaker Amp INR", "LINE_OUT";
+ simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
simple-audio-card,cpu {
sound-dai = <&sai2>;
@@ -630,7 +626,6 @@ pinctrl_gpio_keys: gpiokeygrp {
fsl,pins = <
MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16
MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16
- MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /*
HP_DET */
MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /*
nWoWWAN */
>;
};
@@ -641,6 +636,12 @@ MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /*
nHAPTIC */
>;
};
+ pinctrl_hpdet: hpdetgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0xC0 /*
HP_DET */
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f
--
2.30.0
